EDP: 6308965 - Part Number: FR0450029T7R01 IN2205 - Series: FR - 5xD Solid Carbide Drill, 3-Flute

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	ISA26 (Industrial Supply Association)	April 21–22, 2026	Huntington Convention Center, Cleveland, OH	Show Website
2	IMTS2026 (International Manufacturing Technology Show)	September 14 thru 19, 2026	McCormick Place, Chicago, IL	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- [email protected]

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > SolidDrill3 > FR - 5xD Solid Carbide Drill, 3-Flute > 6308965 FR0450029T7R01 IN2205

EDP: 6308965
Part: FR0450029T7R01 IN2205
Series: FR - 5xD Solid Carbide Drill, 3-Flute

View STEP

Coolant-Thru

Drilling

DC Cutting Dia.

0.1772 (4.50 mm)

PL Point Length

0.88 mm

LU Usable Length

29.00 mm

LCF Chip Flute Length

37.00 mm

LS Shank Length

35.00 mm

OAL Overall Length

74.00 mm

DCON Shank Dia.

6.00 mm

SIG Point Angle

140

CSP Coolant

Yes

ZEFF Eff. Teeth

3

ULDR Usable Length Dia. Ratio

5×

Available : 0
International: 6

Product Series Features:

Ø3.97-12 mm
Cylindrical Shank (Metric)
Self-Centering Point
Internal Coolant

Notes:

Metric Shanks
Metric and Inch Drilling Diameters

Coolant-Thru

Drilling

DC - Cutting Dia.	0.1772 (4.50 mm)
PL - Point Length	0.88 mm
LU - Usable Length	29.00 mm
LCF - Chip Flute Length	37.00 mm
LS - Shank Length	35.00 mm
OAL - Overall Length	74.00 mm
DCON - Shank Dia.	6.00 mm
SIG - Point Angle	140
CSP - Coolant	Yes
ZEFF - Eff. Teeth	3
ULDR - Usable Length Dia. Ratio	5×
DXF File
STEP Light File
STEP Detailed File

Photo of HydroMax

HydroMax
BT*FC*HYDRO

BT MAS-403 Face Contact
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
Balanced G2.5@18,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of HydroMax

HydroMax
BT*HYDRO

BT MAS-403
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
BT30/BT40 balanced G2.5@18,000 RPM
BT50 balanced G2.5@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of HydroMax

HydroMax
DIN69871*HYDRO

DIN69871 V-Flange
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
DIN69871-40 balanced G2.5@18,000 RPM
DIN69871-50 balanced G2.5@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Collet
Single Diameter (Metric)
8 Slot Rubber Sealed Design
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
100 Bar Max
For use with coolant through cutting tools

Photo of Tool Holders

Tool Holders
ER*SRK

ER Series Integral Collet
Thermal Shrink Adaption (Metric)
100 Bar Max
For use with Carbide Shank tooling ONLY
For through coolant, preset screw must be removed
*See Notes below

Photo of HydroMax

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck (Metric)
HSKA50, A63 balanced G2.5@25,000RPM
HSKA80, A100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of HydroMax

HydroMax
HSKA*HYDRO Long

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck (Metric)
HSKA50, A63 balanced G2.5@25,000RPM
HSKA80, A100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of Tool Holders

Tool Holders
SC*HYDRO

OBSOLETE - See SC*HYDRO*HD
Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Photo of HydroMax

HydroMax
SC*HYDRO

Sealed Reduction Sleeve (Inch to Metric)
For use in hydraulic milling chucks
Max Runout 0.0001"
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Photo of HydroMax

HydroMax
SC*HYDRO*HP

Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
Runout Accuracy <0.003 mm
Max Coolant Pressure 85 Bar
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Photo of Tool Holders

Tool Holders
SC*SEAL

Sealed Power Milling Chuck Sleeve (Metric)
100 Bar Max
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

SolidDrill3 3 Flute Drills

Job-064 Improved Grade IN2205

New-321-5 p11 Oper. Guidelines