Log In
Careers About Us
Ingersoll Logo Ingersoll Logo
  • Products
    • Indexable Milling

      Indexable Milling

      • Face Mills

        Face Mills

      • End Mills

        End Mills

      • Milling Inserts

        Inserts

      • Slotters

        Slotters

      • Plunge Mills

        Plunge Mills

      • All Indexable Milling

        All Indexable Milling

    • Solid Milling

      Solid Milling

      • Solid

        Solid

      • Modular

        Modular

      • All Solid Milling

        All Solid Milling

    • Boring & Reaming

      Boring & Reaming

      • Precision Boring

        Precision Boring

      • Reamers

        Reamers

      • All Boring & Reaming

        All Boring & Reaming

    • Holemaking Tools

      Holemaking Tools

      • Counterbore Tools

        Counterbore Tools

      • Deep Hole

        Deep Hole

      • Drilling

        Drilling

      • Spotting Engraving

        Spotting/Engraving

      • All Holemaking

        All Holemaking

    • Parting & Grooving

      Parting & Grooving

      • Holders

        Holders

      • Inserts

        Inserts

      • Adapters

        Adapters

      • Micro Tools

        Micro Tools

      • All Parting & Grooving

        All Parting & Grooving

    • Threading

      Threading

      • Thread Milling

        Thread Milling

      • Thread Turning

        Thread Turning

      • All Threading

        All Threading

    • Tool Holding

      Tool Holding

      • Coolant Driven Spindles

        Coolant Driven Spindles

      • Toolholders

        Toolholders

      • Modular Toolholders

        Modular Toolholders

      • ITTEDI

        IT.TE.DI. Holders

      • All Tool Holding

        All Tool Holding

    • Turning

      Turning

      • Turning Holders

        Turning Holders

      • Turning Boring Bars

        Turning Boring Bars

      • Turning Inserts

        Turning Inserts

      • Micro Tools

        Micro Tools

      • Multi-Function Tools

        Multi-Function Tools

      • All Turning

        All Turning

    • Tool Storage

      Tool Storage

      • Matrix Mini

        Matrix Mini

      • Matrix Maxi

        Matrix Maxi

  • Events
    • Big Cutter Seminars
    • Live Seminars
    • Trade Shows
  • Resources
    • Catalogs
    • Product Lines (ePips)
    • Industry Solutions
    • Ingersoll TV
    • Qwik-Cuts 2.0
    • References & Grades
      • Chipbreaker Cross References
      • Turning Grades Cross References
      • Turning Insert Master
      • Turn Line New Grades (PDF)
  • About Us
    • Our Profile
    • Photos
    • Our History
    • Careers
    • Ingersoll Germany
  • Contact Us
    • Tech Support
    • Customer Service
    • Address:
      Ingersoll Cutting Tools
      845 S. Lyford Rd.
      Rockford, IL 61108

    • Phone & Email
      Tel: 815-387-6600
      Email: info@ingersoll-imc.com
      Fax: 815-387-6337

Ingersoll Logo Ingersoll Logo
  • Products
    • Indexable Milling
      • View All Indexable Milling Products...
      • Indexable Milling
      • milling facemill

        Face Mills

        milling endmill

        End Mills

        Milling Inserts

        Inserts


        plungemill

        Plunge Mills

        slotter

        Slotters

    • Solid Milling
      • View All Solid Milling Tools...
      • Solid Milling
      • solid carbide end mill

        Solid

        modular

        Modular

    • Boring & Reaming
      • View All Boring & Reaming Products...
      • Boring & Reaming Tools
      • precision boring

        Precision Boring

        reamers

        Reamers

    • Holemaking
      • View All Holemaking Tools...
      • Holemaking Tools
      • counterbore tools

        Counterbore Tools

        Deep Hole

        Deep Hole


        Drilling

        Drilling

        Spotting Engraving

        Spotting/Engraving

    • Parting & Grooving
      • View All Parting & Grooving Products...
      • Parting & Grooving
      • Holders

        Holders

        Inserts

        Inserts


        Adapters

        Adapters

        Micro Tools

        Micro Tools

    • Threading
      • View All Threading Tools...
      • Threading Tools
      • Thread Milling

        Thread Milling

        Thread Turning

        Thread Turning

    • Tool Holding
      • View All Tool Holders...
      • Tool Holders
      • Coolant Driven Spindles

