EDP: 3222808 - Part Number: DRXL0635127R6R01 - Series: DRXL 20xD Solid Carbide Drill (Inch Shk)

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	PMTS (Precision Machining Technology Show)	April 1–3, 2025	Huntington Convention Center, Cleveland, OH	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- info@ingersoll-imc.com

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > Drill-In XL > DRXL 20xD Solid Carbide Drill (Inch Shk) > 3222808 DRXL0635127R6R01

EDP: 3222808
Part: DRXL0635127R6R01
Series: DRXL 20xD Solid Carbide Drill (Inch Shk)

Coolant-Thru

Drilling

DC Cutting Dia.

0.2500 (6.35 mm)

PL Point Length

1.16 mm

LU Usable Length

5.000

LCF Chip Flute Length

5.900

LS Shank Length

50.00 mm

OAL Overall Length

7.870

DCON Shank Dia.

0.250

SIG Point Angle

140

CSP Coolant

Yes

ZEFF Eff. Teeth

2

ULDR Usable Length Dia. Ratio

20×

Available : 0
International: 4

Product Series Features:

Ø.2500-.3750"
Cylindrical Shank (Inch)
Unique geometry with high performance

Coolant-Thru

Drilling

DC - Cutting Dia.	0.2500 (6.35 mm)
PL - Point Length	1.16 mm
LU - Usable Length	5.000
LCF - Chip Flute Length	5.900
LS - Shank Length	50.00 mm
OAL - Overall Length	7.870
DCON - Shank Dia.	0.250
SIG - Point Angle	140
CSP - Coolant	Yes
ZEFF - Eff. Teeth	2
ULDR - Usable Length Dia. Ratio	20×

Photo of HydroMax

HydroMax
CAT*HYDRO

CAT V-Flange
Hydraulic Milling Chuck
CAT40 Balanced G2.5@18,000 RPM
CAT50 Balanced G2.5@12,000 RPM
Runout Accuracy <.00012"
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Collet
Single Diameter
8 Slot Rubber Sealed Design
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with coolant through cutting tools

Photo of Tool Holders

Tool Holders
ER*SRK

ER Series Integral Collet
Thermal Shrink Adaption
1450 Max PSI
For use with Carbide Shank Tooling only
For through coolant, preset screw must be removed
*See Notes below

Photo of HydroMax

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck
HSKA50-A63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of Tool Holders

Tool Holders
SC*SEAL

Sealed Power Milling Chuck Sleeve
1450 Max PSI
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

Drill In XL Line

Operating Guidelines