EDP: 3211883 - Part Number: XS8200084T4R01 - Series: XS - 3xD QwikReam Shanks

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	PMTS (Precision Machining Technology Show)	April 1–3, 2025	Huntington Convention Center, Cleveland, OH	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- info@ingersoll-imc.com

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > Qwik-Ream > XS - 3xD QwikReam Shanks > 3211883 XS8200084T4R01

EDP: 3211883
Part: XS8200084T4R01
Series: XS - 3xD QwikReam Shanks

View STEP

Coolant-Thru

DCN Cutting Dia. Min.

0.7874 (20.001 mm)

DCX Cutting Dia. Max.

1.0000 (25.400 mm)

SSC Insert Seat Size

XT8

S Thickness

12.90 mm

LU Usable Length

77.9 mm

LF Functional Length

125.0 mm

LS Shank Length

50.0 mm

DCON Shank Dia.

20.00 mm

ULDR Usable Length Dia. Ratio

3×

CSP Coolant

Yes

BMC Body Material Code

Steel

Available : 0
International: 16

Product Series Features:

Steel Cylindrical Shank (Metric)
3xD

Coolant-Thru

DCN - Cutting Dia. Min.	0.7874 (20.001 mm)
DCX - Cutting Dia. Max.	1.0000 (25.400 mm)
SSC - Insert Seat Size	XT8
S - Thickness	12.90 mm
LU - Usable Length	77.9 mm
LF - Functional Length	125.0 mm
LS - Shank Length	50.0 mm
DCON - Shank Dia.	20.00 mm
ULDR - Usable Length Dia. Ratio	3×
CSP - Coolant	Yes
BMC - Body Material Code	Steel
DXF File
STEP Light File
STEP Detailed File

Photo of HydroMax

HydroMax
ADJ*HYDRO

ADJ Hydraulic Flange Nose (Metric)
Radial & Angular Adjustable
Modular Assembly, Requires ADJ Flange Base
For use in semi-finish and finish applications
Chucking forces will be reduced by 25% if reduction sleeves are used
Reduction sleeves are required for use with Whistle Notch & double Weldon shanks

Photo of HydroMax

HydroMax
BT*FC*HYDRO

BT MAS-403 Face Contact
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
Balanced G2.5@18,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
BT*FC*MAXIN

BT MAS-403 Face Contact
Power Milling Chuck (Metric)
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves sold separately

Photo of HydroMax

HydroMax
BT*HYDRO

BT MAS-403
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
BT30/BT40 balanced G2.5@18,000 RPM
BT50 balanced G2.5@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of HydroMax

HydroMax
BT*HYDRO*HD

BT MAS-403
Heavy Duty Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
Balanced G2.5@25,000 RPM
Chucking forces will be reduced by 25% when reduction sleeves are used
*See Notes below

Photo of Tool Holders

Tool Holders
BT*MAXIN

BT MAS-403
Power Milling Chuck (Metric)
Chucking forces will be reduced by 25$% when reduction sleeves are used
Optional reduction sleeves sold separately

Photo of HydroMax

HydroMax
C*HYDRO*HD

C-Adapter (ISO 26623-1)
Heavy Duty Hydraulic Milling Chuck (Metric)
Quick Change Holder
Runout Accuracy <0.003 mm
High Torque Transmission
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
Balanced G2.5@25,000 RPM
*See Notes below

Photo of Tool Holders

Tool Holders
C*MAXIN

C-Adapter (ISO 26623-1)
Power Milling Chuck (Metric)
Quick Change Holder
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves sold separately

Photo of HydroMax

HydroMax
DIN69871*HYDRO

DIN69871 V-Flange
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
DIN69871-40 balanced G2.5@18,000 RPM
DIN69871-50 balanced G2.5@12,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of HydroMax

HydroMax
DIN69871*HYDRO*HD

DIN69871 / SK V-Flange
Heavy Duty Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Tapping, and difficult high volume machining applications
Balanced G2.5@25,000 RPM
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
DIN69871*MAXIN

DIN69871 V-Flange
Power Milling Chuck
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves sold separately

Photo of HydroMax

HydroMax
DIN69880*HYDRO

DIN69880 VDI
Hydraulic Milling Chuck (Metric)
High runout accuracy of < 0.003 mm
For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
ER*SEAL*AA JET

