Log In
Careers About Us
Ingersoll Logo Ingersoll Logo
  • Products
    • Indexable Milling

      Indexable Milling

      • Face Mills

        Face Mills

      • End Mills

        End Mills

      • Milling Inserts

        Inserts

      • Slotters

        Slotters

      • Plunge Mills

        Plunge Mills

      • All Indexable Milling

        All Indexable Milling

    • Solid Milling

      Solid Milling

      • Solid

        Solid

      • Modular

        Modular

      • All Solid Milling

        All Solid Milling

    • Boring & Reaming

      Boring & Reaming

      • Precision Boring

        Precision Boring

      • Reamers

        Reamers

      • All Boring & Reaming

        All Boring & Reaming

    • Holemaking Tools

      Holemaking Tools

      • Counterbore Tools

        Counterbore Tools

      • Deep Hole

        Deep Hole

      • Drilling

        Drilling

      • Spotting Engraving

        Spotting/Engraving

      • All Holemaking

        All Holemaking

    • Parting & Grooving

      Parting & Grooving

      • Holders

        Holders

      • Inserts

        Inserts

      • Adapters

        Adapters

      • Micro Tools

        Micro Tools

      • All Parting & Grooving

        All Parting & Grooving

    • Threading

      Threading

      • Thread Milling

        Thread Milling

      • Thread Turning

        Thread Turning

      • All Threading

        All Threading

    • Tool Holding

      Tool Holding

      • Coolant Driven Spindles

        Coolant Driven Spindles

      • Toolholders

        Toolholders

      • Modular Toolholders

        Modular Toolholders

      • ITTEDI

        IT.TE.DI. Holders

      • All Tool Holding

        All Tool Holding

    • Turning

      Turning

      • Turning Holders

        Turning Holders

      • Turning Boring Bars

        Turning Boring Bars

      • Turning Inserts

        Turning Inserts

      • Micro Tools

        Micro Tools

      • Multi-Function Tools

        Multi-Function Tools

      • All Turning

        All Turning

    • Tool Storage

      Tool Storage

      • Matrix Mini

        Matrix Mini

      • Matrix Maxi

        Matrix Maxi

  • Events
    • Big Cutter Seminars
    • Live Seminars
    • Trade Shows
  • Resources
    • Catalogs
    • Product Lines (ePips)
    • Industry Solutions
    • Ingersoll TV
    • Qwik-Cuts Newsletters
    • Product Announcements (PDFs)
    • References & Grades
      • Milling Insert Grades
      • Holemaking Insert Grades
      • Chipbreaker Cross References
      • Turning Grades Cross References
      • Turning Insert Master
      • Turn Line New Grades (PDF)
  • About Us
    • Our Profile
    • Photos
    • Our History
    • Careers
    • Ingersoll Germany
  • Contact Us
    • Tech Support
    • Customer Service
    • Address:
      Ingersoll Cutting Tools
      845 S. Lyford Rd.
      Rockford, IL 61108

    • Phone & Email
      Tel: 815-387-6600
      Email: info@ingersoll-imc.com
      Fax: 815-387-6337

Ingersoll Logo Ingersoll Logo
  • Products
    • Indexable Milling
      • View All Indexable Milling Products...
      • Indexable Milling
      • milling facemill

        Face Mills

        milling endmill

        End Mills

        Milling Inserts

        Inserts


        plungemill

        Plunge Mills

        slotter

        Slotters

    • Solid Milling
      • View All Solid Milling Tools...
      • Solid Milling
      • solid carbide end mill

        Solid

        modular

        Modular

    • Boring & Reaming
      • View All Boring & Reaming Products...
      • Boring & Reaming Tools
      • precision boring

        Precision Boring

        reamers

        Reamers

    • Holemaking
      • View All Holemaking Tools...
      • Holemaking Tools
      • counterbore tools

        Counterbore Tools

        Deep Hole

        Deep Hole


        Drilling

        Drilling

        Spotting Engraving

        Spotting/Engraving

    • Parting & Grooving
      • View All Parting & Grooving Products...
      • Parting & Grooving
      • Holders

