Series: 45NRA - 90° End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø3-12 mm
- Cylindrical Shank (Metric)
- 2 Flute, 45° Helix
- 90° point, chamfering, countersink, spot drill
EDP |
Part Number |
DC Cutting Dia. |
APMX Depth of Cut Max. |
LPR Projection Length |
ZEFF Eff. Teeth |
FHA Flute Helix Angle |
DCON Shank Dia. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2944261 | 45N00313T9RA600 IN2005 | 3.00 mm | 1.37 mm | 10.0 mm | 2 | 25 | 3.00 mm | NA | NA | NA | |
| 2944254 | 45N00313T9RA600 IN05S | 3.00 mm | 10.00 mm | 10.0 mm | 2 | 25 | 3.00 mm | NA | NA | NA | |
| 5623296 | 45N00417U0RA500 IN2005 | 4.00 mm | 1.79 mm | 23.0 mm | 2 | 25 | 4.00 mm | NA | NA | NA | |
| 2944255 | 45N00417U0RA500 IN05S | 4.00 mm | 1.79 mm | 8.0 mm | 2 | 25 | 4.00 mm | NA | NA | NA | |
| 2944256 | 45N00522U1RA500 IN05S | 5.00 mm | - | - | 2 | 25 | 5.00 mm | NA | NA | NA | |
| 2944262 | 45N00522U1RA500 IN2005 | 5.00 mm | 2.24 mm | 23.0 mm | 2 | 25 | 5.00 mm | NA | NA | NA | |
| 2944263 | 45N00627T7RA500 IN2005 | 6.00 mm | - | - | 2 | 25 | 6.00 mm | NA | NA | NA | |
| 2944257 | 45N00627T7RA500 IN05S | 6.00 mm | 2.71 mm | 21.0 mm | 2 | 25 | 6.00 mm | NA | NA | NA | |
| 2944264 | 45N00836T0RA630 IN2005 | 8.00 mm | - | - | 2 | 25 | 8.00 mm | NA | NA | NA | |
| 2944258 | 45N00836T0RA630 IN05S | 8.00 mm | 3.63 mm | 27.0 mm | 2 | 25 | 8.00 mm | NA | NA | NA | |
| 2944265 | 45N01045T1RA720 IN2005 | 10.00 mm | - | - | 2 | 25 | 10.00 mm | NA | NA | NA | |
| 2944259 | 45N01045T1RA720 IN05S | 10.00 mm | 4.55 mm | 32.0 mm | 2 | 25 | 10.00 mm | NA | NA | NA | |
| 2944266 | 45N01254T2RA730 IN2005 | 12.00 mm | - | - | 2 | 25 | 12.00 mm | NA | NA | NA | |
| 2944260 | 45N01254T2RA730 IN05S | 12.00 mm | 5.44 mm | 28.0 mm | 2 | 25 | 12.00 mm | NA | NA | NA |
