Series: TQS20
Product Series Features:
- 20 mm IC - 4 Corner Insert for Grooving with Flat Cutting Edge for High Quality Surface Finish
- CDX = Maximum Groove Depth
- Dependent on workpiece diameter "CUTDIA"
- Refer to chart below
Part Number |
CW Cutting Width |
RE Corner Radius |
CDX Cutting Depth Max. |
IH Insert Hand |
CUTDIA Max. Work Piece Dia. @ CDX .138" |
CUTDIA Max. Work Piece Dia. @ CDX .157" |
CUTDIA Max. Work Piece Dia. @ CDX .177" |
CUTDIA Max. Work Piece Dia. @ CDX .197" |
FEEDGN Grooving Feed Min. |
FEEDGX Grooving Feed Max. |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| TQS20-0.50-0.05-L | 0.020 | 0.002 | 0.087 | Left | - | - | - | - | 0.0010 | 0.0030 | |
| TQS20-0.50-0.05-R | 0.020 | 0.002 | 0.087 | Right | - | - | - | - | 0.0010 | 0.0030 | |
| TQS20-1.00-0.10-L | 0.039 | 0.004 | 0.106 | Left | - | - | - | - | 0.0010 | 0.0030 | |
| TQS20-1.00-0.10-R | 0.039 | 0.004 | 0.106 | Right | - | - | - | - | 0.0010 | 0.0030 | |
| TQS20-1.50-0.10-L | 0.059 | 0.004 | 0.197 | Left | 2.75 | 1.96 | 1.18 | 0.63 | 0.0010 | 0.0040 | |
| TQS20-1.50-0.10-R | 0.059 | 0.004 | 0.197 | Right | 2.75 | 1.96 | 1.18 | 0.63 | 0.0010 | 0.0040 | |
| TQS20-2.00-0.10-L | 0.079 | 0.004 | 0.197 | Left | 2.75 | 1.96 | 1.18 | 0.63 | 0.0010 | 0.0040 | |
| TQS20-2.00-0.10-R | 0.079 | 0.004 | 0.197 | Right | 2.75 | 1.96 | 1.18 | 0.63 | 0.0010 | 0.0040 | |
| TQS20-2.00-0.20-R | 0.079 | 0.008 | 0.197 | Right | 2.75 | 1.96 | 1.18 | 0.63 | 0.0010 | 0.0040 | |
| TQS20-2.00-1.00-L | 0.079 | 0.039 | 0.197 | Left | 2.75 | 1.96 | 1.18 | 0.63 | 0.0015 | 0.0055 | |
| TQS20-2.00-1.00-R | 0.079 | 0.039 | 0.197 | Right | 2.75 | 1.96 | 1.18 | 0.63 | 0.0015 | 0.0055 | |
| TQS20-2.50-0.10-L | 0.098 | 0.004 | 0.197 | Left | 2.75 | 1.96 | 1.18 | 0.63 | 0.0020 | 0.0050 | |
| TQS20-2.50-0.10-R | 0.098 | 0.004 | 0.197 | Right | 2.75 | 1.96 | 1.18 | 0.63 | 0.0020 | 0.0050 | |
| TQS20-3.00-0.10-L | 0.118 | 0.004 | 0.197 | Left | 2.75 | 1.96 | 1.18 | 0.63 | 0.0015 | 0.0060 | |
| TQS20-3.00-0.10-R | 0.118 | 0.004 | 0.197 | Right | 2.75 | 1.96 | 1.18 | 0.63 | 0.0015 | 0.0060 | |
| TQS20-3.00-1.50-L | 0.118 | 0.059 | 0.197 | Left | 2.75 | 1.96 | 1.18 | 0.63 | 0.0015 | 0.0060 | |
| TQS20-3.00-1.50-R | 0.118 | 0.059 | 0.197 | Right | 2.75 | 1.96 | 1.18 | 0.63 | 0.0015 | 0.0060 |
PDF File
Open PDF with page(s) from Tooling Promo.
The PDF above is for this product.
For the entire 2023 Promo, Go HERE.
Flip-Book
Go to page in Tooling Promo Flip-Book.