        Holders

        Inserts

        Inserts


        Adapters

        Adapters

        Micro Tools

        Micro Tools

    • Threading
      • View All Threading Tools...
      • Threading Tools
      • Thread Milling

        Thread Milling

        Thread Turning

        Thread Turning

    • Tool Holding
      • View All Tool Holders...
      • Tool Holders
      • Coolant Driven Spindles

        Coolant Driven Spindles

        Toolholders

        Toolholders


        Modular Toolholders

        Modular Toolholders

        ITTEDI

        IT.TE.DI. Holders

    • Turning Tools & Inserts
      • View All Turning Products...
      • Turning Tools and Inserts
      • Turning Holders

        Turning Holders

        Boring Bars

        Boring Bars

        Inserts

        Inserts


        Micro Tools

        Micro Tools

        Multi-Function

        Multi-Function

    • Tool Storage
      • View All Matrix Tool Storage...
      • Matrix Tool Storage
      • Matrix Maxi

        Matrix Maxi

        Matrix Mini

        Matrix Mini

    • Product Announcements
  • Resources
    • Product Resources Product Lines (ePIPs), Industries
    • Media Catalog & Product PDFs, IngersollTV
    • Milling & HolemakingInsert Grades, Threading Advisor
    • Turning ReferencesInsert Guide, Grade Info
    • Qwik-CutsView Qwik-Cuts Newsletters
    Milling ISO Cross Reference

    Milling
    Insert Grades

    Searchable Guide

    Holemaking ISO Cross Reference

    Holemaking
    Insert Grades

    Searchable Guide

    Rapid Thread Advisor

    RapidThread
    Advisor

    Select the Correct Tool

    Insert Master Guide

    Turning
    Insert Master

    Insert Guide

    cross-ref

    Turn Line
    Chipbreaker

    Cross References

    iso-cross-ref

    Turning
    Grades

    Cross References

    new-grades

    Turn Grades
    & Chipbreaker

    Insert Info

    Catalogs

    Catalogs

    View & Download Product Catalogs

    Ingersoll TV

    Ingersoll TV

    See Our Tools in Action!

    Product Lines

    Product Lines

    View All of Our Tooling Options

    Industry Solutions

    Industries

    Learn About our Industry Solutions

    Our Most Recent Qwik-Cuts

    Qwik-Cut Feb 5 2021

    Feb 5, 2021

    Promo... Catalog... Scorching Feeds & Speeds!

    Qwik-Cut Jan 8 2021

    Jan 8, 2021

    SFeedUP: Ingersoll Tools at ExTREME Speeds & Feeds

    Qwik-Cut Oct 1 2020

    Oct 1, 2020

    Digital Fine Boring Heads Now IP69K Rated Against Dust & Coolant

    Qwik-Cut Aug-13 2020

    Aug 13, 2020

    Turning Solutions for Swiss-Type and Finish-Bore

    Qwik-Cut Jul 30 2020

    Jul 30, 2020

    Economical 2-Sided Inserts & Maximum Roughing Productivity

     

    View All Qwik-Cuts

  • Events
    • Seminars Attend a live or mobile seminar
    • The BIG CutterFind out where the Big Cutters are
    • Trade Shows Find out where we'll be next

    Big Cutter One - Next Stop

    Big Cutter


    ,

    Big Cutter Two - Next Stop

    Big Cutter


    ,

     

    Visit the Big Cutter Page

    Live Seminars

    Live
    Seminars

    View our Schedule

    The Big Cutter Mobile Seminar

    Mobile
    Seminars

    View our Schedule

    View the Trade Show Page...

    Our Upcoming Trade Shows

    Show Name Dates Location Website
    Houstex Trade Show (SME) February 26-28, 2019 Houston, TX
    ISA Convention April 6-9, 2019 Houston, TXD
    Amerimold Trade Show June 12-13, 2019 Rosemont, IL
    Wisconsin Manufacturing & Tech Show October 8-10, 2019 Milwaukee, WI
    Motion + Power Technology Expo (Gear Expo) October 15-17, 2019 Detroit, MI
    South-Tec October 22-24, 2019 Greenville, SC
  • Contact Us

    Address:

    Ingersoll Cutting Tools
    845 S. Lyford Rd.
    Rockford, Illinois 61108

    Phone or E-Mail:

    - 815-387-6600
    - info@ingersoll-imc.com

    Tech Support

    Tech
    Support

    For Technical Questions

    Customer Service

    Customer
    Service

    Get General Assistance

  • Log In
Home > Milling > Indexable Milling > Indexable Mills > Face Mills > 90°

Filter Your Results

Applications

Cutting Dia.

