EDP: 3012470 Part: 5N2H-50R01 Series: 5N2H_R01 - 45° SiN Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Available : 0
Product Series Features:
- Ø2.00-6.00"
- .24" Depth of cut
- 12mm Insert with 4 indexes
- 32-63 Ra surface finishes
- Insert Corners: 0.031" 0.096" R
Notes:
- **Note, OBSOLETE product series.
- Refer to the following for stocked alternatives:
- ISO PLUS series DN5H/DN6H
- OctoPlus series ON5H/ON6H
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7000460 | SM30-065-00 | SE02-79 | Screw, M3 x 0.5 × 6.5 mm, T9 Torx drive | n/a | n/a | n/a | ||
| 7002924 | AG00125LLA 1/8" | WS-0022 | 1/8" Hex Drive L-Key | n/a | n/a | n/a | ||
| 7011398 | SB-04-13 | SB-04-13 | Differential Screw, 1/4"-28 × .785", 1/8" Hex | n/a | n/a | n/a | ||
| 7007031 | DS-T09S | DS-0041 | T9 Torx Screwdriver | n/a | n/a | n/a | ||
| 7007141 | PA-0575 | PA-0575 | Insert seat for Silicon Nitride insert, Iron Eater, SPEN44-01 insert | n/a | n/a | n/a | ||
| 7010896 | 2H-422-01 | 2H-422-01 | Wedge .500" × .515" × .375", 1 piece | n/a |
