EDP: 4505876 - Part Number: BT50SEM1X2.375 - Series: BT*SEM

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	ISA26 (Industrial Supply Association)	April 21–22, 2026	Huntington Convention Center, Cleveland, OH	Show Website
2	IMTS2026 (International Manufacturing Technology Show)	September 14 thru 19, 2026	McCormick Place, Chicago, IL	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- [email protected]

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > Tool Holders > BT*SEM > 4505876 BT50SEM1X2.375

EDP: 4505876
Part: BT50SEM1X2.375
Series: BT*SEM

View STEP

CCMS Connection Code Machine Side

BT50

DCON Pilot Dia.

1.000

LF Functional Length

2.375

LB Body Length

0.878

BD Body Dia.

2.165

LSC Clamping Length

0.669

CNSC Coolant Entry Style Code

7

CXSC Coolant Exit Style Code

1

DCP Data Chip Provision

No

Available : 0
International: 18

Product Series Features:

BT MAS-403
Shell Mill Holder ISO 3937

Notes:

*Images are a representation of the product series as a whole and therefore may not be an exact representation of a specific item

CCMS - Connection Code Machine Side	BT50
DCON - Pilot Dia.	1.000
LF - Functional Length	2.375
LB - Body Length	0.878
BD - Body Dia.	2.165
LSC - Clamping Length	0.669
CNSC - Coolant Entry Style Code	7
CXSC - Coolant Exit Style Code	1
DCP - Data Chip Provision	No
DXF File
STEP Light File
STEP Detailed File

Photo of HiPos-Plus

HiPos-Plus
22J3E - 90° Fluted Precision Finishing Shell Mill

Ø2.500" - 4.000"
All Eff. / RH Helix
16 mm Insert with 4 indexes
Insert corner: .015", .031", .062", .093", .125" R

Photo of HiPos-Plus

HiPos-Plus
22J3X - 90° Shell Mill

Ø2.000-2.500"
12 mm Insert with 2 indexes
All Eff. / RH Helix
Inch corners: .015", .031", .062", .093", .125" R
Metric corners: 3 mm, 4 mm R

Photo of HiPos-Plus

HiPos-Plus
22N3X - Chamfer Shell Mill

Ø1.375" Min. (Shell Mill)
45° Cutting Edge Angle
12 mm Insert with 2 indexes
All Eff. / RH Helix

Photo of HiPos-Plus

HiPos-Plus
25J3H - 90° Extended Flute Shell Mill

Ø2.500 - 4.000"
All Eff / RH Helix
18, 12 mm Insert
4 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

Photo of HiPos-Plus

HiPos-Plus
25J3J - 90° Fluted Shell Mill

Ø2.500-4.00" (Shell Mill)
All Eff / RH Helix
14 mm Insert
2 indexes
Produces smooth blend between stations (visible line but no step on side wall)
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert Corner: .015", .031", .062" & .093" R

Photo of HiPos

HiPos
2J1B - 90° Face Mill

Ø2.00-8.00"
.60" Depth of cut
16 mm Insert with 2 indexes
Insert corners: .015", .031", .062", .093", .125" R

Photo of HiPos-Plus

HiPos-Plus
2J1F (11 mm Insert)

90° Face Mill
.43" Max. depth of cut
11 mm Insert with 2 indexes
Insert Corner: .015" .031" .062" .125"R. Cutter body must be relieved to accept .125"R insert.

Photo of HiPos

HiPos
2J1Q (12 mm Insert)

90° Face Mill
.47" Max. depth of cut
Insert with 2 indexes
Insert Corner: .015", .031", .062", .093", .125" and .250"R

Photo of HiPos

HiPos
2J4B - 90° Face Mill (Large Corner)

Ø2.00-4.00"
.60" Depth of cut
16 mm Insert with 2 indexes
Insert corners: .187", .250" R

Photo of HiPos-Plus

HiPos-Plus
2J4E - 90° Face Mill (Large Corner)

Ø2.00-4.00"
.63" Depth of cut
18 mm Insert with 2 indexes
Insert corners: .187", .250" R

Photo of HiPos-Plus

HiPos-Plus
2L1X (12 mm Insert)

75° Face Mill
.21" Max. depth of cut
12 mm Insert with 2 indexes
Uses opposing unused edges of AOMT12 insert

Photo of FormMaster Shear

FormMaster Shear
35B6E - Radial Drive Slotter

Ø2.500-3.000"
8 mm (.315") Cutting Width
8 mm IC Button insert
Reliable performance, strength & economy!