Cutting Dia. Max.

Hand of Rotation

Adaption Machine Side

Coolant

Eff. Teeth / Flutes

Depth of Cut Max.

Product Family



Photo of HiPos-Plus

HiPos-Plus
2J1G - 90° Face Mill

  • Ø2.00-8.00"
  • .63" Depth of cut
  • 17 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .093", .125", .156", .187", .250" R
Photo of HiPos-Plus

HiPos-Plus
2J1G - 90° Face Mill (Metric)

  • Ø40-160 mm
  • 16 mm Depth of cut
  • 17 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.0, 1.6, 2.4, 3.2, 4.0, 4.8, 6.4 mm R
Photo of HiPos-Plus

HiPos-Plus
2J1P - 90° Face Mill

  • Ø1.50-3.00"
  • .35" Depth of cut
  • 9 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .078", .120" R
Photo of HiPos-Plus

HiPos-Plus
2J1P - 90° Face Mill (Metric)

  • Ø32-100 mm
  • 9 mm Depth of cut
  • 9 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6, 2.0 & 3.1 mm R
Photo of HiPos-Plus

HiPos-Plus
2J1R - 90° Face Mill

  • Ø2.00-5.00"
  • .47" Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .078", .093", .125", .156" R
Photo of HiPos-Plus

HiPos-Plus
2J1R - 90° Face Mill (Metric)

  • Ø35-125 mm
  • 12 mm Depth of cut
  • 13 mm Insert with 2 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6, 2.0, 2.4 3.1 & 4.0 mm R
Photo of HiPos-Plus

HiPos-Plus
4W2A - 90° Cartridge Face Mill

  • Ø8.00-12.00"
  • .66" Depth of cut
  • 18 mm Insert with 2 indexes
  • Cartridge pocket protection (sold separately)
Photo of Aluminator

Aluminator
5H6G - 90° Finish Face Mill for Aluminum

  • Ø2.00-6.00"
  • .41" Depth of cut
  • 11 mm Insert
  • Insert with 4 indexes
  • 15-32 Ra surface finishes when engaging wiper (WEP)
  • Insert corners: .008", .020", .031", .062", .093", .125" R
Photo of Iron-Eater

Iron-Eater
5J2H - 90° SiNi Face Mill

  • Ø3.00-4.00"
  • Quad depth of cut: .24"
  • Octo depth of cut: .15"
  • Wedge held inserts
  • Pre-balanced
Photo of Gold-Quad

Gold-Quad
5J5P - 90° Face Mill

  • Ø2.00-4.00"
  • .45" Depth of cut
  • 13 mm Insert with 4 indexes
  • Finishes as good as 40 Ra
  • Insert corners: .031, .047, .062, .093, .125"
Photo of Gold-Quad

Gold-Quad
5J5P-R - 90° Face Mill for .25"R

  • Ø2.00-4.00"
  • .45" Depth of cut
  • 13 mm Insert with 2 indexes
  • Finishes as good as 40 Ra
  • Insert Corner: .250"
Photo of Rough-Air

Rough-Air
5X6W - 90° Router Face Mill for Aluminum

  • Ø2.00-6.00"
  • .61" Depth of cut
  • 14 mm Insert with 2 indexes
  • Pre-Balanced to G6.3 at 20,000 RPM
  • Finishes as good as 15 Ra
  • Insert corners: .020", .031", .062", .093", .125" R
Photo of Rough-Air

Rough-Air
5X6X - 90° Router Face Mill for Aluminum

  • Ø2.00-4.00"
  • 25 mm Insert with 2 indexes
  • .82" Depth of cut
  • Pre-Balanced to G6.3 at 20,000 RPM
  • Finishes as good as 15 Ra
  • Insert Corners: .031", .062", .093", .125" R
Photo of Rough-Air