        Coolant Driven Spindles

        Toolholders

        Toolholders


        Modular Toolholders

        Modular Toolholders

        ITTEDI

        IT.TE.DI. Holders

    • Turning Tools & Inserts
      • View All Turning Products...
      • Turning Tools and Inserts
      • Turning Holders

        Turning Holders

        Boring Bars

        Boring Bars

        Inserts

        Inserts


        Micro Tools

        Micro Tools

        Multi-Function

        Multi-Function

    • Tool Storage
      • View All Matrix Tool Storage...
      • Matrix Tool Storage
      • Matrix Maxi

        Matrix Maxi

        Matrix Mini

        Matrix Mini

    • Product Announcements
  • Resources
    • Product Resources Catalogs, Ingersoll TV and more
    • Milling & HolemakingInsert Grade Information
    • Turning ReferencesInsert Guide, Grade Info
    • Tool Advisors Get help finding the perfect tool
    • Qwik-Cuts 2.0 View Qwik-Cuts newsletters
    Milling ISO Cross Reference

    Milling
    Insert Grades

    Searchable Guide

    Holemaking ISO Cross Reference

    Holemaking
    Insert Grades

    Searchable Guide

    Insert Master Guide

    Turning
    Insert Master

    Insert Guide

    cross-ref

    Turn Line
    Chipbreaker

    Cross References

    iso-cross-ref

    Turning
    Grades

    Cross References

    new-grades

    Turn Grades
    & Chipbreaker

    Insert Info

    Rapid Thread Advisor

    RapidThread
    Advisor

    Select the Correct Tool

    Catalogs

    Catalogs

    View & Download Product Catalogs

    Ingersoll TV

    Ingersoll TV

    See Our Tools in Action!

    Product Lines

    Product Lines

    View All of Our Tooling Options

    Industry Solutions

    Industries

    Learn About our Industry Solutions

    Our Most Recent Qwik-Cuts

    Qwik-Cut December 5 2019

    December 5, 2019

    TT81SERIES Turning Inserts

    Qwik-Cut November 18 2019

    November 18, 2019

    Form-Master Cera+

    Qwik-Cut September 18 2019

    September 18, 2019

    Swiss Machining Seminar

    Qwik-Cut August 30 2019

    August 30, 2019

    Di-Pos Tetra 06 Expansion

    Qwik-Cut August 9 2019

    August 9, 2019

    Quad-Twist PS Chip-Breaker

     

    View All Qwik-Cuts

  • Events
    • Seminars Attend a live or mobile seminar
    • The BIG CutterFind out where the Big Cutters are
    • Trade Shows Find out where we'll be next

    Big Cutter One - Next Stop

    Big Cutter


    ,

    Big Cutter Two - Next Stop

    Big Cutter


    ,

     

    Visit the Big Cutter Page

    Live Seminars

    Live
    Seminars

    View our Schedule

    The Big Cutter Mobile Seminar

    Mobile
    Seminars

    View our Schedule

    View the Trade Show Page...

    Our Upcoming Trade Shows

    Show Name Dates Location Website
    Houstex Trade Show (SME) February 26-28, 2019 Houston, TX
    ISA Convention April 6-9, 2019 Houston, TXD
    Amerimold Trade Show June 12-13, 2019 Rosemont, IL
    Wisconsin Manufacturing & Tech Show October 8-10, 2019 Milwaukee, WI
    Motion + Power Technology Expo (Gear Expo) October 15-17, 2019 Detroit, MI
    South-Tec October 22-24, 2019 Greenville, SC
  • Contact Us

    Address:

    Ingersoll Cutting Tools
    845 S. Lyford Rd.
    Rockford, Illinois 61108

    Phone or E-Mail:

    - 815-387-6600
    - info@ingersoll-imc.com

    Tech Support

    Tech
    Support

    For Technical Questions

    Customer Service

    Customer
    Service

    Get General Assistance

  • Log In
Home

Filter Your Results

Product Categories

Lead Angle

90° Single Row

90°

90° Multiple Row

90°

Lead Angle

Parallelogram

Product Categories

Lead Angle

90° Single Row

90°

90° Multiple Row

90°

Lead Angle

Parallelogram



Photo of Hi-Pos Plus

Hi-Pos Plus
12_1R - Chamfer End Mill

  • Ø.750" Min. (Weldon)
  • 15° 30° 45° 60° & 75° Cutting Edge Angles
  • 150° 120° 90° 60° & 30° Included Angles
  • 13mm Insert with 2 indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1E - 90° End Mill

