EDP: 3027919 Part: DJ1H160R00 Series: DJ1H - 90° Adjustable Finishing Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 2
International: 6
Product Series Features:
- Ø50 - 250 mm
- 12 mm Insert with up to 8 indexes
- 1 mm Max. Depth of Cut (0.5 mm recommended)
- Easy & accurate adjustment within 0.005 mm
- 0.12 - 0.25 Ra surface finish capability
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7019085 | 2E-831-01 | 2E-831-01 | Adjusting Wedge | n/a | n/a | n/a | ||
| 7002095 | DS-T156B1 | BLD T15/M7 | T15 Torx; 118 mm OAL; 6 mm Hex drive | n/a | n/a | n/a | ||
| 7019617 | SB060-10 | SB060-10 | Differntial Screw, M6 × 1 × 6 mm RH Thread, M6 x 1 x 6 mm LH Thread 20 mm OAL, T15 Torx Drive | n/a | n/a | n/a | ||
| 7018994 | SM35-110-R0 | SM35-110-R0 | Screw, M3.5 × 0.6 × 11 mm, T15 Torx drive | Torque: 25-30 in lb | n/a | n/a | n/a | |
| 7019679 | DS-A00T | DS-A00T | Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot | n/a | n/a | n/a |
