EDP: 9590283 - Part Number: RE1-.500.625.625Z7125C25 - Series: RE1_7

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	ISA26 (Industrial Supply Association)	April 21–22, 2026	Huntington Convention Center, Cleveland, OH	Show Website
2	IMTS2026 (International Manufacturing Technology Show)	September 14 thru 19, 2026	McCormick Place, Chicago, IL	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- [email protected]

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > RhinoRounds > RE1_7 - 90° End Mill > 9590283 RE1-.500.625.625Z7125C25

EDP: 9590283
Part: RE1-.500.625.625Z7125C25
Series: RE1_7 - 90° End Mill

DC Cutting Dia.

0.5000

RE/CHW Corner Radius/Chamfer

0.125 R

APMX Depth of Cut Max.

0.625

LUX Usable Length Max.

0.625

OAL Overall Length

2.50

FHA Flute Helix Angle

40

KAPR Cutting Edge Angle

90

DCON Shank Dia.

0.500

CSP Coolant

No

RMPX Ramp Angle Max.

1.5

ZEFF Eff. Teeth

7

Available : 6
International: 95

Product Series Features:

Ø.250-1.2500"
Cylindrical Shank
7 Flute, 40° Helix
Variable Pitch
Corners: Sharp, .015" .030" .060" .090" .125" R

DC - Cutting Dia.	0.5000
RE/CHW - Corner Radius/Chamfer	0.125 R
APMX - Depth of Cut Max.	0.625
LUX - Usable Length Max.	0.625
OAL - Overall Length	2.50
FHA - Flute Helix Angle	40
KAPR - Cutting Edge Angle	90
DCON - Shank Dia.	0.500
CSP - Coolant	No
RMPX - Ramp Angle Max.	1.5
ZEFF - Eff. Teeth	7

HydroMax
C*HYDRO*HD

C-Adapter (ISO 26623-1)
Heavy Duty Hydraulic Milling Chuck
Quick Change Holder
Runout Accuracy <.00012"
High Torque Transmission
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
Balanced G2.5@25,000 RPM
*See Notes below

HydroMax
CAT*HYDRO

CAT V-Flange
Hydraulic Milling Chuck
CAT40 Balanced G2.5@18,000 RPM
CAT50 Balanced G2.5@12,000 RPM
Runout Accuracy <.00012"
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Tool Holders
CAT*SRK

CAT V-Flange
Thermal Shrink Chuck
AD Style Coolant (coolant through the center)
Balanced G2.5@25,000RPM

Tool Holders
ER*EX

ER Series DIN6499 Spring Collet
Single Diameter
.0004" Runout Tolerance
Super Finish Surface with Anti-Corrosion Protection
Recommended for improved runout & clamping torque
For use with solid shank cutting tools

Tool Holders
ER*SEAL*AA JET

DIN 6499/ISO 15488-B Collet
Single Diameter
8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with solid shank cutting tools
Recommended for improved runout & clamping torque

Tool Holders
ER*SPR

ER Series DIN 6499 /ISO15488-B Spring Collet
Inch/Metric Combination
.0004" TIR
Hard Touch Coated
NOTE: ER11 COLLETS SHOWN WITH .039" (1 mm) CLAMPING RANGE HAVE BEEN PHASED OUT AND REPLACED WITH .020" (0.5 mm) CLAMPING RANGE

Tool Holders
ER*SPR*AA

ER Series DIN 6499 Spring Collet
Inch/Metric Combination
AA High Precision
.0002" TIR
Hard Touch coated

Tool Holders
ER*SRK

ER Series Integral Collet
Thermal Shrink Adaption
1450 Max PSI
For use with Carbide Shank Tooling only
For through coolant, preset screw must be removed
*See Notes below

Tool Holders
ER*SRK*CX

ER Series Integral Collet with Coolant Jet Channels
Thermal Shrink Adaption
Slim Nose Design with Coolant channels along shank bore
1450 Max PSI
For use with solid carbide shank (non-coolant through) tooling only
Note: Preset CX Screw enables coolant supply via coolant channels - Do Not Remove
*See Notes Below

Tool Holders
ER*SRK*JET2

ER Series Integral Collet with Internal Cooling Jets
Thermal Shrink Adaption
1450 Max PSI
For use with standard carbide shank (non-coolant through) tooling
*Note: When assembled in an ER holder, the actual protruding length of the becomes shorter by 2.0 mm for ER20 and 3.0 mm for ER25 and ER32

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck
HSKA50-A63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

HydroMax
SC*HYDRO

Sealed Reduction Sleeve
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Tool Holders
SC*SPR

Straight Sleeve/Collet
For use with MAXIN Power Milling chucks
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

New-351-1 RhinoRounds 5-6-7-Flute

Operating Guidelines 7-Flute RhinoRounds

Milling

Holemaking

ISO Turning
Grade &
Chipbreaker

Turning
Grades

Turning
Chipbreakers

Turning Inserts

Turning Holders & Boring Bars

Turning Holders & Boring Bars

Machining
App

RapidThread
Advisor

Product Lines

Industries

QwikMod

Big Cutter One - Next Stop

Big Cutter Two - Next Stop

In-Person
Seminars

Mobile
Seminars

Tech
Support

Customer
Service

EDP: 9590283
Part: RE1-.500.625.625Z7125C25
Series: RE1_7 - 90° End Mill

Product Series Features:

Milling

Holemaking

ISO TurningGrade &Chipbreaker

TurningGrades

TurningChipbreakers

Turning Inserts

Turning Holders & Boring Bars

Turning Holders & Boring Bars

MachiningApp

RapidThreadAdvisor

Catalogs

Ingersoll TV

Product Lines

Industries

QwikMod

Our Most Recent QwikCuts

Big Cutter One - Next Stop

Big Cutter Two - Next Stop

In-PersonSeminars

MobileSeminars

Our Upcoming Trade Shows

Address:

Phone or E-Mail:

TechSupport

CustomerService

EDP: 9590283 Part: RE1-.500.625.625Z7125C25 Series: RE1_7 - 90° End Mill

Product Series Features:

ISO Turning
Grade &
Chipbreaker

Turning
Grades

Turning
Chipbreakers

Machining
App

RapidThread
Advisor

In-Person
Seminars

Mobile
Seminars

Tech
Support

Customer
Service

EDP: 9590283
Part: RE1-.500.625.625Z7125C25
Series: RE1_7 - 90° End Mill