  • Ø1.00-2.00 (Weldon)
  • .66" Depth of Cut (18 mm Insert)
  • 32-63 Ra surface finishes when engaging integrated wiper (WEP)
  • Insert Corner: .015" .031" .062" .093" & .125" R. Use 12J4E for .187" & .250" R
  • Insert with 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1E - 90° End Mill

  • Ø1.00 (40 Taper)
  • .66" Depth of Cut (18 mm Insert)
  • 32-63 Ra surface finishes when engaging integrated wiper (WEP)
  • Insert Corner: .015" .031" .062" .093" & .125" R.
  • Insert with 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1E - 90° Modular End Mill

  • Ø1.000-1.250" (T-Adaption)
  • .66" Depth of cut
  • 18 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging integrated wiper (WEP)
  • Insert corners: .015", .031", .062", .093", .125" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1F 90° End Mill

  • Ø.500-1.000 (Weldon)
  • .47" Depth of Cut (11 mm Insert)
  • Insert Corner: .015", .031", .062" & .125"R
  • Insert with 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1F 90° Modular End Mill

  • Ø.625-1.500 (Weldon)
  • .47" Depth of cut
  • 11 mm Insert with 2 indexes
  • Insert corners: .015", .032", .062", .125" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1G - 90° End Mill

  • Ø.750-2.000" (Weldon)
  • .63" Depth of cut
  • 17 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015" .031" .062" .093" .125" .156" .187" & .250" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1G - 90° End Mill (Metric)

  • Ø25-40 mm (Weldon)
  • 16 mm Depth of cut
  • 17 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, & 6.4 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1G - 90° Modular End Mill

  • Ø1.000-1.500" (M-Adaption)
  • .63" Depth of cut
  • 17 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093", .125", .156", .187", .250" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1P - 90° End Mill

  • Ø.500-1.500" (Weldon)
  • .35" Depth of cut
  • 9 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .078", .120" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1P - 90° End Mill (Metric)

  • Ø12-25 mm (Weldon)
  • 9 mm Depth of cut
  • 9 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6, 2.0 & 3.1 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1P - 90° Modular End Mill

  • Ø.625-1.250" (M-Adaption)
  • .35" Depth of cut
  • 9 mm Insert with 2 Indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert Corners: .015" .031" .062" .078" & .120"R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1P - 90° Modular End Mill (Metric)

  • Ø12-35 mm (M-Adaption)
  • 9 mm Depth of cut
  • 9 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert Corners: 0.4, 0.8, 1.6, 2.0 & 3.1 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1R - 90° End Mill

  • Ø.750-1.500" (Weldon)
  • .47" Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .078", .093", .125", .156 R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1R - 90° End Mill (Metric)

  • Ø20-32 mm (Weldon)
  • 13 mm Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6, 2.0, 2.4 3.1, 4.0 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1R - 90° Modular End Mill

  • Ø.750-1.500" (M-Adaption)
  • .47" Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .078", .093", .125", .156 R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1R - 90° Modular End Mill (Metric)

  • Ø20-40 mm (M-Adaption)
  • 12 mm Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6, 2.0, 2.4, 3.1, 4.0 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1X - 90° End Mill

  • Ø.750-1.500" (Weldon)
  • .49" Depth of cut
  • 12 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the integrated wiper (WEP)
  • Insert corners: .015" .031", .062" .093" .125", .156 R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J1X - 90° Modular End Mill

  • Ø.750-1.500" (T-Adaption)
  • .49" Depth of cut
  • 12 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the integrated wiper (WEP)
  • Insert corners: .015", .032", .062", .093", .125", .156 R
Photo of Hi-Pos Plus

Hi-Pos Plus
12J4E - 90° End Mill for Large Corner Radius

  • Ø1.00-1.50" (Weldon)
  • .66" Depth of cut
  • 18 mm Insert with 2 indexes
  • Insert corners: .187", .250" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12L1G - 75° Roughing End Mill

  • Ø2.00 (Cylindrical)
  • .15" Depth of cut
  • 17 mm Insert with 2 indexes
  • Insert Corner: .03" R
  • Uses opposing unused edges of AOMT17 insert, offering the value to obtain 4 indexes.
  • Ideal for squaring up blocks and general facing.
Photo of Hi-Pos Plus

