Series: 46W_0 - Taper Form Finisher
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø8.0-16.0 mm
- Chip Surfer Connection
- 3 Flute, 30° helix, 0.02 mm profile tolerance
- Non-center cutting ball tip
- 1.5, 2.0, 3.0 & 4.0 R nose
- Ideal for finishing blisks, impellers & turbine rotors
EDP |
Part Number |
DC Cutting Dia. |
PRFRAD1 Profile Radius 1 |
PRFRAD2 Profile Radius 2 |
PRFRAD3 Profile Radius 3 |
APMX Depth of Cut Max. |
LF Functional Length |
ZEFF Eff. Flutes |
FHA Flute Helix Angle |
CCMS Connection Code Machine Side |
DHUB Hub Dia. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5890823 | 46W08009TQRB010 IN2005 | 8.00 mm | 1.50 mm | 250.00 mm | 4.00 mm | 9.50 mm | 15.40 mm | 3 | 30 | Chip Surfer T05 | 7.60 mm | ||||
| 5890824 | 46W10013T6RB020 IN2005 | 10.00 mm | 2.00 mm | 250.00 mm | 5.00 mm | 13.50 mm | 19.40 mm | 3 | 30 | Chip Surfer T06 | 9.30 mm | ||||
| 5890825 | 46W12013T8RB030 IN2005 | 12.00 mm | 3.00 mm | 250.00 mm | 6.00 mm | 13.50 mm | 23.40 mm | 3 | 30 | Chip Surfer T08 | 11.50 mm | ||||
| 5890826 | 46W16017TRRB040 IN2005 | 16.00 mm | 4.00 mm | 500.00 mm | 8.00 mm | 17.00 mm | 26.00 mm | 3 | 30 | Chip Surfer T10 | 15.20 mm |
Notes:
- When assembling, be sure tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
