EDP: 4543410 Part: S010T06CA064 Series: S*T*CA - Carbide Shank, No Neck
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 10
International: 518
Product Series Features:
- Cylindrical Shank (Metric)
- Chip Surfer Connection
- No Neck Relief
- Coolant options
- Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder
Notes:
- When assembling, be sure carbide tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
- Tightening Torque:
- T05=60 in lb
- T06=90 in lb
- T08=130 in lb
- T10=250 in lb
- T12=250 in lb
- T15=350 in lb
