Series: 12J1M (8 mm Insert) Weldon Shank
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- 90° End Mill
- .30" Max. Depth of Cut
- Insert Corner: .015" and .031" R
- Insert with 2 Indexes
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
LPR Protruding Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3003949 | 12J1M-0701284R01 | 0.750 | 1.20 | 1.25 | 3.25 | 3 | 0.7500 | 1.0 | NA |
Notes:
- ** Note, OBSOLETE product line ** Refer to the Product Bulletin Tab for the Phase Out Notice that lists stocked alternatives.
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
LPR Protruding Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3003946 | 12J1M-0300778R01 | 0.375 | 0.10 | 0.72 | 2.50 | 1 | 0.5000 | - | NA | |||
| 3003947 | 12J1M-0501079R01 | 0.500 | 0.99 | 1.09 | 3.00 | 1 | 0.6250 | 1.6 | NA | |||
| 3003948 | 12J1M-0601079R01 | 0.625 | 1.06 | 1.09 | 3.00 | 2 | 0.6250 | 1.2 | NA | |||
| 3003949 | 12J1M-0701284R01 | 0.750 | 1.20 | 1.25 | 3.25 | 3 | 0.7500 | 1.0 | NA | |||
| 3003950 | 12J1M-1001280R01 | 1.000 | 1.20 | 1.25 | 3.50 | 4 | 1.0000 | 0.7 | NA | NA |
