Home > Tool Holders > ER*SPR > 4540013 ER16SPR.199-.238

Trade Logo  EDP: 4540013  Part: ER16SPR.199-.238  Series: ER*SPR

Available : 16
International: 227

Product Series Features:

  • ER Series DIN 6499 /ISO15488-B Spring Collet
  • Inch/Metric Combination
  • .0004" TIR
  • Hard Touch Coated
  • NOTE: ER11 COLLETS SHOWN WITH .039" (1 mm) CLAMPING RANGE HAVE BEEN PHASED OUT AND REPLACED WITH .020" (0.5 mm) CLAMPING RANGE
Notes:
  • Hard Touch coating increases wear resistance, improves corrosion protection, prolongs the surface finish quality, and maintains longer runout accuracy.

Pro-Rounds
45BRB - Ball Nose End Mill

  • Ø.10-4 mm
  • Cylindrical Shank (Metric)
  • 2 Flute, 30° Helix
  • Rib processing for materials up to 65 HRc

Feed-Rounds
45DRA - Hi-Feed End Mill

  • Ø6-12 mm
  • Cylindrical Shank (Metric)
  • 2 or 4 Flute, 0° Helix
  • Excellent for high productivity
  • For cast iron, alloy and hardened steel up to 65HRc, stainless steel, titanium and nickel based alloys

Power-Rounds
45DRB - 90° End Mill (Metric)

  • Ø0.5 -12 mm
  • 2 Flute, 30° Helix with corner radius
  • For rib processing on hard materials up to 65 HRc
  • Hard submicron cemented carbide substrate for improved deformation resistance
  • Bright blue hard PVD coating for improved oxidation, chipping, wear resistance, and wear detection

Power-Rounds
45NRA - 90° End Mill

  • Ø3-12 mm
  • Cylindrical Shank (Metric)
  • 2 Flute, 45° Helix
  • 90° point, chamfering, countersink, spot drill

Power-Rounds
45SRB - 90° End Mill 120° Point

  • Ø4-20 mm
  • Cylindrical Shank (Metric)
  • 2 Flute, 30° Helix
  • Multi-function
  • Aluminum applications

Power-Rounds
45SRB - 90° End Mill 90° Point

  • Ø4-20 mm
  • Cylindrical Shank (Metric)
  • 2 Flute, 30° Helix
  • Multi-function
  • Aluminum applications

Pro-Rounds
46BRH - Ball Nose End Mill

  • Ø2-12 mm
  • Cylindrical Shank
  • 3 Flute, 40° Helix
  • Aluminum applications

Stedi-Rounds
46DRQ - 90° End Mill

  • Ø1.5-25 mm
  • Cylindrical Shank (Metric)
  • 3 Flute, 39-41° Helix
  • Variable helix
  • Aluminum applications
  • Center Cutting

Hyper-Rounds
46JRW - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 3 Flute, 50° Helix
  • Variable pitch, variable helix
  • Sharp corner
  • Aluminum applications

Hyper-Rounds
46JRW - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 3 Flute, 50° Helix
  • Variable pitch, variable helix
  • Aluminum applications, wave-cut

Feed-Rounds
47ARA - Hi-Feed End Mill

  • Ø1-20 mm
  • Cylindrical Shank (Metric)
  • 2 or 4 Flute, 0° Helix

Pro-Rounds
47BRQ - Ball Nose End Mill

  • Ø.125-.500"
  • Cylindrical Shank (Metric)
  • 4 Flute, 38° Helix
  • Variable pitch for chatter dampening
  • Full slot milling, up to 2xD
  • Relieved necks at 3xD

Power-Rounds
47C/48CRN - 90° End Mill

  • Ø6-14 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 45° Helix
  • Corner chamfer
  • Roughing applications

Power-Rounds
47CRM - 90° End Mill

  • Ø5-20 mm
  • Cylindrical and Weldon Shank (Metric)
  • 4 Flute, 38° Helix
  • Corner chamfer
  • Roughing applications

