EDP: 2927981 Part: 49D-1086TURB03 IN2005 Series: 49D & 49J - 90° End Mill Tip
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 52
International: 17
Product Series Features:
- Ø.625-1.000"
- Chip Surfer Connection
- 8, & 10 Flute, 30 or 45° Helix
- .7xD Flute Length
- Non-Center Cutting
- Corner: Sharp, .015", .031", .062", .125"R
Notes:
- When assembling, be sure tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 4305309 | WS-0061 | WS-0061 | 20mm wrench head opening for use with T15 Chip Surfer tooling | Optional Accessory Item; Sold separately | n/a | n/a | ||
| 2925154 | DT-350-20 | DT-350-20 | Torque Wrench for T15 Chip Surfer Heads 20 mm Opening Pre-Set to 350 in lbs | Optional Accessory Item; Sold separately | n/a | n/a | n/a |
