Series: 15X1Z - 90° Aluminum Router End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø2.000
- Weldon Shank
- 33mm Insert with 2 indexes
- .99" Depth of cut
- 2-Screw clamping ideal for high MRR
- Finishes as good as 15 Ra
- Insert corners: .031" .062" .125" .250" R
EDP |
Part Number |
DC Cutting Dia. |
LPR Protruding Length |
LF Functional Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3008101 | 15X1Z-2002581R01 | 2.000 | - | 2.50 | 4.75 | 2 | 1.2500 | 15.0 | ||||
| 3008682 | 15X1Z-2002581R02 | 2.000 | 2.50 | 2.50 | 4.75 | 2 | 1.2500 | 15.0 | n/a | n/a |
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts)
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw at cutter face.