DIN 6499/ISO 15488-B Collet
Single Diameter (Metric)
8 Slot Rubber Sealed Design with 4 Cooling Jets directing coolant flow to the cutting edge
AA High Precision
0.005 mm TIR
Collapse Range 0.2 mm Max
Super Finish Surface with Anti-Corrosion protection
100 Bar Max
For use with solid shank cutting tools
Recommended for improved runout & clamping torque

Photo of Tool Holders

Tool Holders
ER*SPR

ER Series DIN 6499 /ISO15488-B Spring Collet
Inch/Metric Combination
.0004" TIR
Hard Touch Coated
NOTE: ER11 COLLETS SHOWN WITH .039" (1 mm) CLAMPING RANGE HAVE BEEN PHASED OUT AND REPLACED WITH .020" (0.5 mm) CLAMPING RANGE

Photo of Tool Holders

Tool Holders
ER*SPR*AA

ER Series DIN 6499 Spring Collet
Inch/Metric Combination
AA High Precision
.0002" TIR
Hard Touch coated

Photo of HydroMax

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck (Metric)
HSKA50, A63 balanced G2.5@25,000RPM
HSKA80, A100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of HydroMax

HydroMax
HSKA*HYDRO Long

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck (Metric)
HSKA50, A63 balanced G2.5@25,000RPM
HSKA80, A100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of Tool Holders

Tool Holders
HSKA*MAXIN

HSK-A (DIN 69893/A)
Power Milling Chuck (Metric)
Chucking forces will be reduced by 25% when reduction sleeves are used
Optional reduction sleeves sold separately

Photo of Tool Holders

Tool Holders
SC*HYDRO

OBSOLETE - See SC*HYDRO*HD
Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Photo of HydroMax

HydroMax
SC*HYDRO

Sealed Reduction Sleeve (Inch to Metric)
For use in hydraulic milling chucks
Max Runout 0.0001"
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Photo of HydroMax

HydroMax
SC*HYDRO*HP

Sealed Reduction Sleeve (Metric)
For use in hydraulic milling chucks
Runout Accuracy <0.003 mm
Max Coolant Pressure 85 Bar
Note: Sleeves are compatible with all cylindrical shanks and flatted shanks 6-20 mm diameter (Sleeves are not recommended for use with flatted shanks over 20 mm diameter)

Photo of Tool Holders

Tool Holders
SC*SPR

Straight Sleeve/Collet (Metric)
For use with MAXIN Power Milling Chucks
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

Photo of Tool Holders

Tool Holders
SC*SPR INCH/METRIC

Straight Sleeve/Collet (Inch OD to Metric ID)
For use with Power Milling Chucks
Chucking forces will be reduced by 25% when optional reduction sleeves are used

Photo of Qwik-Ream

Qwik-Ream
XLB - Thru Hole Carbide Reaming Head

Ø.4528 - 1.2600"
Nominal Inch Diameters
Produced to H7 Tolerance
LH Flute
Front End Code B - 25°× 0.042"
Grade IN2005

Photo of Qwik-Ream

Qwik-Ream
XLB - Thru Hole Carbide Reaming Head

Ø11.5-32 mm
Nominal Metric Diameters
Produced to H7 Tolerance
LH Flute
Front End Code B - 25°× 0.042"
Grade IN2005

Photo of Qwik-Ream

Qwik-Ream
XSA - Blind Hole Carbide Reaming Head

Ø.5000-1.2500"
Nominal Inch Diameters
Straight Flute
Produced to H7 Tolerance
Front End Code A - 45°× 0.020"
Grade IN2005

Photo of Qwik-Ream

Qwik-Ream
XSA - Blind Hole Carbide Reaming Head

Ø11.5-32.0 mm
Nominal Metric Diameters
Straight Flute
Front End Code A - 45°× 0.020"
Grade IN2005

	EDP	Part Number	ISO Number	Description	Additional Info	DXF File	STEP Light File	STEP Detailed File
	4301108	TM-B8-SCR	TM-B8-SCR	Qwik Ream XT8 Bayonet Screw		n/a	n/a	n/a
	4301111	TM-B8-KEY	TM-B8-KEY	Clamping Key for Qwik Ream XT8 Connection		n/a	n/a	n/a