Home > Chip-Surfer > DIN69871*T (Metric) > 2927927 DIN6987140T15X50

Trade Logo  EDP: 2927927  Part: DIN6987140T15X50  Series: DIN69871*T (Metric)

View STEP

Available : 0
International: 5

Product Series Features:

  • DIN69871 V-Flange
  • Chip Surfer "T" Style Thread Connection
  • AD Style Coolant (coolant through the center)
  • Balanced G2.5@20,000 RPM
  • Do not apply lubricant to the threaded connection
Notes:
  • *Images are a representation of the product series as a whole and therefore may not be an exact representation of a specific item

Chip-Surfer
45B_T_P - Ball Nose for Alum

  • Ø.312-1.000" (T-Adaption)
  • 2 Flute, 45° Helix
  • Sharp edge and polished flutes for non-ferrous materials

Chip-Surfer
45B_T_P - Ball Nose for Alum (Metric)

  • Ø8-25 mm (T-Adaption)
  • 2 Flute, 45° Helix
  • Sharp edge and polished flutes for non-ferrous materials

Chip-Surfer
45D-P - 90° End Mill Tip for Aluminum

  • Ø.375-.750" (T-Adaption)
  • 2 Flute, 35°or 45° Helix
  • Center-cutting
  • Corner: Sharp, .020" .062" & .125" R

Chip-Surfer
46D_RN - 90° End Mill Tip for Aluminum

  • Ø.312-.750" (T-Adaption)
  • 3 Flute, 45° Helix
  • Center-cutting
  • Serrated edge
  • Corner: .008" R

Chip-Surfer
46D-P - 90° End Mill Tip for Aluminum

  • Ø.312-1.000" (T-Adaption)
  • 3 Flute, 45° Helix
  • Center-cutting
  • Corners: .020", .031", .062", .094", .125" R

Chip-Surfer
47_RN & 48_RN - 90° Rough EM (Metric)

  • Ø8-25mm (T-Adaption)
  • 4, 5, & 6 Flute, 45° Helix
  • 4 Flute Center-cutting
  • 5 & 6 Flute Non-Center-Cutting
  • Serrated edges aid with chip evacuation and accelerated feed rates
  • Corner: chamfer options

Chip-Surfer
47_RN & 48_RN - 90° Roughing End Mill

  • Ø.312-1.000" (T-Adaption)
  • 4, 5, & 6 Flute, 45° Helix
  • 4 Flute Center-cutting
  • 5 & 6 Flute Non-Center-Cutting
  • Serrated edges aids with chip evacuation and accelerated feed rates
  • Corner: chamfer & radius options

Chip-Surfer
47_RQ - 90° Variable Pitch EM (Metric)

  • Ø8-32mm (T-Adaption)
  • 4 Flute, 38° Helix
  • Center-cutting
  • Unequal spacing between flutes to diffuse vibration
  • Corner: Sharp, Chamfer & Radius options

Chip-Surfer
47_RQ - 90° Variable Pitch End Mill Tip

  • Ø.312-1.000" (T-Adaption)
  • 4 & 5 Flute, 38° Helix
  • Center-cutting
  • Unequal spacing between flutes to diffuse vibration
  • Corner: Sharp, Chamfer & Radius options

Chip-Surfer
47_RU - 90° Rough-Fin EM (Metric)

  • Ø8-25mm (T-Adaption)
  • 4 Flute, 45° Helix
  • Center-cutting
  • 2 serrated edges & 2 smooth edges to diffuse vibration
  • Corner: chamfers

Chip-Surfer
47_RU - 90° Rough-Fin End Mill Tip

  • Ø.312-1.000" (T-Adaption)
  • 4 Flute, 45° Helix
  • Center-cutting
  • 2 serrated edges & 2 smooth edges to diffuse vibration
  • Corner: chamfer & radius options

Chip-Surfer
47B_T_RB - Ball Nose; Helical

  • Ø.312-1.000" (T-Adaption)
  • 4 Flute, 30° Helix, .7xD Flute
  • 2 Center-cutting flutes

Chip-Surfer
47B_T_RB - Ball Nose; Helical (1.3xD Flute)

  • Ø.312-1.000" (T-Adaption)
  • 4 Flute, 30° Helix, 1.3xD Flute
  • 2 Center-cutting flutes

Chip-Surfer
47B_T_RB - Ball Nose; Helical (Metric)

  • Ø8-25 mm (T-Adaption)
  • 4 Flute, 30° Helix
  • 2 Center-cutting flutes

Chip-Surfer
47B_T_RM - Roughing Ball Nose; Helical

  • Ø.500-1.000" (T-Adaption)
  • 4 Flute, 35° Helix, .7xD Flute
  • Variable Pitch, Progressive Chip Splitters
  • 2 Center-cutting flutes

Chip-Surfer
47C 48C - 90° EM (1.5xD Flute) (Metric)

  • Ø8-25 mm (T-Adaption)
  • 4, 5 & 6 Flute
  • 4 Flute Center Cutting
  • 5 & 6 Flute Non-Center-Cutting
  • 1.5xD Flute Length
  • Serrated edges aids with chip evacuation and accelerated feed rates
  • Chamfered Corners

Chip-Surfer
47C 48C - 90° Roughing EM (1.5xD Flute)

  • Ø.312-1.000" (T-Adaption)
  • 4, 5 & 6 Flute
  • 4 Flute Center Cutting
  • 5 & 6 Flute Non-Center-Cutting
  • 1.5xD Flute Length
  • Serrated edges aids with chip evacuation and accelerated feed rates
  • Chamfered Corners

Chip-Surfer
47C_RQ1 - 90° Var. Pitch EM for Hi-Temps (Metric)

