Series: 2J1G - 90° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø2.000 - 8.000"
- Bore & Keyway
- .63" Depth of Cut
- 17 mm Insert with 2 indexes
- 32-63 Ra finish when engaging the wiper
- Insert radii: .015", .031", .062", .093", .125", .156", .187", .250" R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
DBC Bolt Circle Dia. |
CSP Coolant |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3018669 | 2J1G-20R01 | 2.000 | 1.570 | 5 | 0.7500 | 0.312 | NA | Yes | ||||
| 3018668 | 2J1G-20R02 | 2.000 | 1.570 | 3 | 0.7500 | 0.312 | NA | Yes | ||||
| 3018666 | 2J1G-25R01 | 2.500 | 1.570 | 6 | 0.7500 | 0.312 | NA | Yes | ||||
| 3018671 | 2J1G-30R01 | 3.000 | 1.750 | 7 | 1.0000 | 0.375 | NA | Yes | ||||
| 3018670 | 2J1G-30R02 | 3.000 | 1.750 | 4 | 1.0000 | 0.375 | NA | Yes | ||||
| 2917447 | 2J1G-40R03 | 4.000 | 2.375 | 8 | 1.5000 | 0.625 | NA | Yes | ||||
| 2917448 | 2J1G-40R04 | 4.000 | 2.375 | 6 | 1.5000 | 0.625 | NA | Yes | ||||
| 2917449 | 2J1G-50R02 | 5.000 | 2.375 | 9 | 1.5000 | 0.625 | NA | Yes | ||||
| 2931507 | 2J1G-50R04 | 5.000 | 2.375 | 7 | 1.5000 | 0.625 | NA | Yes | n/a | |||
| 3018675 | 2J1G-60R01 | 6.000 | 2.000 | 10 | 2.0000 | 0.750 | NA | No | ||||
| 3018674 | 2J1G-60R02 | 6.000 | 2.000 | 8 | 2.0000 | 0.750 | NA | No | ||||
| 3018676 | 2J1G-80R01 | 8.000 | 2.370 | 12 | 2.5000 | 1.000 | 4.00 | No |
Notes:
- Relieve cutter body when using insert corner radii larger than R.094 (see product bulletin).
- BOMT17 produces slightly smaller diameter (up to .007") for cutters 3.00" and larger.