Photo of FormMaster Shear

FormMaster Shear
35B6G - Radial Drive Slotter

Ø2.500-3.000"
10 mm (.394") Cutting Width
10 mm IC Button Insert with 8 indexes
Insert anti-rotation
Reliable performance, strength & economy!

Photo of FormMaster Shear

FormMaster Shear
35B6H - Radial Drive Slotter

Ø3.250-5.000"
12 mm (.472") Cutting Width
12 mm IC Button Insert with 8 indexes
Insert anti-rotation
Reliable performance, strength!

Photo of HiPos-Quad

HiPos-Quad
35J6E - Medium-Duty Slotters (Radial Drive)

Ø4.000-8.000"
Radial Drive
.375" and .500" Width of Cut
8 mm IC Square Insert with 8 indexes
Insert anti-rotation
Insert Corners: .020", .031" R
Reliable performance, strength!

Photo of SlotMax

SlotMax
38L5 Radial Drive

Medium-Duty Slotters
.156" to .312" Cutting Width
Inserts with 4 Indexes
** Note, OBSOLETE product line.
Refer to the following stocked alternative:
Gold Slot, series 3VJ4V

Photo of GoldMax 4

GoldMax 4
3EJ6F - Radial Drive Slotter

Ø4.000-10.000"
.625" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Photo of GoldMax 4

GoldMax 4
3EJ6J - Radial Drive Slotter

Ø4.000-12.000"
0.750" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Photo of GoldMax 4

GoldMax 4
3EJ6M - Radial Drive Slotter

Ø4.000-10.000"
1.000" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Photo of

3SJ6 Radial Drive

Heavy-Duty Radial Drive Slotter
.625-1.000" Cutting widths
Insert corners: .031", .062", .094", .125" R (2RH/2LH)
Inserts with 4 Indexes

Photo of GoldSlot

GoldSlot
3VJ4V - Radial Drive Slotter

Ø2.500-4.000"
0.125" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Photo of GoldSlot

GoldSlot
3VJ4V - Radial Drive Slotter

Ø2.500-6.000"
0.156" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Photo of GoldSlot

GoldSlot
3VJ4V - Radial Drive Slotter

Ø2.500- 6.000"
0.187" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Photo of GoldSlot

GoldSlot
3VJ4V - Radial Drive Slotter

Ø2.500-6.000"
0.250" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Photo of GoldSlot

GoldSlot
3VJ4V - Radial Drive Slotter

Ø4.000-8.000"
0.312" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Photo of GoldSlot

GoldSlot
3VJ4V - Radial Drive Slotter

Ø4.000 -8.000"
0.375" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Photo of GoldSlot

GoldSlot
3VJ4V - Radial Drive Slotter

Ø4.000-8.000"
0.500" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Photo of Thin-Max

Thin-Max
3VJ5V Radial Drive

Medium-Duty Slotters
.125" to .375" Cutting width
Inserts with 4 indexes
**Note: OBSOLETE PRODUCT

Photo of Aluminator

Aluminator
5H6G - 90° Rough & Finish Face Mill

Ø2.000-6.000"
11 mm Insert with 4 indexes
.41" Depth of Cut
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008", .020", .031", .062", .093", .125" R

Photo of HiPos-Quad

HiPos-Quad
5J1E - 90° Face Mill

Ø1.50-3.00"
.31" Depth of cut
8 mm Insert with 4 indexes
Insert corners: .020", .031", .062" R

Photo of Iron-Eater

Iron-Eater
5J2H - 45° SiNi Face Mill

Ø3.00-4.00"
Quad depth of cut: .24"
Octo depth of cut: .15"
Wedge held inserts
Pre-balanced

Photo of HiPos-Quad

HiPos-Quad
5J2H - 90° Face Mill

Ø2.00"-4.00"
.40" Depth of cut
13 mm Insert with 4 indexes
Insert corner: .031"