Stedi-Rounds
47CRQ - 90° End Mill

  • Ø1-20 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 38° Helix
  • Variable pitch
  • Corners: sharp and chamfer
  • Grade: IN2005

Stedi-Rounds
47CRQ - 90° End Mill

  • Ø3-20 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 38° Helix
  • Variable pitch

Hyper-Rounds
47CRQ - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 35-37° Helix
  • Variable pitch, variable helix
  • ECO style, short

Hyper-Rounds
47CRQ - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 35°-37° Helix
  • Variable Pitch, Variable Helix
  • ECO, Short

Hyper-Rounds
47CRQ - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 35-37° Helix
  • Variable pitch, variable helix

RoughFin-Rounds
47CRU - 90° End Mill

  • Ø6-25 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 45° Helix

Power-Rounds
47D_RB 90° End Mill (Metric)

  • Ø3-12 mm (Cylindrical)
  • 4 Flute, 30° Helix
  • Corner radius
  • General purpose applications

3n1-Rounds
47DRP - Hi-Feed End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 4 or 5 flutes, 38° Helix, large corner radii
  • Chatter-free combo high-feed variable pitch chipsplitter
  • Serrated cutting edge features flat peaks which leave a better surface finish when compared to competitors' roughing end mills
  • Provides the greatest advantage in cavity milling and heavy roughing cuts

Stedi-Rounds
47DRQ - 90° End Mill

  • Ø6-25 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 39-41° Helix
  • Variable Pitch, Variable Helix
  • Aluminum Applications

Hyper-Rounds
47DRQ - 90° End Mill

  • Ø6-25 mm
  • Cylindrical Shank (Metric)
  • 4 Flute, 35°-37° Helix
  • Variable Pitch, Variable Helix

Hyper-Rounds
47DRQ - 90° End Mill

  • Ø4-12 mm
  • Cylindrical Shank (Metric)
  • 5 Flute, 36-38° Helix
  • Variable Pitch, Variable Helix

Tek-Rounds
47DRX - 90° End Mill

  • Ø4-20 mm
  • Cylindrical & Weldon (Metric)
  • 4 Flute, 35-37° Helix
  • Variable Helix, Variable Pitch
  • Radial Relief Grind

Hyper-Rounds
48C/49CRQ - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 6 to 20 Flute, 45° Helix
  • Variable Pitch, Variable Helix

Power-Rounds
48J_RJ - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 6 Flute, 50° Helix
  • Sharp corner
  • General purpose applications

Power-Rounds
48JRD - 90° End Mill

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 3 Flute, 45° Helix
  • Sharp corner
  • General purpose application

Power-Rounds
48JRJ - 90° End Mill - Extra Long

  • Ø6-20 mm
  • Cylindrical Shank (Metric)
  • 6 Flutes, 45° Helix
  • Corner radius
  • Finishing hard materials up to 65 HRC

Hyper-Rounds
48JRQ - 90° End Mill

  • Ø2-20 mm
  • Cylindrical Shank (Metric)
  • 7 Flute, 37-38° Helix
  • Variable pitch, variable helix

Tek-Rounds
48ZRE - 90° End Mill

  • Ø6-12 mm
  • Cylindrical Shank (Metric)
  • 6 & 8 Flutes, 30° Helix
  • Right and left-hand helix flutes, changing direction at mid cutting heights
  • Carbon Fiber Reinforced Polymer Parts

Tek-Rounds
49JRL - 90° End Mill

  • Ø6-12 mm
  • Cylindrical Shank (Metric)
  • 6 & 8 Flutes, 30° Helix
  • CFRP parts

Drill-In
DJ - 3xD Solid Carbide Drill, 2-Flute

  • Ø3-12 mm
  • Cylindrical Shank (Metric)
  • 140° Included Point
  • 30° Axial Rake

Drill-In
DJ - 5xD Solid Carbide Drill, 2-Flute

  • Ø3-12 mm
  • Cylindrical Shank (Metric)
  • 140° Included Point
  • 30° Axial Rake

Drill-In
HB00 - Pre-Thread Drill Chamfering Combo

  • Cylindrical Shank (Metric)
  • Combine Tap Drilling & Chamfering in One Operation

