Series: TQC34
Product Series Features:
- Precision Four Corner Insert
- For Parting, Grooving, & Turning
- C-Type Chipbreaker
Part Number |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
PSIRR Cutting Edge Angle Major Right Hand |
PSIRL Cutting Edge Angle Major Left Hand |
IH Insert Hand |
CUTDIA Max. Work Piece Dia. @ CDX .197" |
CUTDIA Max. Work Piece Dia. @ CDX .236" |
CUTDIA Max. Work Piece Dia. @ CDX .276" |
CUTDIA Max. Work Piece Dia. @ CDX .315" |
CUTDIA Max. Work Piece Dia. @ CDX .354" |
CUTDIA Max. Work Piece Dia. @ CDX .393" |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TQC34-1.50-0.15 | 0.059 | 0.006 | 0.354 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0020 | 0.0050 | |
| TQC34-1.50-8L | 0.059 | 0.004 | 0.354 | - | 8 | Left | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0010 | 0.0040 | |
| TQC34-1.50-8R | 0.059 | 0.004 | 0.354 | 8 | - | Right | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0010 | 0.0040 | |
| TQC34-2.00-0.20 | 0.079 | 0.008 | 0.354 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0020 | 0.0070 | |
| TQC34-2.00-1.00 | 0.079 | 0.039 | 0.354 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0020 | 0.0050 | |
| TQC34-2.00-15L | 0.079 | 0.006 | 0.354 | - | 15 | Left | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0010 | 0.0060 | |
| TQC34-2.00-15R | 0.079 | 0.006 | 0.354 | 15 | - | Right | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0010 | 0.0060 | |
| TQC34-2.00-6L | 0.079 | 0.006 | 0.354 | - | 6 | Left | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0010 | 0.0060 | |
| TQC34-2.00-6R | 0.079 | 0.006 | 0.354 | 6 | - | Right | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0010 | 0.0060 | |
| TQC34-2.30-0.20 | 0.091 | 0.008 | 0.354 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | - | 0.0020 | 0.0070 | |
| TQC34-2.39-1.20 | 0.094 | 0.047 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0050 | |
| TQC34-2.47-0.20 | 0.097 | 0.008 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0070 | |
| TQC34-2.50-0.20 | 0.098 | 0.008 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0080 | |
| TQC34-2.70-0.10 | 0.106 | 0.004 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0080 | |
| TQC34-3.00-0.20 | 0.118 | 0.008 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0100 | |
| TQC34-3.00-0.40 | 0.118 | 0.016 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0100 | |
| TQC34-3.00-1.50 | 0.118 | 0.059 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0050 | |
| TQC34-3.00-6L | 0.118 | 0.006 | 0.393 | - | 6 | Left | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0010 | 0.0070 | |
| TQC34-3.00-6R | 0.118 | 0.006 | 0.393 | 6 | - | Right | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0010 | 0.0070 | |
| TQC34-3.18-0.20 | 0.125 | 0.008 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0020 | 0.0100 | |
| TQC34-3.50-0.25 | 0.138 | 0.010 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0030 | 0.0120 | |
| TQC34-4.00-0.30 | 0.157 | 0.012 | 0.393 | - | - | Neutral | 15.78 | 7.48 | 4.92 | 3.54 | 1.57 | 0.79 | 0.0030 | 0.0120 |
Notes:
- CDX = Maximum Groove Depth
- Dependent on workpiece diameter "CUTDIA"
- Refer to chart
Chip Breakers
- 1st choice for general grooving at higher feed rates
- Stable and straight cutting edge
- For carbon steel and alloy steel
- 1st choice for soft materials at lower feed rates
- Sharp cutting edge
- For stainless, HRSA, and low carbon steel
- High positive rake angle
- Straight cutting edge
- Low cutting force
- Flat top