  • Ø8-25mm (T-Adaption)
  • 5 Flute, 35°-41° Helix
  • Unequal spacing between flutes to diffuse vibration
  • Corner: Chamfer options
  • Ideal for Inconel & Hi-Temp Alloys

Chip-Surfer
47D_RQ - 90° Var. Pitch EM (1.5xD Flute)

  • Ø.312-1.000" (T-Adaption)
  • 4 Flute, 1.5xD Flute Length
  • Variable Pitch
  • Center Cutting
  • Corner: .015" & .031"R

Chip-Surfer
47D_RQ - 90° Variable Pitch Tip for SS & Hi-Temps

  • Ø.750-1.250" (T-Adaption)
  • 5 Flute, 36°-38° Helix
  • Center-cutting
  • Corners: .030" .060" .090" .120" .190" .250" .375" R

Chip-Surfer
47N & 48N - Chamfer & Countersink Tip

  • Ø1.95 mm min. (T-Adaption)
  • 4 & 6 Flute
  • 30°, 45°, 49° & 60° Cutting Edge Angle options
  • 120°, 90°, 82° & 60° Included Angle options
  • Non-center cutting

Chip-Surfer
47R - Corner Round Tip

  • Ø.12" min. (T-Adaption)
  • Corners: .031" .062" .093" .125" .187" .250" .312" & .375" R
  • 4 Flute

Chip-Surfer
48_ & 49_ - 90° End Mill Tip

  • Ø.312-1.000" (T-Adaption)
  • 6, 8, & 10 Flute, 30 or 45° Helix
  • Non-Center Cutting
  • Corner: Sharp, .015", .031", .062", .125"R

Chip-Surfer
48A_T_RA - Hi-Feed, Positive

  • .500-1.000" (T-Adaption)
  • 6 Flute, positive geometry
  • Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
48A_T_RA - Hi-Feed, Positive (Metric)

  • Ø10-25 mm (T-Adaption)
  • 6 Flute, positive geometry
  • Coolant is ported through the center
  • Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
48D - 90° Finish EM (1.5xD Flute)(Metric)

  • Ø8-25 (T-Adaption)
  • 7 & 9 Flute, Different Helix & Variable Pitch
  • 1.5xD Flute Length
  • Non-Center Cutting
  • Corner: 0.5 0.8 & 1.0 mm R
  • Ideal for finishing!

Chip-Surfer
49D - 90° Finishing EM (1.5xD Flute)

  • Ø.312-1.000" (T-Adaption)
  • 7 & 9 Flute, Different Helix & Variable Pitch
  • 1.5xD Flute Length
  • Non-Center Cutting
  • Corner: .015" & .031"R
  • Ideal for finishing!

Chip-Surfer
4RJ - End Mill Rod

  • Ø.315-1.001" (T-Adaption)
  • Grades: IN04S, IN05S & IN06S

HiPos-Micro
12J1D - 90° & Hi-Feed End MIll

  • Ø.375-.750" (T-Adaption)
  • .22" Depth of cut
  • 6 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the integrated wiper (WEP)
  • Insert corners: SC, .008", .015", .031", .062" R & Hi-Feed

HiPosProB
12L8J - Indexable Circle Segment - ChipSurfer

  • Ø0.625-1.000" (ChipSurfer)
  • 9 mm Insert with 2 indexes
  • Insert Form Radii: 20mm, 30mm (*)

Pro-Ball
1BW7 - Modular Ball Nose

  • Ø.500-1.000” (T-Adaption)
  • Roughing Ball Nose End Mill, 2 Effective
  • Insert with 2 indexes
  • Max. depth of cut: Full Radius
  • Insert corners: .250", .375", .500" R

Gold-Max 4
1SJ1Y- 90° Modular End Mill

  • Ø.750"-1.000" (T-Adaption)
  • .31" Depth of Cut
  • Insert Corner: .015" .031", .062" R
  • Insert With 4 Indexes

DiPosFeed
1TG1B Modular Hi-Feed End Mill

  • Ø.394-1.00" (T-Adaption)
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!

DiPosFeed
1TG1B Modular Hi-Feed End Mill (Metric)

  • Ø10 mm - 25 mm (T-Adaption)
  • 4 mm IC Insert with 4 indexes
  • .5 mm (.020") Max. depth of cut
  • Two different insert edge preparations provide application flexibility
  • Excellent high feed performance & economy!

DiPosFeed
1TG1F - Modular Hi Feed End Mill

  • Ø.62-1.00" (T-Adaption)
  • 6 mm IC Insert with 4 indexes
  • .040" Max. depth of cut
  • Three different insert edge preparations provide application flexibility
  • Excellent high-feed performance & economy

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

  • Ø.500-1.000" (T-Adaption)
  • 4mm Insert with 4 indexes
  • 90°: .14" DOC, Hi-Feed: .019" DOC
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .008" .015" .031" R & Hi-Feed

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

  • Ø.500-1.000" (T-Adaption)
  • 90°: .18" DOC, Hi-Feed: .02" DOC
  • 5 mm Insert with 2 indexes
  • Insert corners: .008" .015" .031" .062" R & Hi-Feed
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed EM

  • Ø.625-1.000" (T-Adaption)
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed (Metric)

  • Ø16-25mm (T-Adaption)
  • 6 mm Insert with 4 indexes
  • 6mm Depth of cut
  • Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
1TV1D - Modular Backdraft End Mill

  • Ø.625-1.000" (T-Adaption)
  • 6 mm Insert with 4 indexes
  • Backdraft with single point diameter contact lowers radial forces, ideal for long reach side wall finishing
  • Insert corners: .015", .031", .047", .062" & .079" R
Find us on Facebook
View us on Youtube