Photo of Iron-Eater

Iron-Eater
5J2H - 90° SiNi Face Mill

Ø3.000-4.000"
Quad depth of cut: .24"
Octo depth of cut: .15"
Wedge held inserts
Pre-balanced

Photo of ChaseQuad

ChaseQuad
5N2H_R00 - 45° Face Mill

Ø2.00-8.00"
.23" Depth of cut
12mm Insert with 4 indexes
32-63 Ra surface finishes

Photo of Iron-Eater

Iron-Eater
5N2H_R01 - 45° SiN Face Mill

Ø2.00-6.00"
.24" Depth of cut
12mm Insert with 4 indexes
32-63 Ra surface finishes
Insert Corners: 0.031" 0.096" R

Photo of ChaseOcto

ChaseOcto
5N2L Face Mill

43° Lead Face Mill
7 mm Wedge held insert
.19" Max. depth of cut
Compatable with octo and button insert styles

Photo of HiPos-Quad

HiPos-Quad
5N6F - 45° Face Mill

Ø2.000-3.000"
9.6 mm Insert with 4 indexes
.18" Depth of cut
32-63 Ra surface finishes

Photo of RotoMill

RotoMill
5N6H - 45° & Button Face Mill

Ø2.000-4.000"
5 mm Insert with 8 indexes
.13" Depth of cut
Finishes as good as 63 Ra
Octo and Button insert options

Photo of HiPos-Quad

HiPos-Quad
5N6J - 45° Lead Face Mill

Ø2.000-4.000"
14 mm Insert with 4 indexes
.39" Depth of cut
Finishes as good as 63 Ra

Photo of RotoMill

RotoMill
5N6K (6 mm Insert)

45° Face Mill
.16" Max. depth of cut
Insert with 8 indexes

Photo of HiPos-Quad

HiPos-Quad
5N6R - 45° Face Mill

Ø3.000-6.000"
15 mm Insert with 4 indexes
.40" Depth of cut
Finishes as good as 40 Ra

Photo of FormMaster

FormMaster
5W6 (.500-1.00" Inserts)

Button Face Mill
Cutting Edge Length: .25", .375" & .50"
Button I.C.: .500", .750" & 1.000"

Photo of FormMaster Plus

FormMaster Plus
5W7 (10-20 mm Inserts)

Button Face Mill
Button I.C.: 10, 12, 16 & 20 mm
Inch cutter bodies

Photo of PowerMax

PowerMax
6K8B Face Mill

Hi-Density Positive Face Mill
.60" Max. depth of cut
4° Lead
Insert radius: .031"

Photo of Inactive Product

Inactive Product
6X1V, 6X2V (Aluminum Body)

Light Weight Aluminum Body Face Mill
.25" Max. Depth of Cut

Photo of BlackMax

BlackMax
9N6A - 45° Face Mill

Ø2.00- 6.00"
Insert with 4 indexes
.31" Max depth of cut
Power shear geometry ideally suited for hard materials, weld & interruptions

Photo of PunchIn

PunchIn
CHU, PHU Plunge Mill

Ø2.000-3.000" Plunge Mills
Insert radii: .031", .062", .125"

Photo of

DJ_H - 90° Face Mill

.59" Max. depth of cut
Insert with 6 indexes

Photo of QuadPlus Finish

QuadPlus Finish
DJ1H - 90° Adjustable Finishing Face Mill

Ø2.000-8.000"
12 mm Insert with up to 8 indexes
.040" Max. Depth of Cut (.020" recommended)
Easy & accurate adjustment within .0002"
5-20 Ra surface finish capability

Photo of ISO-Plus

ISO-Plus
DL5H DL6H - 75° Face Mill

Ø2.000-6.000"
12 mm Insert with 8 indexes
.35" Depth of cut
Carbide & SiN options
Great Price-per-Edge economy!

Photo of ISO-Plus

ISO-Plus
DL5T DL6T - 85° Roughing Face Mill

Ø2.000-6.000"
13 mm Insert with 8 indexes
.49" Depth of Cut
Finishes as good as 100 Ra
Carbide & SiN options
Great Price-per-Index economy!
Insert Corner: .015", .031", .047, .062" R.