Hi-Pos Plus
12L1P - 70° Roughing End Mill

  • Ø2.00 (Cylindrical)
  • .12" Depth of cut
  • 9 mm Insert with 2 indexes
  • Insert Corner: .01" R
  • Uses opposing unused edges of BOMT09 insert, offering the value to obtain 4 indexes.
  • Ideal for squaring up blocks and general facing.
Photo of Hi-Pos Plus

Hi-Pos Plus
12L1R - 70° Roughing End Mill

  • Ø2.00 (Cylindrical)
  • .15" Depth of cut
  • 13 mm Insert with 2 indexes
  • Insert Corner: .01" R
  • Uses opposing unused edges of BOMT13 insert, offering the value to obtain 4 indexes.
  • Ideal for squaring up blocks and general facing.
Photo of Hi-Pos Plus

Hi-Pos Plus
12S1E - 90° Center Cutting End Mill

  • Ø1.500" (Weldon)
  • Drill-mill capable
  • 18 mm Insert with 2 indexes
  • Insert corners: .015", .031" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12S1X - 90° Center Cutting End Mill

  • Ø1.000-1.250" (Weldon)
  • Drill-mill capable
  • 12 mm Insert with 2 indexes
  • Insert corners: .015", .031" R
Photo of Hi-Pos Plus

Hi-Pos Plus
12V1X - Backdraft End Mill

  • Ø.750" (T-Adaption)
  • 12 mm Insert with 2 indexes
  • Insert corners: .015", .031", .062", .093", .125", .156" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22_3R - Chamfer Shell Mill

  • Ø1.75" Min. (Shell Mill)
  • 15° 30° 45° 60° & 75° Cutting Edge Angles
  • 150° 120° 90° 60° & 30° Included Angles
  • 13mm Insert with 2 indexes
  • All Eff. / RH Helix
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3E - 90° Rough & Finish End Mill

  • Ø1.500-2.000" (Weldon)
  • All Eff. / RH Helix
  • 18 mm Insert with 2 indexes
  • Produces smooth wall (no steps)
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3E - 90° Rough & Finish End Mill

  • Ø2.000-2.500" (50 Taper)
  • All Eff. / RH Helix
  • 18 mm Insert with 2 indexes
  • Produces smooth wall (no steps)
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3E - 90° Rough & Finish End Mill

  • Ø2.000-4.000" (Shell Mill)
  • All Eff. / RH Helix
  • 18 mm Insert with 2 indexes
  • Produces smooth wall (no steps)
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert Corner: .015", .031", .062" & .093" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3G - 90° Rough & Finish End Mill

  • Ø2.000" (50 Taper)
  • All Eff. / RH Helix
  • 17 mm Insert with 2 indexes
  • Produces smooth blend between stations (visible line but no step on side wall)
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3G - 90° Rough & Finish End Mill

  • Ø1.500-2.000" (Weldon)
  • All Eff. / RH Helix
  • 17 mm Insert with 2 indexes
  • Produces smooth blend between stations (visible line but no step on side wall)
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3G - 90° Rough & Finish End Mill

  • Ø2.000-3.000" (Shell Mill)
  • All Eff. / RH Helix
  • 17 mm Insert with 2 indexes
  • Produces smooth blend between stations (visible line but no step on side wall)
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert Corner: .015", .031", .062" & .093" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3P - 90° End Mill

  • Ø1.000-1.500" (Weldon)
  • All Eff. / RH Helix
  • 9 mm Insert with 2 indexes
  • Insert corners: .015", .031", .062", .120" R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3P - 90° End Mill (Metric)

  • Ø25-32 mm (Weldon)
  • All Eff. / RH Helix
  • 9 mm Insert with 2 indexes
  • Insert corners: 0.4, 0.8, 1.6, 3.2 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3X - 90° End Mill

  • Ø1.250-1.500" (Z-Adaption)
  • All Eff. / RH Helix
  • 12 mm Insert with 2 indexes
  • Inch corners: .015", .031", .062", .093", .125" R
  • Metric corners: 3 mm, 4 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3X - 90° End Mill

  • Ø1.000-1.500" (Weldon)
  • All Eff./ RH Helix
  • 12 mm Insert with 2 indexes
  • Inch corners: .015", .031", .062", .093", .125" R
  • Metric corners: 3 mm, 4 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J3X - 90° Shell Mill

