Series: 1TJ1C - 90° & Hi-Feed End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø.500-1.000"
- Cylindrical Shank
- 5 mm Insert with 2 indexes
- 90°: .18" DOC, Hi-Feed: .02" DOC
- Insert corners: .008" .015" .031" R & Hi-Feed
- 32-63 Ra surface finishes when engaging the wiper (WEP)
- Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress
EDP |
Part Number |
DC Cutting Dia. |
LUX Usable Length Max. |
LPR Protruding Length |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Shank Dia. |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2910938 | 1TJ1C-05012S4R01 | 0.500 | 0.75 | 1.22 | 3.00 | 2 | 0.5000 | 6.9 | ||||
| 2910940 | 1TJ1C-06020S6R01 | 0.625 | 1.25 | 2.09 | 4.00 | 3 | 0.6250 | 4.4 | ||||
| 2910942 | 1TJ1C-07030S7R01 | 0.750 | 1.25 | 3.00 | 5.00 | 4 | 0.7500 | 3.3 | ||||
| 2910945 | 1TJ1C-10037S1R01 | 1.000 | 1.25 | 3.75 | 6.00 | 5 | 1.0000 | 2.2 |
Notes:
- Designed with modification in mind
- Extend usable length by turning back the neck diameter or shorten the overall length by cutting off back end