Photo of FormMaster Cera

FormMaster Cera
DW*H (.500" Insert)

Ceramic Button Face Mill
.25" Max. depth of cut
Ceramic button inserts

Photo of FormMaster Cera Plus

FormMaster Cera Plus
DW1H*R02, DW2H*R02 - Ceramic Button Face Mill

Ø2.000-3.000”
.500" IC insert, double sided
.250” Max. depth of cut
Secure Clamping, flat & dimple style inserts
Reliable performance, strength & economy!

Photo of MaxSFeed

MaxSFeed
EJ5B, EJ6B - 90° High-Density Face Mill

Ø1.500-3.000"
8 mm insert with 4 indexes
.317" Max. Depth of Cut
Insert corners: .015", .031", .062" R

Photo of OctoPlus

OctoPlus
OP1N - 42° Face Mill with Wedge-Held Inserts

Ø3.000-12.000"
.20" Depth of cut
9 mm Inserts with 16 indexes
20-40 Ra surface finishes when using wiper in one pocket
Carbide & SiN options
RH & LH rotation
Great price-per-edge economy!

Photo of SMax

SMax
SJ2N, SJ6N - 90° Heavy Duty Face Mill

Ø4.000-12.000"
Insert with 4 indexes
.68" Max. depth of cut
2 Different steel seating pads accomodate both general purpose and heavy duty inserts
SJ2N offers pocket protection

Photo of SMax

SMax
SJ5E Face Mill

90° High-Density Face Mill
.36" Max. depth of cut
10.5 mm Insert with 4 indexes

Photo of SMax

SMax
SJ6H Face Mill

90° Low-density face mill
.46" Depth of cut
12.7 mm Insert with 4 R.H. indexes
Insert corners: .031", .063" R

Photo of SMax

SMax
SN6N - 45° Face Mill

Ø4.000-6.000"
18 mm Insert with 4 R.H. indexes
.35" Max. depth of cut

Photo of

VHU Plunge Mill

Ø2.000-6.000" Plunge Mill
.47" Max. depth of cut
Insert radii: .031", .063", .125"
Insert with up to 8 indexes (4RH-4LH)

Photo of VMax

VMax
VK5V - 90° High Density Face Mill

Ø2.000-4.000"
Inserts with up to 8 indexes (4RH/4LH)
.46" Max. depth of cut (2RH/2LH)
.23" Max. depth of cut at 90° (4RH/4LH)
Left & right hand cutter bodies
Insert radii: .031", .063", .125"
Insert chamfer: .031" x 45°

Photo of VMax

VMax
VK6V - 90° Medium Density Face Mill

Ø2.000-4.000"
Inserts with up to 8 indexes (4RH or 4LH)
.46" Max. depth of cut (2RH or 2LH)
.23" Max. depth of cut at 90° (4RH or 4LH)
Left & right hand cutter bodies
Insert corners: .031", .063", .125"R & .031" x 45°

Photo of VMax

VMax
VK6V - Coarse Density

90° Face Mill
.46" Max. depth of cut
.23" Max. depth of cut at 90°
Insert with up to 8 indexes (4 RH / 4 LH)
Inserts with radii or chamfer

Photo of VMax

VMax
VL6V

87° Face Mill
.20" Max. Depth of Cut, Full Effective
.45" Max. Depth of Cut, 1/2 Effective
Insert with 8 Indexes

Photo of VMax

VMax
VM2N - 30° Lead Heavy Duty Face Mill

Ø3.000 - 8.000"
30° Face Mill
8mm Insert Thickness
Insert Radii: 0.005" R

Photo of VMax

VMax
VM6V - 30° Lead Face Mill

Ø2.50 - 12.00"
30° Lead Face Mill
.45" Max. depth of cut with 4 indexes, 1/2 Effective
.15" Max. depth of cut with 8 indexes, Full Effective

	EDP	Diameter	Part Number	Adaption	Number of Inserts	DXF File	STEP Light File	STEP Detailed File
	3301148	NA	SCREW1/2-20X7/8SEM1	NA	-	n/a	n/a	n/a