Product Search

BDE

Form inserts with 2 indexes

Cartridges for Drills

Cartridges for Drills

CDE

78° Parallelogram inserts with 2 indexes

Clamps

Clamps

Coolant Accessories

Coolant Nozzles & Plugs

DNE314

80° Parallelogram Inserts
4 Indexes, 2 RH/2LH

DNE324

80° Parallelogram Inserts
4 Indexes, 2 RH/2LH

Driver Bits

Standard Driver Bit
Hex, Torx, and Torx Plus drive options
NOTE: Images shown are a representation of the product series only and may not be an actual representation of each specific product within the series

Driver Handles & Adapters

Driver Handles
Preset Torque Adapter Units
NOTE: Images shown are a representation of the product series only and may not be an actual representation of each specific product within the series

DXE

Parallelogram milling inserts

GYRO Guide Accessories

GYRO Guide Accessories

Handle Style Drivers

Wing, Flag, & Straight Style Drivers
Optional Accessory Item
Sold Separately
NOTE: Images shown are a representation of the product series only and may not be an actual representation of each specific product within the series

Hex Drive L-Keys

Hex Drive L-Keys

JPE

Parallelogram milling inserts

Levers

Levers

L-Nests

L-Nests

Lock Pins

Lock Pins

LPE324

Milling Insert

LPE434

Rectangular milling inserts

LSE Chamfer

Milling Insert

LXD323

Milling Insert

Milling Chuck Collet Extracting Tool

For removal of milling chuck collets
Optional Accessory Item

Punches

Punches

Seals & Plugs

Seals & Plugs

Seats for Milling

Seats & Anvils for Milling

Shim Pins

Shim Pins

Shims for Turning

Shims, Seats, Anvils

Snap Rings

Snap Rings

SXD

Square milling inserts

TB ELBOW FITTING

High Pressure Coolant Elbow Fitting
*See Notes Below

TB HOSE

High Pressure Coolant Hose

Torx Drive L-Keys

High Alloy chome-vanadium-molybdenum steel, hardened
Black Finish

Turning Holder Insert Reference

Wedge

Wedge

YCE

Rectangular finish milling inserts

3n1-Rounds
45D_RP - Hi-Feed End Mill

Ø.250-.750"
Cylindrical Shank
4 or 5 flutes, 38° Helix
Large corner radii
Chatter-free combo hi-feed variable pitch & chip splitter
Serrated cutting edge features flat peaks which leave a better surface finish when compared to competitors' roughing end mills
Provides the greatest advantage in cavity milling and heavy roughing cuts

3n1-Rounds
47DRP - Hi-Feed End Mill

Ø6-20 mm
Cylindrical Shank (Metric)
4 or 5 flutes, 38° Helix, large corner radii
Chatter-free combo high-feed variable pitch chipsplitter
Serrated cutting edge features flat peaks which leave a better surface finish when compared to competitors' roughing end mills
Provides the greatest advantage in cavity milling and heavy roughing cuts

Aluminator
15U1G - 90° Rough & Finish End Mill

Ø1.000-2.000"
Weldon Shank
11 mm Insert with 4 indexes
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008" .020" .031" .062" .093", .125" R
.41" Depth of cut

Aluminator
15U1G - 90° Rough & Finish End Mill

Ø1.000-1.500"
TopOn Connection
11 mm Insert with 4 indexes
Insert corners: .008" .020" .031" .062" .093", .125" R
15-32 Ra surface finishes when engaging wiper (WEP)
.41" Depth of cut

Aluminator
5H6G - 90° Rough & Finish Face Mill

Ø2.000-6.000"
11 mm Insert with 4 indexes
.41" Depth of Cut
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008", .020", .031", .062", .093", .125" R

Aluminator
5H6G - 90° Rough & Finish Face Mill (Metric)

Ø50.00 - 100.00 mm
11 mm Insert with 4 indexes
8.4 mm Depth of Cut
15-32 Ra surface finishes when engaging wiper (WEP)
Insert corners: .008", .020", .031", .062", .093", .125" R

Aluminator
SHET11 - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Wiper flats on face for producing 15-25 Ra surface finishes
4 Indexes

BTA Drill
BTA Center & Inner Cartridges

BTA Cartridges
Insert information for reference only.
Replacement cartridges include insert screw

BTA Drill
BTA Peripheral Cartridges

BTA Peripheral Cartridges

BTA Drill
BTA Peripheral Plus Cartridges

BTA Peripheral Plus Cartridges
Insert information for reference only.
Replacement cartridges include insert screw and adjustment screws

BTA Drill
BTA...CHA

BTA Brazed Adapter
Single tube cross hole adapter
Ø.437-2.559" (11.1-65.0 mm)

