EDP: 1929249 - Part Number: P3N2F-.375A262R015C - Series: P3N1F & P3N2F - 3-Flute 90° SCEM

Careers About Us

Big Cutter One - Next Stop

,

Big Cutter Two - Next Stop

,

Visit the Big Cutter Page

In-Person
Seminars

View our Schedule

Mobile
Seminars

View our Schedule

View the Trade Shows page...

Our Upcoming Trade Shows

	Show Name	Dates	Location	Website
1	ISA26 (Industrial Supply Association)	April 21–22, 2026	Huntington Convention Center, Cleveland, OH	Show Website
2	IMTS2026 (International Manufacturing Technology Show)	September 14 thru 19, 2026	McCormick Place, Chicago, IL	Show Website

Contact Us
Address:

Ingersoll Cutting Tools
845 S. Lyford Rd.
Rockford, Illinois 61108

Phone or E-Mail:

- 815-387-6600
- [email protected]

Tech
Support

For Technical Questions

Customer
Service

Get General Assistance

Home > PrimoAluF > P3N1F & P3N2F - 3-Flute 90° SCEM > 1929249 P3N2F-.375A262R015C

EDP: 1929249
Part: P3N2F-.375A262R015C
Series: P3N1F & P3N2F - 3-Flute 90° SCEM

View STEP

Shoulder

Coolant-Thru

DC Cutting Dia.

0.3750

RE/CHW Corner Radius/Chamfer

0.015 R

APMX Depth of Cut Max.

2.625

ULDR Usable Length Dia. Ratio

7×

OAL Overall Length

4.75

FHA Flute Helix Angle

40° Avg.

KAPR Cutting Edge Angle

90

DCON Shank Dia.

0.375

CSP Coolant

Yes

FIGURE Figure

2

ZEFF Eff. Teeth

3

Available : 10
International: 8

Product Series Features:

AluF for Finishing Aluminum
Ø.125" - 1.000"
Coolant thru, .250"DC or larger
3-Flute, Cylindrical shank
Variable Pitch
Variable (Different) Helix, 40° Avg.
4x, 5x, 6x, 7xD depth of cut (APMX )
Corner Radius: .008" .015" .030" .060" .090" .125"
Grade: IN05S

Shoulder

Coolant-Thru

DC - Cutting Dia.	0.3750
RE/CHW - Corner Radius/Chamfer	0.015 R
APMX - Depth of Cut Max.	2.625
ULDR - Usable Length Dia. Ratio	7×
OAL - Overall Length	4.75
FHA - Flute Helix Angle	40° Avg.
KAPR - Cutting Edge Angle	90
DCON - Shank Dia.	0.375
CSP - Coolant	Yes
FIGURE - Figure	2
ZEFF - Eff. Teeth	3
DXF File
STEP Light File
STEP Detailed File

Choose a Section

Photo of HydroMax

HydroMax
CAT*HYDRO

CAT V-Flange
Hydraulic Milling Chuck
CAT40 Balanced G2.5@18,000 RPM
CAT50 Balanced G2.5@12,000 RPM
Runout Accuracy <.00012"
Recommended for chatter dampening when machining high temperature alloys such as titanium
Chucking forces will be reduced by 25% when using sleeves
*See Notes below

Photo of Tool Holders

Tool Holders
ER*SEAL*AA

ER Series DIN 6499/ISO15488-B Collet
Single Diameter
8 Slot Rubber Sealed Design
AA High Precision
.0002" TIR
Collapse Range 0.008" Max
Super Finish Surface with Anti-Corrosion protection
1450 PSI Max
For use with coolant through cutting tools

Photo of Tool Holders

Tool Holders
ER*SRK

ER Series Integral Collet
Thermal Shrink Adaption
1450 Max PSI
For use with Carbide Shank Tooling only
For through coolant, preset screw must be removed
*See Notes below

Photo of HydroMax

HydroMax
HSKA*HYDRO

HSK-A (DIN 69893/A)
Hydraulic Milling Chuck
HSKA50-A63 balanced G2.5@25,000RPM
HSKA100 balanced G2.5@18,000RPM
Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
*See additional notes below

Photo of HydroMax

HydroMax
SC*HYDRO

Sealed Reduction Sleeve
For use in hydraulic milling chucks
Note: Sleeves are compatible with all cylindrical shanks and Weldon shanks .250"-.750" diameter (Sleeves are not recommended for use with Weldon shanks over .750" diameter)

Photo of Tool Holders

Tool Holders
SC*SEAL

Sealed Power Milling Chuck Sleeve
1450 Max PSI
Preset Screw available for tool positioning (Sold Separately)
*Chucking forces will be reduced by 25% when optional reduction sleeves are used

PrimoAluR Finishing

PrimoAluR Finishing Operating Guidelines