Rough-Air
5X6Z (33 mm Insert)

  • 90° High Speed Aluminum Router Face Mill
  • .99" Max. Depth of Cut
  • Insert with 2 Indexes
Photo of HiPos-Alu

HiPos-Alu
AX2K - 90° Router Face Mill for Aluminum

  • Ø2.00-6.00"
  • 16 mm Insert with 2 Indexes
  • .63" Depth of cut
  • Pre-Balanced to G6.3 at 20,000 RPM
  • Finishes as good as 15 Ra
  • Insert Corners: .015", .031", .062", .094", .125", .197" R
Photo of HiPos-Alu

HiPos-Alu
AX2Q - 90° Router Face Mill for Aluminum

  • Ø2.00-6.00"
  • 22 mm Insert with 2 indexes
  • .83" Depth of cut
  • Pre-Balanced to G6.3 at 20,000 RPM
  • Finishes as good as 15 Ra
  • Insert corners: .020", .031", .062", .118", .197", .250" R
Photo of Quad-Plus Finish

Quad-Plus Finish
DJ1H - 90° Adjustable Finishing Face Mill

  • Ø2.00-8.00"
  • .040" Max. depth of cut (.020" recommended)
  • 12 mm Insert with up to 8 indexes
  • Easy & accurate adjustment within .0002"
  • 5-20 Ra surface finish capability
Photo of DiPosQuad

DiPosQuad
DJ5E - 90° Rough & Finish FM (Metric)

  • Ø32-50mm
  • 5mm Depth of cut
  • 7mm Insert with 8 indexes
  • 15-32 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .031" R
Photo of DiPosQuad

DiPosQuad
DJ5E, DJ6E - 90° Rough & Finish Face Mill

  • Ø1.50-4.00"
  • .19" Depth of cut
  • 7mm Insert with 8 indexes
  • 15-32 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .031" R
Photo of DiPos-Trio

DiPos-Trio
DJ5F, DJ6F - 90° Rough & Finish Face Mill

  • Ø2.00-4.00"
  • .244" Depth of cut
  • 9 mm Insert with 6 indexes
  • 20-32 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .020", .031", .039", .062" R
Photo of DiPosQuad

DiPosQuad
DJ5G, DJ6G - 90° Face Mill

  • Ø2.00-6.00"
  • .33" Depth of cut
  • 12mm Insert with 8 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .031" R
Photo of DiPos-Trio

DiPos-Trio
DJ5P, DJ6P - 90° Rough & Finish Face Mill

  • Ø2.00-6.00"
  • .36" Depth of cut
  • 13 mm Insert with 6 indexes
  • 20-32 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062" R
Photo of ISO-Plus

ISO-Plus
DJ5T, DJ6T - 90° Face Mill

  • Ø2.00-8.00"
  • 13 mm Insert with 8 indexes
  • .24" Depth of cut at 90°
  • 40-80 Ra surface finishes when engaging the wiper (WEP)
  • Carbide and SiN insert options
  • Insert corners: .015, .031, .047, .062"
Photo of ISO-Plus

ISO-Plus
DL5T, DL6T - 85° Roughing Face Mill

  • Ø2.00-6.00"
  • .49" Depth of cut
  • 13 mm Insert with 8 indexes
  • Finishes as good as 100 Ra
  • Carbide & SiN options
  • Great Price-per-Index economy!
  • Insert Corner: .015", .031", .047, .062" R.
Photo of HiPos-Trio

HiPos-Trio
KJ5D, KJ6D - 90° Face Mill

  • Ø1.50-3.00"
  • .27" Depth of cut
  • 6 mm Insert with 3 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062" R
Photo of HiPos-Trio

HiPos-Trio
KJ5D, KJ6D - 90° Face Mill (Metric)

  • Ø35-63mm
  • 7mm Depth of cut
  • 6 mm Insert with 3 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8 & 1.6mm R
Photo of HiPos-Trio

