1. Finish-Ball |
Material: P20 |
 |
.500" 12W9H Finish Ball Nose
Insert: NPHG120400R IN2005
DOC: .025", WOC: 1.75"
RPM: 9670, SFM: 886, IPM: 183 |
 |
.375" 12W9F Finish Ball Nose
Insert: NPHG0903030R IN2005
DOC: .018", WOC: .05 "
RPM: 9823, SFM: 675, IPM: 203 |
|
| 2. Finish-Ball, Backdraft Blade |
Material: 4340 Steel
Tool: 12W9K-06015S6R01
Insert: GPHG152208R01, Grade: IN2005 |
Extension: 7.2 "
DOC: .007", WOC: .015 "
SFM: 1000, RPM: 6112, IPM: 219 |
|
| 3. Finish-Ball - Face Aluminum |
Material: Aluminum
Tool: .500" 12W9H Finish Ball Nose
Insert: NPHG120400R, Grade: IN05S
(polished) |
DOC: .075", WOC: .050 "
SFM: 1308, RPM: 9990, IPM: 240 |
|
| 4. Finish-Ball, Backdraft - Mold Cavity |
Operation: Rest Roughing, Closer Net Shape
Material: 4340 steel
Tool: GPHG 192516R01
Diameter: .75” Effective: 2
Insert: GPHG192516R01
Grade: IN2005
Shank: 12W5M-0722S7R02 (brazed, solid carbide) |
Extension from Spindle: 7.03”
DOC: .010” WOC: 025”
SFM: 700 RPM: 3565 IPM: 157 |
|
| 5. Finish-Ball, Backdraft - H13 |
Operation: Finish
Material: H13, Rc52
Tool: 12W5M-07022S7R02
Diameter: .750” Effective: 2 (cutting edges)
Insert: GPHG 192508R01 Grade: IN2005 |
Extension from holder: 7.0350”
DOC: .005” WOC: .007”
SFM: 950 RPM: 4838 IPM: 194 |
|
|
