Home >
HiPos-Plus >
12J1G - 90° End Mill >
3027820 12J1G032120W6R00
EDP: 3027820
Part: 12J1G032120W6R00
Series: 12J1G - 90° End Mill
View Image
Downloads
DC Cutting Dia.
32.00 mm
APMX Depth of Cut Max.
16.00 mm
LUX Usable Length Max.
120.0 mm
LPR Protruding Length
125.0 mm
OAL Overall Length
185.0 mm
ZEFF Eff. Teeth
2
KAPR Cutting Edge Angle
90.0
DCON Shank Dia.
32.00 mm
CSP Coolant
Yes
RMPX Ramp Angle Max.
9.0
Available : 2
International: 8
Product Series Features:
- Ø25-40 mm
- Weldon Shank (Metric)
- 17 mm Insert with 2 indexes
- Insert corners: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, & 6.4 mm R
- 32-63 Ra surface finishes when engaging the wiper (WEP)
- 16 mm Depth of cut
Notes:
- Relieve cutter body when using insert corner radii larger than R.094 (see product bulletin).
- BOMT17 produces slightly larger diameter (up to .25mm) for 25mm cutter.
| DC - Cutting Dia. | 32.00 mm |
| APMX - Depth of Cut Max. | 16.00 mm |
| LUX - Usable Length Max. | 120.0 mm |
| LPR - Protruding Length | 125.0 mm |
| OAL - Overall Length | 185.0 mm |
| ZEFF - Eff. Teeth | 2 |
| KAPR - Cutting Edge Angle | 90.0 |
| DCON - Shank Dia. | 32.00 mm |
| CSP - Coolant | Yes |
| RMPX - Ramp Angle Max. | 9.0 |
Choose a Section
| Part Number | Corner | Application | Grades | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IN1030 | IN10K | IN2005 | IN2035 | IN2036 | IN2504 | IN2505 | IN2510 | IN2530 | IN2540 | IN4030 | IN6537 | IN7035 | IN90D | ||||
| AOCT170508FR-P | 0.031 R | General Purpose Aluminum | |||||||||||||||
| AOMT170504R | 0.015 R | Multi-Purpose | |||||||||||||||
| AOMT170508R | 0.031 R | Multi-Purpose | |||||||||||||||
| AOMT170508R-HS | 0.031 R | SS/Hi-Temp/Ti | |||||||||||||||
| AOMT170510R | 0.039 R | Multi-Purpose | |||||||||||||||
| AOMT170516R | 0.062 R | Multi-Purpose | |||||||||||||||
| AOMT170516R-HS | 0.062 R | SS/Hi-Temp/Ti | |||||||||||||||
| AOMT170524R | 0.093 R | Multi-Purpose | |||||||||||||||
| AOMT170532R | 0.125 R | Multi-Purpose | |||||||||||||||
| AOMT170532R-HS | 0.125 R | SS/Hi-Temp/Ti | |||||||||||||||
| AOMT170540R | 0.157 R | Multi-Purpose | |||||||||||||||
| AOMT170548R | 0.187 R | Multi-Purpose | |||||||||||||||
| AOMT170550R | 0.197 R | Multi-Purpose | |||||||||||||||
| AOMT170564R | 0.25 R | Multi-Purpose | |||||||||||||||
| AOMT170564R-HS | 0.25 R | SS/Hi-Temp/Ti | |||||||||||||||
| APKT170504R-DT | 0.015 R | PCD Tipped | |||||||||||||||
| BOCT170508FR-P | 0.031 R | Grd/Pol for Al | |||||||||||||||
| BOCT170508R-HS | 0.031 R | Precision - SS/Hi-Temp/Ti | |||||||||||||||
| BOCT170516FR-P | 0.062 R | Grd/Pol for Al | |||||||||||||||
| BOCT170530FR-P | 0.118 R | Grd/Pol for Al | |||||||||||||||
| BOCT170532FR-P | 0.125 R | Grd/Pol for Al | |||||||||||||||
| BOCT170564FR-P | 0.25 R | Grd/Pol for Al | |||||||||||||||
| BOMT170608R | 0.031 R | Heavy-Duty | |||||||||||||||
| ZOCT170508FR-P | 0.031 R | Grd/Pol for Al - Chip Splitters | |||||||||||||||
| ZOMT170508R | 0.031 R | Multi-Purpose - Chip Splitters | |||||||||||||||
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7019679 | DS-A00T | DS-A00T | Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot | n/a | n/a | n/a | ||
| 7006441 | SM40-084-20 | SE02-B7 | Screw, M4 X 0.7 × 8.4 mm, T15 Torx drive | n/a | n/a | n/a | ||
| 2920528 | DT-35-.25 | DT-35-.25 | Torque Adapter Unit preset to 35 in lb (4.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 7011883 | DS-T15B1 | DS-T15B1 | T15 Torx Bit, 2.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a |
