EDP: 3027850 Part: 2J1G160R00 Series: 2J1G - 90° Face Mill
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
International: 5
Product Series Features:
- Ø40.00 - 160.00 mm
- Bore & Keyway
- 16.00 mm Depth of cut
- 17 mm Insert with 2 indexes
- 32-63 Ra finish when engaging the wiper
- Insert radii: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, 6.4 mm R
Notes:
- Relieve cutter body when using insert corner radii larger than R.094 (see product bulletin).
- BOMT17 produces slightly smaller diameter (up to .17mm) for cutters 80mm and larger.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7063464 | DIN912M20X40-12.9 | ISO4762M20X40-12.9 | SHCS, M20 × 2.50 × 40 mm, 17 mm Hex | n/a | n/a | n/a | ||
| 7019679 | DS-A00T | DS-A00T | Magnetic Combination Straight & T-Style Handle with (2) 6 mm Hex Drive slots (1) Bit Holding Slot | n/a | n/a | n/a | ||
| 2920530 | DS-A00-.25-T | DS-A00-.25-T | Driver Handle for use with multi-component Qwik Torque system Preset Torque Adapters over 2.0Nm | Optional Accessory Item; Sold Separately | n/a | n/a | n/a | |
| 7002096 | DS-T156B | BLD T15/S7 | T15 Torx; 90 mm OAL; 6 mm Hex drive | n/a | n/a | |||
| 7000461 | SM40-120-20 | SE02-81 | Screw, M4 × 0.7 × 12 mm, T15 Torx drive | n/a | n/a | n/a | ||
| 2920528 | DT-35-.25 | DT-35-.25 | Torque Adapter Unit preset to 35 in lb (4.0 N·m) for use with the multi-component Qwik Torque system | Optional Accessory item; Sold Separately | n/a | n/a | n/a | |
| 7011883 | DS-T15B1 | DS-T15B1 | T15 Torx Bit, 2.00" OAL; 1/4" Hex drive | Optional Accessory Item; Sold Separately | n/a | n/a | n/a |