  • Ø2.000-2.500" (Shell Mill)
  • All Eff. / RH Helix
  • 12 mm Insert with 2 indexes
  • Inch corners: .015", .031", .062", .093", .125" R
  • Metric corners: 3 mm, 4 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
22J5G - 90° Rough & Finish End Mill

  • Ø2.000" (50 Taper)
  • 1/2 Eff. / RH Helix
  • 17 mm Insert with 2 indexes
  • Produces smooth wall (no steps)
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert Corner: .015" .031" .062" .093" .118" .125" .157" .187" & .250" R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1E - 90° Face Mill

  • Ø2.00-6.00"
  • .66" Depth of cut
  • 18 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093", .125" R. Use 2J4E for .187" & .250 R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1G - 90° Face Mill

  • Ø2.00-8.00"
  • .63" Depth of cut
  • 17 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093", .125", .156", .187", .250" R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1G - 90° Face Mill (Metric)

  • Ø40-160 mm
  • 16 mm Depth of cut
  • 17 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, 6.4 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1P - 90° Face Mill

  • Ø1.50-3.00"
  • .35" Depth of cut
  • 9 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .078", .120" R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1P - 90° Face Mill (Metric)

  • Ø32-100 mm
  • 9 mm Depth of cut
  • 9 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6, 2.0 & 3.1 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1R - 90° Face Mill

  • Ø2.00-5.00"
  • .47" Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .078", .093", .125", .156" R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1R - 90° Face Mill (Metric)

  • Ø35-125 mm
  • 12 mm Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6, 2.0, 2.4 3.1 & 4.0 mm R
Photo of Hi-Pos Plus

Hi-Pos Plus
2J1X - 90° Face Mill

  • Ø1.50-2.50"
  • .49" Depth of cut
  • 12 mm Insert with 2 Indexes
  • Insert corners: .015", .031", .093", .125", .156" R
  • 32-63 Ra surface finishes when engaging the integrated wiper (WEP)
Photo of Hi-Pos Plus

Hi-Pos Plus
2J4E - 90° Face Mill for large corner

  • Ø2.00-4.00"
  • .63" Depth of cut
  • 18 mm Insert with 2 indexes
  • Insert corners: .187", .250" R
Photo of Hi-Pos Plus

Hi-Pos Plus
2L1G - 75° Roughing Face Mill

  • Ø4.00
  • .15" Depth of cut
  • 17mm Insert with 2 indexes
  • Insert Corner: .03" R
  • Uses opposing unused edges of AOMT17 insert, offering the value to obtain 4 indexes.
  • Ideal for squaring up blocks and general facing.
Photo of Hi-Pos Plus

Hi-Pos Plus
4W2A - 90° Cartridge Face Mill

  • Ø8.00-12.00"
  • .66" Depth of cut
  • 18 mm Insert with 2 indexes
  • Cartridge pocket protection (sold separately)
Photo of Hi-Pos Plus

Hi-Pos Plus
AOCT11_P - Insert for Non-Ferrous

  • Up-sharp edge
  • Ideal for non-ferrous materials
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOCT12_P - Insert for Non-Ferrous

  • Up-sharp edge
  • Ideal for non-ferrous materials
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT11 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Diverse corner configurations
  • Designed for multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT12 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Diverse corner configurations
  • Designed for multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT12_HS - Insert for SS/Hi-Temp/Ti

  • Keen edge for SS/Hi-Temp/Ti materials
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • Pressed rake face geometry promotes efficient chip formation
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT17 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Diverse corner configurations
  • Designed for multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT17_HS - Insert for SS/Hi-Temp/Ti

  • Keen edge for SS/Hi-Temp/Ti materials
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • Pressed rake face geometry promotes efficient chip formation
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT18 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Diverse corner configurations
  • Designed for multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT18_HS - Insert for SS/Hi-Temp/Ti

  • Keen edge for SS/Hi-Temp/Ti materials
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • Pressed rake face geometry promotes efficient chip formation
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
AOMT18_P - Insert for Non-Ferrous

  • Up-sharp edge
  • Ideal for non-ferrous materials
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
APKT17_DT - PCD insert, Short

  • PCD tip with short length of cut
  • Well suited for non-ferrous and graphite materials
  • 1 Index
Photo of Hi-Pos Plus

