EDP: 2911162 Part: 25J3P-2004548R01 Series: 25J3P - 90° End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
Product Series Features:
- Ø2.000"
- 50 Taper Connection
- 13 mm Insert with 4 indexes
- Insert corners: .031", .062", .125" R
- All Eff. / RH Helix
- Ideal for roughing SS & Hi-Temps
Notes:
- Ø 2.00 x 4 flute cutters must use ZDES/ZDMS (chip splitters) if radial width of cut is over .50".
- Nose insert is tipped on a slight angle and may fall outside true form up to .010", depending on insert corner radius.
- Insert screw tightening torque: 30-35
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7019041 | SM40-100-R0 | SM40-100-R0 | Screw, M4 × 0.7 × 10 mm, T15 Torx drive | n/a | n/a | n/a | ||
| 7019679 | DS-A00T | DS-A00T | Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot | n/a | n/a | n/a | ||
| 7002096 | DS-T156B | BLD T15/S7 | T15 Torx; 90 mm OAL; 6 mm Hex drive | n/a | n/a | |||
| 2920528 | DT-35-.25 | DT-35-.25 | Torque Adapter Unit preset to 35 in lb (4.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7011883 | DS-T15B1 | DS-T15B1 | T15 Torx Bit, 2.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a |
