Series: KJ5G, KJ6G - 90° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø50-125 mm
- 11 mm Depth of Cut
- 10 mm Insert with 3 indexes
- 32-63 Ra surface finishes when engaging the wiper (WEP)
- Insert corners: 0.4, 0.8, 1.6 & 2.4 mm R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3031307 | KJ5G050R00 | 50.00 mm | 40.00 mm | 5 | 22.00 mm | 10.40 mm | 1.5 | NA | NA | NA | |
| 3057621 | KJ6G050R00 | 50.00 mm | 40.00 mm | 4 | 22.00 mm | 10.40 mm | 1.5 | NA | NA | NA | |
| 3031308 | KJ5G063R00 | 63.00 mm | 40.00 mm | 6 | 22.00 mm | 10.40 mm | 1.1 | NA | NA | NA | |
| 3057622 | KJ6G063R00 | 63.00 mm | 40.00 mm | 4 | 22.00 mm | 10.40 mm | 1.1 | NA | NA | NA | |
| 3031316 | KJ5G080R00 | 80.00 mm | 50.00 mm | 8 | 27.00 mm | 12.40 mm | 0.8 | NA | NA | NA | |
| 3057623 | KJ6G080R00 | 80.00 mm | 50.00 mm | 6 | 27.00 mm | 12.40 mm | 0.8 | NA | NA | NA | |
| 3031306 | KJ5G100R00 | 100.00 mm | 50.00 mm | 10 | 32.00 mm | 14.40 mm | 0.6 | NA | NA | NA | |
| 3057624 | KJ6G100R00 | 100.00 mm | 50.00 mm | 8 | 32.00 mm | 14.40 mm | 0.6 | NA | NA | NA | |
| 3031311 | KJ5G125R00 | 125.00 mm | 63.00 mm | 12 | 40.00 mm | 16.40 mm | 0.5 | NA | NA | NA | |
| 3057625 | KJ6G125R00 | 125.00 mm | 63.00 mm | 9 | 40.00 mm | 16.40 mm | 0.5 | NA | NA | NA |