HiPos-Trio
KJ5G, KJ6G - 90° Face Mill

  • Ø1.50-5.00"
  • .41" Depth of cut
  • 10 mm Insert with 3 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .094" R
Photo of HiPos-Trio

HiPos-Trio
KJ5G, KJ6G - 90° Face Mill (Metric)

  • Ø50-125mm
  • 11mm Depth of cut
  • 10 mm Insert with 3 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.4, 0.8, 1.6 & 2.4mm R
Photo of HiPos-Trio

HiPos-Trio
KJ5P, KJ6P - 90° Face Mill

  • Ø2.00-6.50"
  • .57" Depth of cut
  • 13 mm Insert with 3 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .094", .125" R
Photo of HiPos-Trio

HiPos-Trio
KJ5P, KJ6P - 90° Face Mill (Metric)

  • Ø63-160mm
  • 15mm Depth of cut
  • 13mm Insert with 3 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: 0.8, 1.6, 2.4 & 3.2mm R
Photo of Gold-Max 4

Gold-Max 4
SJ2J - 90° Heavy Duty Face Mill

  • Ø5.00-8.00"
  • .54" Max. depth of cut
  • Insert with 4 indexes
  • Replaceable steel seating pads ensure maximum cutter body life
Photo of S-Max

S-Max
SJ2N, SJ6N - 90° Heavy Duty Face Mill

  • Ø4.00-12.00"
  • .68" Max. depth of cut
  • Insert with 4 indexes
  • 2 Different steel seating pads accomodate both general purpose and heavy duty inserts
  • SJ2N offers pocket protection
Photo of Gold-Max 4

Gold-Max 4
SJ5J, SJ6J - 90° Face Mill

  • Ø3.00-4.00"
  • .54" Max. depth of cut
  • 14.5 mm Insert with 4 indexes
  • SJ5 High-density
  • SJ6 Medium-density
Photo of Gold-Max 4

Gold-Max 4
SJ5Y, SJ6Y- 90° Face Mill

  • Ø1.50-2.50"
  • .31" Max. depth of cut
  • 8.4 mm insert with 4 indexes
  • Insert corners: .015", .031", .062" R
  • High-density
Photo of Gold-Max 4

Gold-Max 4
SJ6F, SJ5F- 90° Face Mill

  • Ø2.00-5.00"
  • .42" Max. depth of cut
  • 11 mm Insert with 4 indexes
  • Insert corners: .031", .062", .093", .125" R
  • Medium-density
Photo of DiPosFinishT

DiPosFinishT
TA3Q - Fixed Pocket Finish Face Mill

  • Ø2.00-6.00"
  • 12 mm Insert with up to 4 indexes
  • .020" Max. depth of cut (.012" Min. depth of cut)
  • Non-adjusting design reduces set up time
  • Long crowned wiper produces 3-15 Ra surface finish
  • Stepped insert orientation alleviates axial & radial forces
  • Can mill up to 90° shoulder
  • Carbide, CBN & PCD insert offering for a wide variety of materials
Photo of DiPos-Tetra

DiPos-Tetra
TJ1C - 90° & Hi-Feed Face Mill

  • Ø1.50-2.00"
  • 90°: .18" DOC, Hi-Feed: .02" DOC
  • 5 mm Insert with 2 indexes
  • Insert corners: .008" .015" .031" .062" R & Hi-Feed
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress
Photo of DiPosDuo

DiPosDuo
TJ1D - 90° Backdraft & Hi-Feed FM

  • Ø1.50-3.00"
  • 6 mm Insert with 4 indexes
  • .24" Depth of cut
  • Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
TJ1D - 90° B-Draft & Hi-Feed (Metric)

  • Ø32-63mm
  • 6 mm Insert with 4 indexes
  • 6mm Depth of cut
  • Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
  • Backdraft insert option to reduce vibration for long reach applications
Photo of DiPosDuo

DiPosDuo
TJ5F - 90° & Hi-Feed FM (Metric)

  • Ø40-80mm
  • 9mm Insert with 4 indexes
  • 90°: 8mm DOC, Hi-Feed: 1.5mm DOC
  • Insert corners: 0.4, 0.8, 1.6mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

