Ingersoll Cutting Tools New Products

New Products

Ingersoll United States

Form-Master Pro
Now available! The Ultimate Automatic Tool Dispenser and Management System from Ingersoll Cutting Tools.

Finish-Ball
Now available! The Ultimate Automatic Tool Dispenser and Management System from Ingersoll Cutting Tools.

Matrix
Now available! The Ultimate Automatic Tool Dispenser and Management System from Ingersoll Cutting Tools.

Punch-In Quad
New additions to this recently introduced line of back-drafted cutters for Z-axis plunging. Great for long-reach roughing.

Chip-Surfer Product Updates
New solid carbide rough-fin with square-bottom end mill geometry and 2+2 roughing+finishing flutes. Exceptional in hi-temp alloys.

Aluminator
A new 2.5" diameter has been added to this line of face mills providing precision high-speed milling for aluminum.

Hi-Pos Deka Face Mills
10 indexes (5 on each side) per insert on one cutter! An ultra-strong cutting edge and a wiping flat combine for high performance roughing and smooth surface finishes.

New Hi-Pos Quad Inserts/Radii
A new rough-finish crowned wiping insert and new radii across the board join the previously released insert for hi-temp alloys and titanium.

Power-Quad Fluted End Mill
Ideal for roughing, the Power-Quad 23J6G now has even more robust and free-cutting nose stations.

Quad-Drill
New larger sizes mean that this high performance line of indexable drills now features 9 tools, all larger than 2 inches in diameter.

Aluminator
Perform precision high-speed milling on aluminum with these low- and high-density modular cutters and inserts with 4 cutting edges.

New S-Max Face Mills
The new S-Max face mill line featuring the DPM434R (18mm long) insert is now available in both 0 degree and 45 degree lead angle versions.

Qwik-Twist Drill/Chamfer Combo
Pre-Tap hole drilling and top chamfering with a single tool saves time, reduces tooling costs, and improves manufacturing efficiency.

Qwik-Twist Slip Fit
A new family of adjustable depth drilling and chamfering combination tools using standard Qwik•Twist replaceable drill points.

Larger Series Y 8:1 Drills
Five additional drill bodies now support drill sizes up through 1.020" diameter. Use a range of drill points (in a .040" diameter range, on the same drill body.

Corner Rounding End Mills
Available in Fast-Break Straight-Shank tools and Top-On Replaceable Modular tools as well as Fast-Break PAKs that include both tools and inserts.

Top-On Form-Master+
Now available in inch-style cutter body sizes, this versatile family features four different sizes of button-style inserts.

Top-On R8
Engrave Use your Top-On cutting heads on your Bridgeport adaption spindles. M12 and M16 threads now available.

Top-On CAT50
Integral Top-On Master Shanks available in a variety of lengths and all thread offerings.

FAK Spot-In Insert
Engrave part numbers, serial numbers, lot numbers, company logos, etc, all in the same machine set-up.

VF Chipbreaker
An exceptional chipbreaker insert for less vibration and premature insert chipping when turning at high feeds or DOCs on long or slender workpieces.

T-Clamp (Goes Modular)
The T-Clamp multifunction system now accepts a wide range of adapters for grooving, turning, parting off, and face machining.

T-Cap
Multifunctional tools that significantly reduce machining cycle time. One tool for drilling, boring, turning, and facing.

Inno-Fit
Strong drive design with 3-point clamping and self-centering connections. This heavy-duty modular tooling system allows you to change cutter heads right on the spindle.

Hi-Pos Micro
These high-feed mills incorporate the advantages of both a button and a back-drafted cutter. Extrememely high feed rates increase productivity.

Form-Master Speed
These high-feed mills incorporate the advantages of both a button and a back-drafted cutter. Extrememely high feed rates increase productivity.

Taegu Line T-Type Holders
These tool holders feature very secure insert clamping, achieving two directional forces with one action, for accurate indexing and increased tool life.

V-Max 90-deg Plunge Cutter
4 double-positive cutting edges per insert, efficient chip evacuation, and uses inserts from other V-Max cutters. For the entire V-Max line, click here.

V-Max 3-degree Face Mill
For roughing, one-cuts, and finish cuts. Finishes of 30 RMS in 4140 steel using no special wiper insert. For the entire V-Max line, click here.

Multi-Cut
High axial shear 45 degree face mill. Added 2" end mill with R8 shank and 3" face mill.

Recent Product News

Quad-Drill+
A larger corner radius for the SPLT14 insert dramaticall improves tool life. Cross-referencing TauguTec inserts.

New for Die & Mold Industry
T-Slot Pak for Retainer Rings
Include (4) Different Carbide Tips, (1) Shank, (1) Wrench.

Chip-Surfer Paks
Include (2) Carbide Tips, (1) Shank, (1) Wrench.

New from Ingersoll Cutting Tools
D'Andrea Modular Boring Systems
MHD Boring Tools
TOP RUN Balanceable Tool Holders
AUTO RADIAL Automatic Facing Heads
SENSITIV T-TA Boring/Facing/Grooving Heads
U CENTER & U TRONIC Medium and Large Boring & Facing Heads.

Quik-Twist Torque Keys
A special torque key has been developed for confirming minimum drill point clamping force required for reliable drilling performance.

New Quik-Twist Diameters
Several new sizes are available in the Qwik-Twist line of replaceable-point drills, down to .295" diameter and up to .862" diameter.

Qwik-Twist 8:1 Drills
These new additions to the Qwik-Twist line of replaceable-point drills can accomodate extended drilling depths to 8 times the drill diameter.

New Spot Drill
A new 144-degree indexable tool accomodates the 140-degree included point angle on solid carbide drills and the Qwik-Twist replaceable point drills.

Top-On Shanks
Rigidity, accuracy, and flexibility are obtained when using Top-On modular shanks. Shanks marry with extensions, reducers, and many various cutter heads.

V-Max
Strength, Economy, and Smooth Cutting. Coarse-, Medium-, and High-Density Face Mills and Right- and Left-Handed Half-Side Mills
Detailed information here.

Flex-Lok
Precision Control for Short-Chipping Metals. Near neutral geometry provides maximum edge strength and proper chip control.

Octagon Mill - Roto-Mill
45 degree lead, higher density, free-cutting economical face mills. 8 indexes per insert. New Polished/Sharp 6mm insert to cut Aluminum.

Power-Quad+
High axial shear 45 degree face mill. New medium density cutter designs and grade IN1030 have just been added.

Form-Master V
Indexable Back Draft Finishing Cutters in straight-shank and modular designs.