Hi-Pos Plus
BOCT09_P - Insert for Non-Ferrous

  • Up-sharp edge & polished rake face
  • Ideal for non-ferrous materials
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BOCT13_P - Insert for Non-Ferrous

  • Up-sharp edge & polished rake face
  • Ideal for non-ferrous materials
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BOCT17_HS - Precision Insert

  • Precision ground edge, ideal for semi-finish and finish cuts
  • Integrated wiper flat on face for producing 32-63 Ra surface finishes
  • Pressed rake face geometry promotes efficient chip formation
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BOCT17_P - Insert for Non-Ferrous

  • Up-sharp edge & polished rake face
  • Ideal for non-ferrous materials
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BODT09 - Neutral Precision, Long

  • Strengthened edge
  • Integrated wiper flat on face for producing surface finishes as good as 20 Ra
  • Ideal for finishing hardened steel > RC 50 in short reach applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BODT09_001 - Neutral Precision, Short

  • Strengthened edge
  • Shortened length of cut to minimize radial forces
  • Integrated wiper flat on face for producing surface finishes as good as 20 Ra
  • Ideal for finishing hardened steel > RC 50 in long reach applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BODT13 - Neutral Precision, Long

  • Strengthened edge
  • Integrated wiper flat on face for producing surface finishes as good as 20 Ra
  • Ideal for finishing hardened steel > RC 50 in short reach applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BODT13_001 - Neutral Precision, Short

  • Strengthened edge
  • Shortened length of cut to minimize radial forces
  • Integrated wiper flat on face for producing surface finishes as good as 20 Ra
  • Ideal for finishing hardened steel > RC 50 in long reach applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BOMT09 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Diverse corner configurations
  • Designed for multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BOMT09_DT1 - PCD insert, Short

  • PCD tip with short length of cut
  • Well suited for non-ferrous and graphite materials
  • 1 Index
Photo of Hi-Pos Plus

Hi-Pos Plus
BOMT09_DT2 - PCD Insert, Long

  • PCD tip with long length of cut
  • Well suited for non-ferrous and graphite materials
  • 1 Index
Photo of Hi-Pos Plus

Hi-Pos Plus
BOMT13 - Multi-Purpose Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Diverse corner configurations
  • Designed for multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
BOMT13_DT2 - PCD Insert, Long

  • PCD tip with long length of cut
  • Well suited for non-ferrous and graphite materials
  • 1 Index
Photo of Hi-Pos Plus

Hi-Pos Plus
BOMT17 - Heavy Duty Insert

  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Additional thickness adds durability & higher rake angles than AOMT17
  • Designed for multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
ZOMT09 - Insert with chip splitters

  • Chip Splitters minimize radial forces and break up harmonics for chatter control
  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Designed for rough cuts with multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
ZOMT12 - Insert with chip splitters

  • Chip Splitters minimize radial forces and break up harmonics for chatter control
  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Designed for rough cuts with multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
ZOMT13 - Insert with chip splitters

  • Chip Splitters minimize radial forces and break up harmonics for chatter control
  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Designed for rough cuts with multiple materials and applications
  • 2 Indexes
Photo of Hi-Pos Plus

Hi-Pos Plus
ZOMT17 - Insert with chip splitters

  • Chip Splitters minimize radial forces and break up harmonics for chatter control
  • Pressed rake face geometry promotes efficient chip formation
  • Integrated wiper flat on face for producing surface finishes as good as 32 Ra
  • Designed for rough cuts with multiple materials and applications
  • 2 Indexes

Filter Your Results

Facebook Logo

Follow @Ingersoll_IMC

Youtube Logo

Sign up for our Qwik-Cuts Newsletter!

Milling

End Mills

Face Mills

Plunge Mills

Slot/T-Slot Mills

Holemaking

Counterbore Tools

Deep Hole

Drilling

Spotting/Engraving

Turning

Turning Inserts

Turning Holders

Turning Boring Bars

 

Parting & Grooving

Holders

Inserts

Adapters

Micro Tools

Tool Holders

Coolant Driven Spindles

Toolholders

Modular Toolholders

IT.TE.DI. Holders

Customer Support

Tech Support

Customer Service

RapidThread Advisor

Turning Insert Master


845 S. Lyford Road • Rockford, IL 61108 USA • 815-387-6600

Ingersoll Logo

© 2017 Ingersoll Cutting Tool Company - All Rights Reserved