EDP: 3019998 Part: 5X6W066R00 Series: 5X6W - 90° Aluminum Router Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
Available : 0
Product Series Features:
- Ø50.00 - 80.00 mm
- 14 mm Insert with 2 indexes
- 15.7 mm Depth of Cut
- 2-Screw clamping ideal for high MRR
- Finishes as good as 15 Ra
- Insert corners: .031" .062" .079" .093" .125" .197" R
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts).
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw at cutter face.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7055908 | DIN912M12X35-12.9 | ISO4762M12X35-12.9 | SHCS, M12 × 1.75 × 35 mm, 10 mm Hex | n/a | n/a | n/a | ||
| 7009052 | DS-T09W | DS-0022 | T9 Wing Style Torx Driver | n/a | n/a | n/a | ||
| 2926085 | DS-A00-.25-S | DS-A00-.25-S | Driver Handle for use with multi-component Qwik-Torque system Preset Adapters 2.0 Nm or less | Optional Accessory Item; Sold Separately; For Clamp Screw | n/a | n/a | n/a | |
| 7009746 | DS-T09B | DS-0029 | T9 Torx Bit; 1.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2926274 | DT-18-.25 | DT-18-.25 | Torque Adapter Unit preset to 17.7 in lb (2.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory Item; Sold Separately; For Clamp Screw | n/a | n/a | n/a | |
| 7070040 | SM30-082-00 | SM30-082-00 | Screw, M3 × 0.5 × 8.2 mm, T9 Torx drive | Torque: 13-18 in lb | n/a | n/a | n/a |
 |
Balanced |
