EDP: 5840213 Part: 48J10007T6RD13 IN2005 Series: 48D & 48J - 90° End Mill Tip
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 0
International: 1444
Product Series Features:
- Ø8-12 mm
- Chip Surfer Connection
- 6 Flute, 30 or 45° Helix
- .7xD Flute Length
- Non-Center Cutting
- Corner: Sharp, 0.5, 1.0 & 1.5 R
Notes:
- When assembling, be sure tip is seated firmly on shank with no gap. No lubricant on adaption. Wrenches sold seperately.
| EDP | Part Number | ISO Number | Description | Additional Info | DXF File | STEP Light File | STEP Detailed File | |
|---|---|---|---|---|---|---|---|---|
| 7008923 | WS-0029 | WS-0029 | 5 mm (C) & 8 mm (D) wrench head openings for use with T06 Chip Surfer tooling | Optional Accessory Item; Sold separately | n/a | n/a | ||
| 7011297 | DT-90-08 | DT-90-08 | Torque Wrench for T06 Chip Surfer Heads 8 mm Opening Pre-Set to 90 in lbs | Optional Accessory Item; Sold separately | n/a | n/a | n/a |