BTA Drill
BTA...DE4 - Brazed Head

Ø.725-2.559"
Double Tube System
External 4-Start Thread

BTA Drill
BTA...SE2 - Brazed Head

Ø.496-.787"
Single Tube System
External 2-Start Thread

BTA Drill
BTA...SE4 - Brazed Head

Ø.614-2.559"
Single Tube System
External 4-Start Thread

BTA Drill
BTAADP...SE2 - Brazed Head

Ø.496-.787"
Single Tube System - Cross Hole
External 2-Start Thread

BTA Drill
BTAADP...SE4 - Brazed Head

Ø.614-2.559"
Single Tube System - Cross Hole
External 4-Start Thread

BTA Drill
BTDI

BTA DTS Tubes - Inner
Ø.472-1.693"
Double Tube System Tubes - Inner

BTA Drill
BTDO

BTA DTS Tubes - Outer
Ø.709- 6.063"
Double tube system - outer

BTA Drill
BTS...SE2 - Brazed Head

Ø.496-.614"
Single Tube System
External 2-Start Thread

BTA Drill
BTSADP...SE1 - Brazed Head

Ø.315-.570"
Single Tube System - Cross Hole
External 1-Start Thread

BTA Drill
BTSADP...SE4 - Brazed Head

Ø.615-.787"
Single Tube System - Cross Hole
External 4-Start Thread

BTA Drill
BTSI

BTA STS Tubes
Internal Threads
Ø.433-8.898"
Single tube system
Internal Threads

BTA Drill
Guide Pad Protector

Protects Guide Pad at Entry/Exit

BTA Drill
Guide Pads - Filler

Guide Pad Pocket Filler

BTA Drill
NPHT-R-B

2 Cornered Insert for TBTA-H BTA Heads
General Purpose

BTA Drill
NPHT-R-G

2 Cornered Insert for TBTA-H BTA Heads
General Purpose

BTA Drill
NPMT-L-B

2 Cornered Insert for TBTA-H BTA Heads
General Purpose

BTA Drill
NPMT-L-G

2 Cornered Insert for TBTA-H BTA Heads
General Purpose

BTA Drill
NPMT-R-B

2 Cornered Insert for TBTA-H BTA Heads
General Purpose

BTA Drill
NPMT-R-G

2 Cornered Insert for TBTA-H BTA Heads
General Purpose

BTA Drill
NPMX-R-B

Parallelogram insert for BTA Heads
General Purpose

BTA Drill
Pad-DC Guide Pads

Solid Carbide
Double Chamfer
Smooth Entry/Exit
First Choice

BTA Drill
PAD-SC Guide Pads

Solid Carbide
Single Chamfer

BTA Drill
Plus Guide Pads - Solid Carbide

Plus Solid Carbide
Double Chamfer

BTA Drill
Sub Guide Pad

Stabalizes Drill Head in Bushing

BTA Drill
TBTA3...DE4 - 3 Cartridge System

Ø1.496-4.212"
Double Tube System
External 4-Start Thread

BTA Drill
TBTA3...SE4 - 3 Cartridge System

Ø1.496-4.212"
Single Tube System
External 4-Start Thread

BTA Drill
TBTA3...SI1 - 3 Cartridge System

Ø1.496-4.212"
Single Tube System
Internal Single-Start Thread

BTA Drill
TBTA5...DE4 - 5 Cartridge System

Ø4.213-6.653"
Double Tube System
External 4-Start Thread

BTA Drill
TBTA5...SE4 - 5 Cartridge System

Ø4.213-6.653"
Single Tube System
External 4-Start Thread

BTA Drill
TBTA5...SI1 - 5 Cartridge System

Ø4.213-6.653"
Single Tube System
Internal One-Start Thread

BTA Drill
TBTA7...SE4 - 7 Cartridge System

Ø6.654-9.173"
Single Tube System
External 4-Start Thread

BTA Drill
TBTA7...SI1 - 7 Cartridge System

Ø6,654-9.173"
Single Tube System
Internal One-Start Thread

BTA Drill
TBTA-H...DE4 - Indexable Head

Ø.984-2.259"
Double Tube System
External 4-Start Thread

BTA Drill
TBTA-H...SE4 - Indexable Head

Ø.984-3.504"
Single Tube System
External 4-Start Thread

BTA Drill
TBTA-H...SI1 - Indexable Head

Ø.984-3.504"
Single Tube System
Internal 1-Start Thread

BTA Drill
TBTA-T...SE4 - Indexable Trepanning System

Ø3.937-12.913" (100.00-328.00mm)
Single Tube System
External 4-Start Thread

BTA Drill
TPMX-L-DT

3 Cornered Insert for TBTA3,5 or 7, TBTA-R and TBTA-T BTA Heads
General Purpose

BTA Drill
TPMX-L-G

3 Cornered Insert for TBTA3,5 or 7, TBTA-R and TBTA-T BTA Heads
General Purpose

BTA Drill
TPMX-R-B

