Series: 47C_RQ - 90° End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø.250-1.000"
- Cylindrical Shank
- 4 Flute, 38° Helix
- Variable pitch chamfered or radius corners
EDP |
Part Number |
DC Cutting Dia. |
RE/CHW Corner Radius/Chamfer |
APMX Depth of Cut Max. |
LUX Usable Length Max. |
LPR Projection Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3029964 | 47C-1803R5RQ00 IN2005 | 0.1875 | 0.006 Chamfer | 0.375 | - | 0.565 | 2.00 | 4 | 0.188 | 5.0 | NA | NA | NA | |
| 6251066 | 47C-2505R6RQ01 IN2005 | 0.2500 | 0.010 Chamfer | 0.500 | - | 0.750 | 2.50 | 4 | 0.250 | - | NA | NA | NA | |
| 6251078 | 47C-2563R6RQ08 IN2005 | 0.2500 | 0.008 Chamfer | 0.630 | - | - | 2.50 | 5 | 0.250 | - | NA | NA | NA | |
| 3029966 | 47C-3106R7RQ01 IN2005 | 0.3125 | 0.012 Chamfer | 0.630 | - | 1.000 | 2.50 | 4 | 0.313 | - | NA | NA | NA | |
| 6251079 | 47C-3178R7RQ01 IN2005 | 0.3125 | 0.010 Chamfer | 0.780 | - | - | 2.50 | 5 | 0.313 | - | NA | NA | NA | |
| 6251067 | 47C-3707R8RQ01 IN2005 | 0.3750 | 0.015 Chamfer | 0.750 | - | 1.250 | 3.00 | 4 | 0.375 | - | NA | NA | NA | |
| 6251080 | 47C-3794R8RQ01 IN2005 | 0.3750 | 0.012 Chamfer | 0.940 | - | - | 3.00 | 5 | 0.375 | - | NA | NA | NA | |
| 6251069 | 47C-5010S4RQ02 IN2005 | 0.5000 | 0.020 Chamfer | 1.000 | 1.500 | 1.500 | 3.50 | 4 | 0.500 | - | NA | NA | NA | |
| 6251071 | 47C-6212S6RQ02 IN2005 | 0.6250 | 0.024 Chamfer | 1.250 | 1.700 | 1.700 | 4.00 | 4 | 0.625 | - | NA | NA | NA | |
| 6251073 | 47C-7515S7RQ02 IN2005 | 0.7500 | 0.024 Chamfer | 1.500 | 2.250 | 2.250 | 5.00 | 4 | 0.750 | - | NA | NA | NA | |
| 6251086 | 47C-7518S7RQ02 IN2005 | 0.7500 | 0.020 Chamfer | 1.870 | - | - | 5.00 | 5 | 0.750 | - | NA | NA | NA |
