NewProducts
BORELine For Archived Products, Go HERE


Deep-Trio

Deep Hole Drills
Updated 8/16

ePIP Product Page



Rapid Thread
Solid Carbide Threadmills

Updated 7/16
ePIP Product Page


Improved Drill-In

Series DJ/DH Drills
Added 5/16

New-242 (2.9MB PDF)


Gold-Twist

Updated 3/16

ePIP Product Page



D'Andrea Digital Heads

Updated 2/16

ePIP Product Page

Gold-Twin Large Diameter Drilling
Updated 1/16

ePIP Product Page



Rapid Thread Indexable Helical Threadmills

Updated 9/15
New-129-1 (2.9MB PDF)


Spade-Twist

for Large-Diamter Holes
Updated 9/15

ePIP Product Page

Gold-Twist, Double Margin Heads
Added 7/15

ePIP Product Page



Deep Drilling Head Solid Carbide Pads

Added 6/15
NEW-224 (1.6MB PDF)


Gold-Twist, Flat Bottom Tips

Updated 6/15

ePIP Product Page



Rapid Thread Indexable Straight Threadmills

Updated 6/15
New-220 (1MB PDF)

Quad-Twist

Updated 4/15

ePIP Product Page



Gold-Twist Chamfer

Updated 3/15
ePIP Product Page

Gold-Twist, 12XD Expansion

Updated 2/15

ePIP Product Page



TBTA-H Fixed-Pocket, Indexable BTA Drill Heads

Updated 1/15

ePIP Product Page



TBTA-C, TBTA-D Insert & Guide Pad Phaseout

Added 12/14
JOB-043 (600KB PDF)


Drill-In Solid Pre-Thread Drill

Updated 1/14
NEW-178 (456KB PDF)

Qwik-Ream

Updated 12/13

ePIP Product Page



Drill-In & Drill-In XL

Updated 11/13

ePIP Product Page



Brazed Head Grade Consolodation

for BTA heads
Added 11/12
JOB-028 (528KB PDF)


D'Andrea Precision Boring

Added 7/12
CAT-022 (19.1MB PDF)

Quad-Drill+ Adj-Cart
NEW-115 (6.4MB)

 

Quad-Drill+5X - Quad-Drill Larger Sizes
NEW--41.2 (2.9MB)

 

Uni-Dex Reamer
NEW-100 (2.3MB)

 

Quad-Drill+ 5X

NEW-070-2 (208KB)

Quad-Drill+ QF Series 3:1
NEW-102 (560KB)

 

Grade IN6520 - for Quad-Drill+
NEW-065 (700KB)

 

Chipbreaker HP Insert - for Quad-Drill+ Aluminum Drilling

NEW-071 (624KB)

Qwik-Adjust Adjustable Arbor

NEW-086 (800KB)

 

BTA Drills Catalog

Cat-012 (3.8MB)

 

D'Andrea Modular Boring Systems

Watch Footage on IngersollTV

Hole Making Catalog

Cat-002-2 (4.4MB)


Di-Pos Tetra
12mm & 16mm

Cutting-Edge Inserts

Updated 2/16

ePIP Product Page


Di Pos-Hexa 90 Degree

Updated 1/16

ePIP Product Page


Di-Pos Tetra
w/6mm Inserts

Updated 9/15

ePIP Product Page


ISO Plus Quad 90

Updated 7/15

8 Cutting Edges

NEW-114-2 (2MB PDF)


Cougar Mill

Edge Strength &

Power-Shear Tech
Added 7/15

ePIP Product Page


Gold-Quad ExtCut

(formerly Hi-Quad ExtCut)
Updated 7/15

ePIP Product Page


Iso-Plus High-Feed

Updated 05/15

ePIP Product Page


Gold-Quad Plunge (formerly Hi-Quad Plunge)

for Roughing in SS

& Exotic Materials
Updated 6/14

ePIP Product Page


HiPos-Trio
1 Insert...
3 Geometries!

