EDP: 2912665 Part: 15G1F-12027E2R01 Series: 15G1F- Hi-Feed End Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 4
Product Series Features:
- Ø1.250-1.500"
- Weldon Shank
- 9mm insert with 4 indexes
- .060" Max. depth of cut
- Outboard wiper produces high-quality shoulder surface finish
Notes:
- Refer to the product bulletin for detailed programming information.
- Insert screw torque: 14-18 in*lb.
- *Images are a representation of the product series and therefore may not be the specific item
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 2912095 | SM30-075-R0 | SM30-075-R0 | Screw, M3 × 0.5 × 7.9 mm, T9 Torx drive | n/a | n/a | n/a | ||
| 7009052 | DS-T09W | DS-0022 | T9 Wing Style Torx Driver | n/a | n/a | n/a | ||
| 2926085 | DS-A00-.25-S | DS-A00-.25-S | Driver Handle for use with multi-component Qwik-Torque system Preset Adapters 2.0 Nm or less | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7009746 | DS-T09B | DS-0029 | T9 Torx Bit; 1.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2926274 | DT-18-.25 | DT-18-.25 | Torque Adapter Unit preset to 17.7 in lb (2.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a |