  • Ø2.00-4.00"
  • 11mm Insert with 4 indexes
  • 90°: .41" DOC, Hi-Feed: .078" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed FM (Metric)

  • Ø40-100mm
  • 11mm Insert with 4 indexes
  • 90°: 10.5mm DOC, Hi-Feed: 2.0mm DOC
  • Insert corners: 0.8mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

  • Ø2.00-4.00"
  • 14mm Insert with 4 indexes
  • 90°: .54" DOC, Hi-Feed: .118" DOC
  • Insert corners: .031" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPosDuo

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed FM (Metric)

  • Ø50-125mm
  • 14mm Insert with 4 indexes
  • 90°: 13.8mm DOC, Hi-Feed: 3.0mm DOC
  • Insert corners: 0.8mm R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of DiPos-Tetra

DiPos-Tetra
TJ5N, TJ6N - 90° Face Mill

  • Ø2.00-8.00"
  • .59" Depth of cut
  • 16 mm Insert with 4 Indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062", .094" R
Photo of DiPos-Tetra

DiPos-Tetra
TJ5Q, TJ6Q - 90° Face Mill

  • Ø2.00-4.00"
  • .43" Depth of cut
  • 12 mm Insert with 4 indexes
  • 32-63 Ra surface finishes when engaging the wiper (WEP)
  • Insert corners: .015", .031", .062" R
Photo of DiPosDuo

DiPosDuo
TJ6F - 90° & Hi-Feed Face Mill

  • Ø1.50-4.00"
  • 9mm Insert with 4 indexes
  • 90°: .32" DOC, Hi-Feed: .059" DOC
  • Insert corners: .015" .031" 062" R & Hi-Feed
  • 32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Photo of Gold-Max 8

Gold-Max 8
VJ6K - 90° Face Mill

  • Ø2.00-8.00"
  • .36" Max. depth of cut
  • Insert with 8 indexes
Photo of V-Max

V-Max
VK5V - 90° Face Mill

  • Ø2.00-4.00" Hi-density
  • .46" Max. depth of cut (2RH/2LH)
  • .23" Max. depth of cut at 90° (4RH/4LH)
  • Inserts with up to 8 indexes (4RH/4LH)
  • Left & right hand cutter bodies
  • Insert radii: .031", .063", .125"
  • Insert chamfer: .031" x 45°
Photo of V-Max

V-Max
VK6V - 90° Face Mill

  • Ø2.00-4.00" Medium-density
  • .46" Max. depth of cut (2RH or 2LH)
  • .23" Max. depth of cut at 90° (4RH or 4LH)
  • Inserts with up to 8 indexes (4RH or 4LH)
  • Left & right hand cutter bodies
  • Insert corners: .031", .063", .125"R & .031" x 45°
Photo of DiPos-Trio

DiPos-Trio
WJ5F - 90° Rough & Ramp Face Mill

  • Ø2.00-4.00"
  • .22" Depth of cut
  • 6 mm Insert with 6 indexes
  • Finishes as good as 80 Ra
  • Insert radii: .015", .031"

Filter Your Results

Applications

Cutting Dia.

Cutting Dia. Max.

Hand of Rotation

Adaption Machine Side

Coolant

Eff. Teeth / Flutes

Depth of Cut Max.

Product Family

Find us on Facebook

Follow @Ingersoll_IMC

View us on Youtube

Sign up for our Qwik-Cuts Newsletter!

Milling

End Mills

Face Mills

Plunge Mills

Slot/T-Slot Mills

Holemaking

Counterbore Tools

Deep Hole

Drilling

Spotting/Engraving

Turning

Turning Inserts

Turning Holders

Turning Boring Bars

 

Parting & Grooving

Holders

Inserts

Adapters

Micro Tools

Tool Holders

Coolant Driven Spindles

Toolholders

Modular Toolholders

IT.TE.DI. Holders

Customer Support

Tech Support

Customer Service

RapidThread Advisor

Turning Insert Master


845 S. Lyford Road • Rockford, IL 61108 USA • 815-387-6600

Ingersoll Logo

© 2020 Ingersoll Cutting Tool Company - All Rights Reserved
Terms & Policies