Updated 4/13
NEW-148-1 (2.2MB PDF)

Hi-Pos+
Center-Cutting

Added 1-13
NEW-171 (2.5MB PDF)

Di Pos-Hexa

Updated 12/12

ePIP Product Page


Octo-Plus
Expanded Insert

Selection Guide

Added 11/12
JOB-026 (1MB PDF)

Chiper-Surfer & Solid Carbide
Cat-019-1 (13.5MB)

 

Hi-Pos Quad Micro
PDF File (888KB)

 

Power-Quad+ High Shear Face Mill
PDF File (888KB)

Octo-Plus OP1N/OP6N - Wiper Edges/Inserts
NEW-125 (1.3MB)

 

Octo-Plus - 16-Edge Inserts
NEW-122.1 (1MB)

 

ISO Plus Quad 90 - 8 Cutting Edges

NEW-114 (812KB)

ISO Plus Quad 45 & 75 - 8 Cutting Edges
NEW-101.2 (812KB)

 

Hi-Pos Quad

NEW-112.1 (1.1MB)

 

Deka Family

BRO-044.1 (3.6MB)

 

Fast-Break Catalog Update
PDF File (464KB)

Rough-Air for Aerospace

NEW-103 (700KB)

 

Screw-Held Chase-Octo

PDF File (620KB)

 

ER Coller - for Swiss-Style & Lathe Live Tooling

NEW-097 (2.2MB)

 

Hi-Pos Micro

BRO-027 (766KB)

Quad Plus Finish

NEW-090 (844KB)

 

Hi-Pos Micro High-Feed
NEW-088 (220KB)


Gold-Quad F

Including 09mm Insert
Updated 4/16

ePIP Product Page


Power-Feed 13+

Added 3/16

High-Feed Milling Up To 2mm DOC
ePIP Product Page


Pro-Duo

Updated 1/16

Roughing and Semi-Finishing Ball Nose
ePIP Product Page


Hi-Feed Mini

Updated 11/15

Now includes Chip-Surfer
NEW-113-3 (1.2MB PDF)


Form Master Shear

Updated 06/15

ePIP Product Page


Hi-Feed Midi

Added 06/14

ePIP Product Page


Finish-Ball Ball Nose for Contour Milling

Updated 04/14

ePIP Product Page


Pro-Trio

Updated 08/12
NEW-162-1 (1.6MB PDF)


Form-Master R

End & Face Mills w/Economical Double Sided Inserts
Added 04/12
NEW-159 (2.4MB PDF)

Form-Master Wave Button
BRO-042.3 (1.6MB)

 

Pro-Ball End Mill
NEW-110.1 (947KB)

 

Form-Master Wave Button
BRO-042.2 (1.3MB)

 

Form-Master Pro
BRO-036.1 (1.3MB)

Watch Footage on IngersollTV

 

Top-On & R8 Tool Kits

NEW-048-2 (215KB)

 

Top-On Carbide Shank - for Finish Ball

NEW-104 (1.2MB)

 

Power-Feed+

BRO-045 (1.3MB)

 

Form-Master Cera
BRO-038 (660KB)

Plunging Cutters
BRO-034 (2MB)

 

Form-Master V

 

Top-On Form-Master Plus

NEW-053 (231KB)

 

Form-Master Speed
BRO-026 (618KB)

roundLine For Archived Products, Go HERE
Rough Fin RoundsPower-Rounds
Pro-Rounds

PVD-Coated Grade IN2203
for Hardened Steel
NEW-240 (2.9MB PDF)
Rough Fin RoundsHyper-Rounds
47C_RQ 4-flute with Differential Helix & Variable Pitch in Grade 2505
NEW-237 (588KB PDF)
Rough Fin RoundsStedi-Rounds
Balanced Solid Endmills for Machining Aluminum
Updated 9/14
NEW-185-3 (630KB PDF)
Hyper-RoundsTek-Rounds
Different Helix, Chamfered Cutting Edge for Titanium
Updated 10/15
ePIP Product Page
Pro-RoundsPro-Rounds
Center-Cutting Ball Nose for Profiling
Updated 8/15
NEW-120-4 (982KB PDF)
Hyper-RoundsHyper-Rounds
6-20 Flute Endmills

with Different Helix and Variable Pitch
Added 9/14
ePIP Product Page

Rough Fin RoundsStedi-Rounds
Solid Chip-Splitting Endmills w/Central

Coolant for Aluminum
Updated 9/14
NEW-183-1 (1.2MB PDF)

