EDP: 3212166 - Part Number: XS6053540S6R01 - Series: XS - 8xD QwikReam Shanks

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	PMTS (Precision Machining Technology Show)	April 1–3, 2025	Huntington Convention Center, Cleveland, OH	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- info@ingersoll-imc.com

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > Qwik-Ream > XS - 8xD QwikReam Shanks > 3212166 XS6053540S6R01

EDP: 3212166
Part: XS6053540S6R01
Series: XS - 8xD QwikReam Shanks

View STEP

Coolant-Thru

DCN Cutting Dia. Min.

0.5316 (13.503 mm)

DCX Cutting Dia. Max.

0.6299 (16.000 mm)

SSC Insert Seat Size

XT6

S Thickness

0.374

LU Usable Length

5.08

LF Functional Length

6.94

LS Shank Length

1.89

DCON Shank Dia.

0.625

ULDR Usable Length Dia. Ratio

8×

CSP Coolant

Yes

BMC Body Material Code

Steel

Available : 0
International: 5

Product Series Features:

Steel Cylindrical Shank
8xD

Coolant-Thru

DCN - Cutting Dia. Min.	0.5316 (13.503 mm)
DCX - Cutting Dia. Max.	0.6299 (16.000 mm)
SSC - Insert Seat Size	XT6
S - Thickness	0.374
LU - Usable Length	5.08
LF - Functional Length	6.94
LS - Shank Length	1.89
DCON - Shank Dia.	0.625
ULDR - Usable Length Dia. Ratio	8×
CSP - Coolant	Yes
BMC - Body Material Code	Steel
DXF File
STEP Light File
STEP Detailed File

Photo of HydroMax

HydroMax
CAT*HYDRO

CAT V-Flange
Hydraulic Milling Chuck
CAT40 Balanced G2.5@18,000 RPM
CAT50 Balanced G2.5@12,000 RPM
Runout Accuracy <.00012"
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Collet
Single Diameter
8 Slot Rubber Sealed Design
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with coolant through cutting tools

Photo of HydroMax

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck
HSKA50-A63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of HydroMax

HydroMax
SC*HYDRO

Sealed Reduction Sleeve
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Photo of Tool Holders

Tool Holders
SC*SEAL

Sealed Power Milling Chuck Sleeve
1450 Max PSI
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

Photo of Qwik-Ream

Qwik-Ream
XLB - Thru Hole Carbide Reaming Head

Ø.4528 - 1.2600"
Nominal Inch Diameters
Produced to H7 Tolerance
LH Flute
Front End Code B - 25°× 0.042"
Grade IN2005

Photo of Qwik-Ream

Qwik-Ream
XLB - Thru Hole Carbide Reaming Head

Ø11.5-32 mm
Nominal Metric Diameters
Produced to H7 Tolerance
LH Flute
Front End Code B - 25°× 0.042"
Grade IN2005

Photo of Qwik-Ream

Qwik-Ream
XSA - Blind Hole Carbide Reaming Head

Ø.5000-1.2500"
Nominal Inch Diameters
Straight Flute
Produced to H7 Tolerance
Front End Code A - 45°× 0.020"
Grade IN2005

Photo of Qwik-Ream

Qwik-Ream
XSA - Blind Hole Carbide Reaming Head

Ø11.5-32.0 mm
Nominal Metric Diameters
Straight Flute
Front End Code A - 45°× 0.020"
Grade IN2005

	EDP	Part Number	ISO Number	Description	Additional Info	DXF File	STEP Light File	STEP Detailed File
	4301106	TM-B6-SCR	TM-B6-SCR	Qwik Ream XT6 Bayonet Screw		n/a	n/a	n/a
	4301109	TM-B6-KEY	TM-B6-KEY	Clamping Key for Qwik Ream XT6 Connection		n/a	n/a	n/a