Series: TCAP R/L 3:1-M (Metric, Heavy Metal)
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Holders, metric shanks
- Heavy Metal Bodies
EDP |
Part Number |
DC Cutting Dia. |
DMIN Min. Bore Dia. |
WF Functional Width |
LU Usable Length |
LF Functional Length |
OAL Overall Length |
DCON Shank Dia. |
CNT Coolant Entry Thread Size |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3201915 | TCAP08R-3.0DN12 | - | - | - | 24.0 mm | - | 80.0 mm | 12.00 mm | 1/16 BSPP | ||||
| 3203873 | TCAP10R-3.0DN-GV | 10.00 mm | 12.00 mm | 7.1 mm | 30.0 mm | 84.6 mm | 85.0 mm | 12.00 mm | 1/16 BSPP | ||||
| 3203874 | TCAP12L-3.0DN-GV | 12.00 mm | 14.50 mm | 8.5 mm | 36.0 mm | 94.6 mm | 95.0 mm | 16.00 mm | 1/8 BSPP | ||||
| 3203875 | TCAP12R-3.0DN-GV | 12.00 mm | 14.50 mm | 8.5 mm | 36.0 mm | 94.6 mm | 95.0 mm | 16.00 mm | 1/8 BSPP | ||||
| 3203876 | TCAP14L-3.0DN-GV | 14.00 mm | 16.50 mm | 9.5 mm | 42.0 mm | 99.5 mm | 100.0 mm | 16.00 mm | 1/8 BSPP | ||||
| 3203877 | TCAP14R-3.0DN-GV | 14.00 mm | 16.50 mm | 9.5 mm | 42.0 mm | 99.5 mm | 100.0 mm | 16.00 mm | 1/8 BSPP | ||||
| 3203878 | TCAP16L-3.0DN-GV | 16.00 mm | 19.00 mm | 11.1 mm | 48.0 mm | 109.4 mm | 110.0 mm | 20.00 mm | 1/8 BSPP | ||||
| 3203880 | TCAP20L-3.0DN-GV | 20.00 mm | 23.50 mm | 13.2 mm | 60.0 mm | 129.4 mm | 130.0 mm | 25.00 mm | 1/8 BSPP | ||||
| 3203881 | TCAP20R-3.0DN-GV | 20.00 mm | 23.50 mm | 13.2 mm | 60.0 mm | 129.4 mm | 130.0 mm | 25.00 mm | 1/8 BSPP | ||||
| 3203882 | TCAP25L-3.0DN-GV | 25.00 mm | 29.00 mm | 16.5 mm | 75.0 mm | 149.2 mm | 150.0 mm | 32.00 mm | 1/8 BSPP | ||||
| 3203883 | TCAP25R-3.0DN-GV | 25.00 mm | 29.00 mm | 16.5 mm | 75.0 mm | 149.2 mm | 150.0 mm | 32.00 mm | 1/8 BSPP | ||||
| 3203884 | TCAP32L-3.0DN-GV | 32.00 mm | 36.50 mm | 20.5 mm | 96.0 mm | 184.1 mm | 185.0 mm | 40.00 mm | 1/8 BSPP | ||||
| 3203885 | TCAP32R-3.0DN-GV | 32.00 mm | 36.50 mm | 20.5 mm | 96.0 mm | 184.1 mm | 185.0 mm | 40.00 mm | 1/8 BSPP |
Notes:
- DMIN only applies to holders that accept grooving inserts.