Rough Fin RoundsStedi-Rounds
Solid Endmills w/Side Coolant for Machining Aluminum
Updated 9/14
NEW-186-1 (3.5MB PDF)
Stedi-RoundsStedi-Rounds
3-Flute, Variable-Helix

for Aluminum
Updated 9/14
ePIP Product Page

Rough Fin RoundsTek-Rounds
EPN-F Solid Endmills

for Maching CFRP &

Honeycomb Parts
Updated 1/14
ePIP Product Page

Hyper-RoundsHyper-Rounds
New Concept Solid Endmills for Aluminum
Added 1/14
NEW-182 (1.4MB PDF)
Hyper-RoundsHyper-Rounds
Var-Pitch End Mills w/Diff. Helix Angles & Rel'd Necks
Added 4/12
ePIP Product Page
Hyper-RoundsHyper-Rounds
4-Flute End Mills w/Variable-Pitch,

Different Helix Angle
Added 4/12
ePIP Product Page

Hyper-RoundsHyper-Rounds
5-Flute End Mills w/Variable-Pitch,

Different Helix Angle
Added 4/12
ePIP Product Page

Feed RoundsFeed-Rounds
Allow Greatly Increased Feed Rates
Updated 4/12
NEW-118-3 (1.1MB PDF)
Stedi-RoundsStedi-Rounds
4- and 5-Flute, Variable-Pitched, w/Corner Radium
Added 4/12
NEW-153 (1.5MB PDF)
stedi-RoundsStedi-Rounds
Variable-Pitched Flutes, Maximium Stock Removal
Updated 4/12
NEW-121-3 (1.5MB PDF)
Rough Fin RoundsRoughFin-Rounds
Roughing & Finishing

in a Single Tool
Updated 4/12
NEW-116-3 (1.1MB PDF)

Power RoundsPower-Rounds
Wide Variety of Geometry

& Flute Styles
Updated 4/12
NEW-117-2 (4.3MB PDF)

3n1 rounds3n1-Rounds
The Optimal Solution for

All Roughing Operations
Updated 4/12
ePIP Product Page

Chiper-Surfer & Solid Carbide
Cat-019-1 (13.5MB)

turnLine For Archived Products, Go HERE


Grade TC3020 + TC3030

New T-Turn Grade
Updated 11/16

ePIP Product Page


pcd_grade_td810
Gold-Rhino
(formerly T-Tank)
YNMG Geometry

Added 8/16

ePIP Product Page


Black-Rush

NEW Turning Grades for Gray & Ductile Cast Iron
Updated 4/16

ePIP Product Page

pcd_grade_td810
T-Mini Boring Bars

Updated 4/16

ePIP Product Page


T-Burst

Updated 1/16

ePIP Product Page

pcd_grade_td810
KT Chip-Breaker

for Rough Turning Cast Iron
Updated 10/15
ePIP Product Page

pcd_grade_td810
Gold-Rhino
(formerly T-Tank)
MK Chip-Breaker

Added 8/15

ePIP Product Page

fs chipbreakers
Gold-Rhino
(formerly T-Tank)
FS Chip-Breaker

Added 6/15

ePIP Product Page


Gold-Life+ for High Speed Steel Turning

Added 6/15

ePIP Product Page


T-Micro

Updated 1/15

ePIP Product Page

pcd_grade_td810
Gold-Rhino
(formerly T-Tank)
ISO Turning Inserts

Including DNUX & WNMX Inserts & Now Swiss-Turning Holders
Updated 1/15

pcd_grade_td810
Gold-Rhino
(formerly T-Tank)
ML Chip-Breaker

Added 11/14

ePIP Product Page

pcd_grade_td810
Gold-Flex Threading Insert Expansion

Added 11/14

ePIP Product Page

pcd_grade_td810
Grade TT8105

Featuring GoldLife+ Technology
For Turning Steel at High Cutting Speeds
Added 10/14

ePIP Product Page

pcd_grade_td810
FX Chipbreaker

Takes ball stud
and pulley machining to a new level.
Added 4/14

ePIP Product Page


Gold-Flex

Including Chipbreaker Inserts and Modular Adapters
Updated 3/14

ePIP Product Page

pcd_grade_td810
PCD Grade TD810

Added 11/13
NEW-180 (1MB PDF)


