Series: EJ5C, EJ6C - 90° High-Density Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Product Series Features:
- Ø1.500-4.000"
- 11 mm insert with 4 indexes
- .385" Max. Depth of Cut
- Insert corners: .031", .062", .125" R
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2925711 | EJ6C-02R02 | 2.500 | 1.570 | 6 | 0.7500 | 0.312 | 0.6 |
Notes:
- Insert screw tightening torque: 25-30 in*lb.
- *Images are a representation of the product series and therefore may not be an exact representation of the specific item
EDP |
Part Number |
DC Cutting Dia. |
OAL Overall Length |
ZEFF Eff. Teeth |
DCON Bore Dia. |
KWW Keyway |
RMPX Ramp Angle Max. |
DXF File |
STEP Light File |
STEP Detailed File |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2925706 | EJ5C-01R01 | 1.500 | 1.570 | 5 | 0.5000 | 0.250 | 1.1 | ||||
| 2925707 | EJ6C-01R01 | 1.500 | 1.570 | 4 | 0.5000 | 0.250 | 1.1 | ||||
| 2925710 | EJ5C-02R01 | 2.000 | 1.570 | 6 | 0.7500 | 0.312 | 0.8 | ||||
| 2925709 | EJ6C-02R01 | 2.000 | 1.570 | 5 | 0.7500 | 0.312 | 0.8 | ||||
| 2925712 | EJ5C-02R02 | 2.500 | 1.570 | 7 | 0.7500 | 0.312 | 0.6 | ||||
| 2925711 | EJ6C-02R02 | 2.500 | 1.570 | 6 | 0.7500 | 0.312 | 0.6 | ||||
| 2925714 | EJ5C-03R01 | 3.000 | 2.375 | 9 | 1.0000 | 0.375 | 0.5 | ||||
| 2925713 | EJ6C-03R01 | 3.000 | 2.375 | 7 | 1.0000 | 0.375 | 0.5 | ||||
| 2925717 | EJ5C-04R01 | 4.000 | 2.375 | 13 | 1.5000 | 0.625 | 0.3 | ||||
| 2925715 | EJ6C-04R01 | 4.000 | 2.375 | 9 | 1.5000 | 0.625 | 0.3 |
