Series: 5J1E - 90° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø1.50-3.00"
- .31" Depth of cut
- 8 mm Insert with 4 indexes
- Insert corners: .020", .031", .062" R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3012739 | 5J1E-15R01 | 1.500 | 1.570 | 5 | 0.5000 | 0.250 | 1.5 | NA |
Notes:
- **Note, OBSOLETE product series.
- Refer to the following for stocked alternatives:
- DiPosDuo, series TJ5F TJ6F
- DiPosQuad, series DJ5E DJ6E
- DiPosTrio, series DJ5F
- HiPosTrio, series KJ5D KJ6D
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3012739 | 5J1E-15R01 | 1.500 | 1.570 | 5 | 0.5000 | 0.250 | 1.5 | NA | |||
| 3012740 | 5J1E-20R01 | 2.000 | 1.570 | 6 | 0.7500 | 0.312 | 1.2 | NA | NA | NA | |
| 3012742 | 5J1E-25R01 | 2.500 | 1.570 | 5 | 0.7500 | 0.312 | 1.0 | NA | NA | NA | |
| 3012741 | 5J1E-25R02 | 2.500 | 1.570 | 7 | 0.7500 | 0.312 | 1.0 | NA | NA | NA | |
| 3012744 | 5J1E-30R01 | 3.000 | 1.750 | 7 | 1.0000 | 0.375 | 0.5 | NA | NA | NA | |
| 3012743 | 5J1E-30R02 | 3.000 | 1.750 | 9 | 1.0000 | 0.375 | 0.5 | NA | NA | NA | |
| 3019503 | 5J1E-40R01 | 4.000 | 2.000 | 10 | 1.5000 | 0.625 | - | NA | NA | NA | |
| 3019504 | 5J1E-40R02 | 4.000 | 2.000 | 7 | 1.5000 | 0.625 | - | NA | NA | NA |