T-Turn
EM Chipbreaker

Updated 06/13

ePIP Product Page


T-Clamp Ultra+ Special Insert Program

Added 2/13
JOB-030 (4.9MB PDF)


TT5080

NEW Grade for Lathe Threading Applications
Added 8/12

ePIP Product Page


TC430 Whisker Ceramic Grade

Added 7/12

ePIP Product Page


CBN Grades

Added 7/12

ePIP Product Page


T-Feed

NEW HF
Chip-Breaker Insert
Added 5/12

ePIP Product Page


Mini-Turn

SA Chipbreaker
Added 11/11
NEW-138 (968KB PDF)

T-Clamp for Small ID Turning & Grooving
NEW-125 (1.5MB)

 

Gold-Duty HB Chipbreaker
NEW-134 (3.6MB)

 

Turning Catalog
CAT-011


Grade TT9200

NEW-111 (568KB)

 

Grade TT8125
NEW-109 (588KB)

 

Deep Face Groove Blades

NEW-105 (1.0MB)

 

PC Chipbreaker

PDF File (1.0MB)

 

T-Cast Grd TT7310

NEW-082 (3.3MB)

Grade TT8115
NEW-084 (844KB)

 

TaeguLine New Products
BRO-040 (5.6MB)

 

AB2010 Hard Part Turning Insert
NEW-076 (1.1MB)

 

New Wiper Geom. for Ceramic/CBN Inserts
NEW-175 (1.2MB)

Mini Turn

NEW-073 (4MB)

 

Chip-Breakers for Exotic Mat'ls

NEW-074 (2.2MB)

 

Hex-Turn
NEW-072 (2.1MB)

 

Grade TT7100

NEW-064 (749KB)

T-Type Holders

 

VF Chipbreaker
NEW-044 (152KB)

 

T-Clamp Goes Modular
NEW-042 (229KB)

 

T-Cap
BRO-022 (698KB)

 

TaeguTmill
CAT-007 (2.2MB)

T-Clamp Ultra
CAT-78005839 (6.5MB)

maxLine For Archived Products, Go HERE


Black-Max

Heavy Duty Facemill

45-Degree Lead

"Shear Clear"
Added 9/15

ePIP Product Page


Gold-Max 4 FFIN

Updated 5/13
NEW-169-1 (1.9MB PDF)

New MAX-Line Inserts

Added 11/12
NEW-172 (838KB PDF)

Thin-Max

Added 11/12
Axial and Radial Drive
NEW-168-1 (1.7MB PDF)

Evo-Tec Mini - End & Face Mills
NEW-123.1 (3MB)

 

Evo-Tec - End & Face Mills
NEW-096.1 (1.6MB)
Watch Footage on IngersollTV

 

Evo-Tec -14mm Insert Face Mills
NEW-108 (605KB)
Watch Footage on IngersollTV

S-Max High-Feed Face Mills
NEW-106 (686KB)

 

S-Max Finishing Face Mills
NEW-080 (1.4MB)

 

V-Max Plunge Cutter

 

V-Max 3-Deg Face Mill

 

S-Max/V-Maxs
CAT-008 (1.4MB)

S-Max 18mm Insert
NEW-033 (1.2MB)

General For Archived Products, Go HERE


Tedi-Feed

PCD & CBN Tangential Milling
Updated 5/15

ePIP Product Page


IT.TE.DI

Product News
Updated 5/13

JOB-034-1 (763KB PDF)


MATRIX

Updated 9/12

ePIP Product Page


Qwik-Light,

Qwik-Torque Driver
Updated 2/12
NEW-07801 (3.9MB PDF)

holders For Archived Products, Go HERE


Toolholders Catalog

CAT-013-1 (7.6MB PDF)

Top-On Shanks

 

Top-On CAT-50
NEW-051 (96KB)

 

Inno-Fit
BRO-025 (570KB)