Home > DAndrea-Modulhard > BR > 4541224 BR16/16.100

Trade Logo  EDP: 4541224  Part: BR16/16.100  Series: BR

Available : 0

Product Series Features:

  • Cylindrical or Flatted Shank
  • D’Andrea MHD Connection

Tool Holders
BT*FC*HYDRO (Metric)

  • BT MAS-403 Face Contact
  • METRIC Hydraulic Milling Chuck
  • High runout accuracy of < 0.003 mm
  • For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
  • Balanced G2.5@18,000 RPM
  • Chucking forces will be reduced by 25% when using sleeves
  • *See Notes below

Tool Holders
BT*HYDRO (Metric)

  • BT MAS-403
  • METRIC Hydraulic Milling Chuck
  • High runout accuracy of < 0.003 mm
  • For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
  • BT30/BT40 balanced G6.3@18,000 RPM
  • BT50 balanced G6.3@12,000 RPM
  • Chucking forces will be reduced by 25% when using sleeves
  • *See Notes below

Tool Holders
BT*HYDRO*HD (Metric)

  • BT MAS-403
  • METRIC Heavy Duty Hydraulic Milling Chuck
  • High runout accuracy of < 0.003 mm
  • For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
  • Balanced G2.5@25,000 RPM
  • Chucking forces will be reduced by 25% when reduction sleeves are used
  • *See Notes below

Tool Holders
DIN69871*HYDRO (Metric)

  • DIN69871 V-Flange
  • METRIC Hydraulic Milling Chuck
  • High runout accuracy of < 0.003 mm
  • For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
  • DIN69871-40 balanced G2.5@18,000 RPM
  • DIN69871-50 balanced G2.5@12,000 RPM
  • Chucking forces will be reduced by 25% when using sleeves
  • *See Notes below

Tool Holders
DIN69871*HYDRO*HD (Metric)

  • DIN69871 / SK V-Flange
  • METRIC Heavy Duty Hydraulic Milling Chuck
  • High runout accuracy of < 0.003 mm
  • For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
  • Balanced G2.5@25,000 RPM
  • Chucking forces will be reduced by 25% when using sleeves
  • *See Notes below

Tool Holders
ER*SEAL*AA JET

  • DIN 6499/ISO 15488-B Collet
  • Single Diameter (Metric)
  • 8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
  • AA High Precision
  • 0.005 mm TIR
  • Collapse Range 0.2 mm Max
  • Super Finish Surface with Anti-Corrosion protection
  • 100 Bar Max
  • For use with solid shank cutting tools
  • Recommended for improved runout & clamping torque

Tool Holders
ER*SPR

  • ER Series DIN 6499 /ISO15488-B Spring Collet
  • Inch/Metric Combination
  • .0004" TIR
  • Hard Touch Coated
  • NOTE: ER11 COLLETS SHOWN WITH .039" (1 mm) CLAMPING RANGE HAVE BEEN PHASED OUT AND REPLACED WITH .020" (0.5 mm) CLAMPING RANGE

Tool Holders
ER*SPR*AA

  • ER Series DIN 6499 Spring Collet
  • Inch/Metric Combination
  • AA High Precision
  • .0002" TIR
  • Hard Touch coated

Tool Holders
HSKA*HYDRO (Metric)

  • HSK-A (DIN 69893/A)
  • Hydraulic Milling Chuck (Metric)
  • HSKA63 balanced G2.5@24,000RPM
  • HSKA80 balanced G2.5@16,000RPM
  • HSKA100 balanced G2.5@15,000RPM
  • Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
  • *See additional notes below

Tool Holders
SC*HYDRO

  • Sealed Reduction Sleeve (Metric)
  • For use in hydraulic milling chucks
  • NOTE: Product Series is being obsoleted and replaced with SC*HYDRO*HD
  • Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Tool Holders
SC*HYDRO*HP

  • Sealed Reduction Sleeve (Metric)
  • For use in hydraulic milling chucks
  • Runout Accuracy <0.003 mm
  • Max Coolant Pressure 85 Bar
  • Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Tool Holders
SC*SPR

  • Straight Sleeve/Collet (Metric)
  • For use with MAXIN Power Milling Chucks
  • Preset Screw available for tool positioning (Sold Separately)
  • *Chucking forces will be reduced by 25% when optional reduction sleeves are used

Tool Holders
SC*SPR INCH/METRIC

  • Straight Sleeve/Collet (Inch OD to Metric ID)
  • For use with Power Milling Chucks
  • Chucking forces will be reduced by 25% when optional reduction sleeves are used
Find us on Facebook
View us on Youtube