Home > Tool Holders > ST*ER*S > 4500199 ST1X3.000ER32S

Trade Logo  EDP: 4500199  Part: ST1X3.000ER32S  Series: ST*ER*S

Available : 12
International: 39

Product Series Features:

  • Cylindrical Shank
  • ER Collet Chuck DIN 6499 with 1/4" NPT inlet
  • Central coolant hole

Tool Holders
BT*SRKIN

  • BT MAS-403
  • INCH Thermal Shrink Chuck
  • AD Style Coolant (coolant through the center)
  • For use with Inductive Heating devices ONLY
  • -C Indicates coolant ports in nose
  • BT40 balanced G2.5@25,000RPM

Tool Holders
C*SRKIN

  • C-Adapter (ISO 26623-1)
  • INCH Thermal Shrink Chuck
  • Quick Change Holder
  • For use with h6 carbide, steel, or HSS shank tooling
  • For use with Induction style heating units only

Tool Holders
CAT*FC*SRKIN

  • CAT Face Contact
  • Thermal Shrink Chuck
  • AD Style Coolant (coolant through the center)
  • For use with Carbide, HSS, and Steel tools with h6 tolerance
  • Balanced G2.5@25,000RPM
  • For use with Inductive Heating devices only

Tool Holders
CAT*HYDRO

  • CAT V-Flange
  • Hydraulic Milling Chuck
  • CAT40 Balanced G2.5@18,000 RPM
  • CAT50 Balanced G2.5@12,000 RPM
  • Runout Accuracy <.00012"
  • Recommended for chatter dampening when machining high temperature alloys such as titanium
  • Chucking forces will be reduced by 25% when using sleeves
  • *See Notes below

Tool Holders
CAT*SRKIN

  • CAT V-Flange
  • Thermal Shrink Chuck
  • ADB Style Coolant (convertible coolant through the center & flange)
  • For use with Inductive Heating device ONLY
  • Balanced G2.5@25,000RPM

Tool Holders
ER*EX

  • ER Series DIN6499 Spring Collet
  • Single Diameter
  • .0004" Runout Tolerance
  • Super Finish Surface with Anti-Corrosion Protection
  • Recommended for improved runout & clamping torque
  • For use with solid shank cutting tools

Tool Holders
ER*SEAL*AA JET

  • DIN 6499/ISO 15488-B Collet
  • Single Diameter
  • 8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
  • AA High Precision
  • .0002" TIR
  • Collapse Range 0.008" Max
  • Super Finish Surface with Anti-Corrosion protection
  • 1450 PSI Max
  • For use with solid shank cutting tools
  • Recommended for improved runout & clamping torque

Tool Holders
ER*SPR

  • ER Series DIN 6499 /ISO15488-B Spring Collet
  • Inch/Metric Combination
  • .0004" TIR
  • Hard Touch Coated
  • NOTE: ER11 COLLETS SHOWN WITH .039" (1 mm) CLAMPING RANGE HAVE BEEN PHASED OUT AND REPLACED WITH .020" (0.5 mm) CLAMPING RANGE

Tool Holders
ER*SPR*AA

  • ER Series DIN 6499 Spring Collet
  • Inch/Metric Combination
  • AA High Precision
  • .0002" TIR
  • Hard Touch coated

Tool Holders
HSKA*HYDRO

  • HSK-A (DIN 69893/A)
  • Hydraulic Milling Chuck
  • HSKA50-A63 balanced G2.5@25,000RPM
  • HSKA100 balanced G2.5@18,000RPM
  • Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
  • *See additional notes below

Tool Holders
HSKA*SRKIN

  • HSK-A (DIN 69893/A)
  • INCH Thermal Shrink Chuck
  • For use with carbide, HSS, and steel shank tooling
  • HSKA63 balanced G2.5@25,000RPM
  • HSKA100 balanced G2.5@20,000 RPM

Tool Holders
HSKFM*SRKIN

  • HSK-FM (DIN 69893/F)
  • INCH Thermal Shrink Chuck with removeable Drive Pins for use on Makino models MAG Series A
  • HSK FM balanced G2.5@33,000RPM
  • For use with caribide, HSS, & steel tools with h6 shank tolerance
  • Note: Compatible with inductive heating devices only

Tool Holders
SC*HYDRO

  • Sealed Reduction Sleeve
  • For use in hydraulic milling chucks
  • Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Tool Holders
SC*SPR

  • Straight Sleeve/Collet
  • For use with MAXIN Power Milling chucks
  • Preset Screw available for tool positioning (Sold Separately)
  • *Chucking forces will be reduced by 25% when optional reduction sleeves are used
Find us on Facebook
View us on Youtube