EDP: 4508259 Part: ER25T12SA-05 Series: ER*T - Solid ER, Neck Relief
Representative image shown ⓘ
The image above is intended to represent the product series for illustrative purposes only. The actual product may vary.
View STEP
Available : 2
International: 44
Product Series Features:
- Solid ER in sizes 11, 16, 20, 25 & 32
- Chip Surfer Connection
- Neck Relief
- Coolant Options
Notes:
- When assembling, be sure carbide tip is seated firmly on shank with no gap.
- Tightening Torque: T05=60in/lbs - T06=90in/lbs - T08=130in/lbs - T10=250in/lbs - T12=250in/lbs - T15=350in/lbs
- No lubricant on adaption
- Wrenches sold seperately
Integral ER Collet Assembly Instructions
RIGHT WAY (4 steps below)
(Click image to enlarge)
1. Place the nut on the integral ER collet. Assemble the nut with the shank by mating the retention tabs with the ER groove.
(Click image to enlarge)
2. The nut/shank assembly is shown ready for installation.
(Click image to enlarge)
3. Place the nut/shank assembly into the holder and secure the nut.
(Click image to enlarge)
4. No gap.
WRONG WAY (4 steps below)
(Click image to enlarge)
1. Remove nut from ER holder.
(Click image to enlarge)
2. Place the integral ER collet into the collet chuck.
(Click image to enlarge)
3. Screw the nut on the holder.
(Click image to enlarge)
4. The nut will BIND up on the retention tabs prematurely, leaving a GAP. Applying extra force may BREAK THE NUT.
