EDP: 3027735 Part: 5X6W-20R01 Series: 5X6W - 90° Aluminum Router Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 30
Product Series Features:
- Ø2.00-6.00"
- 14 mm Insert with 2 indexes
- .61" Depth of Cut
- 2-Screw clamping ideal for high MRR
- Finishes as good as 15 Ra
- Insert corners: .020" .031" .062" .079" .093" .125" .157" R
Notes:
- Max RPM applies to a properly balanced assembly to G2.5 (toolholder, cutter & inserts).
- To load inserts, lightly tighten both screws first. Next, tighten screw in pocket corner. Finally, tighten screw at cutter face.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7009401 | SD-06-46 | SD06-46 | Retention Bolt, 3/8-24 x 1.25" | 5/16" Hex Drive | n/a | n/a | n/a | |
| 7031379 | SD-06-89 | SD06-89 | SHCS, 3/8-24 × 1.00" 5/16" Hex Drive, with (2) Coolant Grooves | Coolant Bolt - Optional Accessory Item; Sold separately | n/a | n/a | n/a | |
| 2926085 | DS-A00-.25-S | DS-A00-.25-S | Driver Handle for use with multi-component Qwik-Torque system Preset Adapters 2.0 Nm or less | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7009746 | DS-T09B | DS-0029 | T9 Torx Bit; 1.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 2926274 | DT-18-.25 | DT-18-.25 | Torque Adapter Unit preset to 17.7 in lb (2.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 7070040 | SM30-082-00 | SM30-082-00 | Screw, M3 × 0.5 × 8.2 mm, T9 Torx drive | Torque: 13-18 in lb | n/a | n/a | n/a | |
| 7009052 | DS-T09W | DS-0022 | T9 Wing Style Torx Driver | n/a | n/a | n/a |
 |
Balanced |
