EDP: 3098107 Part: TJ6J080R00 Series: TJ5J TJ6J - 90° & Hi-Feed Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 3
International: 8
Product Series Features:
- Ø50-125 mm
- 14 mm Insert with 4 indexes
- 13.8 mm 90° Depth of Cut
- 3.0 mm Hi-Feed Depth of Cut
- Insert corners: 0.8 mm R & Hi-Feed
- 32-63 Ra finish w/ integrated wiper (WEP)
- 63-125 Ra finish w/o integrated wiper
Notes:
- Relieve cutter body when using -HF insert (see product bulletin).
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7002873 | SM50-127-10 | SE03-72 | Screw, M5 × 0.8 × .500", T20 Torx drive | n/a | n/a | n/a | ||
| 7019679 | DS-A00T | DS-A00T | Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot | n/a | n/a | n/a | ||
| 7002096 | DS-T156B | BLD T15/S7 | T15 Torx; 90 mm OAL; 6 mm Hex drive | n/a | n/a | |||
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2920529 | DT-44-.25 | DT-44-.25 | Torque Adapter Unit preset to 44 in lb (5.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 7018957 | DS-T20B1 | DS-T20B1 | T20 Torx Bit, 2.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a |