Rapid-Thread
MTEC-ISO - Solid Carbide Thread Mill

  • Cylindrical Shank
  • Internal thread mills for ISO thread form

Rapid-Thread
MTECSH-ISO - Solid Carbide Thread Mill

  • Cylindrical Shank
  • Small Diameter
  • Left-Hand Cut
  • ISO Profile for Hardened Steel

Rapid-Thread
MTECS-ISO - Solid Carbide Thread Mill

  • Cylindrical Shank
  • Small Diameter, Short
  • ISO Profile
  • 2×D and 3×D

Tool Holders
BT*ER

  • BT MAS-403
  • ER Collet Chuck DIN6499
  • AD Style Coolant (coolant through the center)
  • Balanced G6.3@12,000RPM
  • (Note: Some BT40 holders under 100 mm GL are balanced G2.5@20,000 RPM)

Tool Holders
BT*FC*ER

  • BT MAS-403 Face Contact
  • ER Collet Chuck DIN 6499
  • ADB Convertible through the center or through the flange coolant delivery
  • BT40 balanced G2.5@20,000RPM
  • BT50 balanced G2.5@15,000RPM

Tool Holders
C*ER

  • C-Adapter (ISO 26623-1)
  • ER Collet Chuck DIN 6499
  • Quick Change Holder

Tool Holders
C*ER*M

  • C-Adapter (ISO 26623-1)
  • ER Long Mini Nut Style Collet Chuck
  • Per DIN 6499
  • Quick Change Holder

Tool Holders
CAT*ER

  • CAT V-Flange
  • ER Collet Chuck DIN 6499
  • AD Style Coolant (coolant through the center)
  • CAT30 / CAT40 balanced G2.5@20,000RPM
  • CAT50 balanced G2.5@12,000RPM

Tool Holders
CAT*FC*ER

  • CAT Face Contact
  • ER Collet Chuck DIN 6499
  • AD Style Coolant (coolant through the center)
  • AD Style Coolant (through the center)
  • CAT40 balanced G2.5@20,000RPM
  • CAT50 balanced G2.5@15,000RPM

Top-On
CDPER*M

  • TopOn Threaded Adaption Adapter
  • ER Collet Chuck DIN 6499
  • Interchangeable with inch and metric shanks
  • Coolant through center

Tool Holders
HSKA*ER

  • HSK-A (DIN 69893/A)
  • ER Collet Chuck DIN6499
  • HSK A40-A63 balanced G2.5@20,000RPM
  • HSK A100 balanced G6.3@12,000RPM

Tool Holders
HSKA*ER*M

  • HSK-A (DIN 69893/A)
  • ER Mini Collet Chuck DIN6499
  • HSK A50-A63 Balanced G2.5@20,000RPM
  • HSK A100 balanced G6.3@12,000RPM

Tool Holders
HSKE*ER

  • HSK-E (DIN 69893/E)
  • ER Collet Chuck DIN 6499
  • Balanced G2.5@25,000RPM

Tool Holders
R8*ER

  • R8 Bridgeport Shank
  • ER Collet Chuck DIN 6499

Tool Holders
ST*ER

  • Cylindrical Shank
  • ER Collet Chuck DIN 6499
  • Central Coolant Hole

Tool Holders
ST*ER*M

  • Cylindrical Shank
  • ER Collet Chuck DIN 6499
  • Central Coolant Hole

Tool Holders
ST*ER*MF

  • Cylindrical Flatted Shank
  • ER Collet Chuck DIN 6499 with Mini Nut
  • For Use on Swiss Type CNC Lathe
  • Central Coolant Hole

Tool Holders
ST*ER*MFD

  • Cylindrical Flatted Shank
  • ER Collet Chuck DIN 6499 Double Ended with Mini Nut
  • Central Coolant Hole

Tool Holders
ST*ER*S

  • Cylindrical Shank
  • ER Collet Chuck DIN 6499 with 1/4" NPT inlet
  • Central coolant hole
Find us on Facebook
View us on Youtube