3 Cornered Insert for TBTA3,5 or 7, TBTA-R and TBTA-T BTA Heads
General Purpose

BTA Drill
TPMX-R-BG

3 Cornered Insert for TBTA3,5 or 7, TBTA-R and TBTA-T BTA Heads
General Purpose

BTA Drill
TPMX-R-DT

3 Cornered Insert for TBTA3,5 or 7, TBTA-R and TBTA-T BTA Heads
General Purpose

BTA Drill
TPMX-R-G

3 Cornered Insert for TBTA3,5 or 7, TBTA-R and TBTA-T BTA Heads
General Purpose

C-Adapter
C*AD*CAT

CAT V-Flange
C-Adapter (ISO 26623-2)
Quick Change Adapter

C-Adapter
C*AD*HSK

HSK (ISO 12164-3)
C-Adapter (ISO 26623-2)
Quick Change Adapter
HSK-WH is also referred to as HSK-T
Note: To enable clamping, coolant tube must be removed

C-Adapter
C_EX_C

C-Adapter (ISO 26623-1)
C-Adapter (ISO 26623-2)
Quick Change Extension
NOTE: Extensions do not have the Data Chip Provision slot

C-Adapter
C_RE_C

C-Adapter (ISO 26623-1)
C-Adapter (ISO 26623-2)
Quick Change Reducer
NOTE: Reducers do not have the Data Chip Provision slot

C-Adapter
C_-TCAHN - External Modular Holder

C-Adapter (ISO 26623-1)
Quick Change Parallel Holder
T-Clamp Modular Connection
C4-C6
Coolant Thru

C-Adapter
C_-TCAHPN - External Modular Holder

C-Adapter (ISO 26623-1)
Quick Change Perpendicular Holder
T-Clamp Modular Connection
C4-C6
Coolant Thru

C-Adapter
C_-TCHN - External Modular Holder

C-Adapter (ISO 26623-1)
Quick Change Parallel Holders
Accepts T-Clamp Ultra+ Adapter
C4-C6
Coolant Thru

C-Adapter
C_-TCHPN - External Modular Holder

C-Adapter (ISO 26623-1)
Quick Change Perpendicular Holders
Accepts T-Clamp Ultra+ Adapter
C4-C6
Coolant Thru

C-Adapter CoolBurst
C_-TCAHN-TB - External Modular Holder

C-Adapter (ISO 26623-1)
Quick Change Parallel Holder
T-Clamp Modular Connection
C4-C6
High Pressure Coolant

C-Adapter CoolBurst
C_-TCAHPN-TB - External Modular Holder

C-Adapter (ISO 26623-1)
Quick Change Perpendicular Holder
T-Clamp Modular Connection
C4-C6
High Pressure Coolant

CeraSFeed
1ZG3D - Hi-Feed Ceramic End Mill

Ø.625-1.250
Cylindrical Shank
6 mm IC Insert, double sided inserts
4 Cutting edge insert, 4 indexes
.039" Max. depth of cut
Strong secure clamping
Excellent high-feed performance & economy!

CeraSFeed
1ZG3D - Hi-Feed Ceramic End Mill - ChipSurfer

Ø.625-1.000”
Chip Surfer Connection
6 mm IC Insert, double sided
4 Cutting edge insert, 4 indexes
.039" Max. depth of cut
Strong secure clamping
Excellent hi-feed performance & economy!

CeraSFeed
1ZG3D - Hi-Feed Ceramic End Mill - Top On

Ø.625-1.250”
TopOn Connection
6 mm IC Insert, double sided
4 Cutting edge insert, 4 indexes
.039" Max. depth of cut
Strong secure clamping
Excellent hi-feed performance & economy!

CeraSFeed
1ZG3F - Hi-Feed Ceramic End Mill

Ø1.000-1.500
Cylindrical Shank
9 mm IC Insert, double sided inserts
4 Cutting edge insert, 4 indexes
.060" Max. depth of cut
Strong secure clamping
Excellent high-feed performance & economy!

CeraSFeed
DG1H*R01, DG2H*R01 - Hi-Feed Face Mill

Ø2.000-3.000"
12 mm IC insert with 6 indexes
.098” Max. depth of cut
Strong secure wedge clamp system
Excellent hi-feed performance & economy!

CeraSFeed
TNXN1207N0104, 12 mm IC Ceramic Hi-Feed Insert

Ceramic Hi-Feed Insert
Ideal for high feed milling of difficult-to-cut materials
6 Indexes

Chase-Octo
5N2L Face Mill

43° Lead Face Mill
7 mm Wedge held insert
.19" Max. depth of cut
Compatable with octo and button insert styles

Chase-Quad
15N1H - 45° End Mill

Ø1.00" Min. (Weldon)
45° Cutting Edge Angle
12mm Insert with 4 indexes

Chase-Quad
5N2H_R00 - 45° Face Mill

Ø2.00-8.00"
.23" Depth of cut
12mm Insert with 4 indexes
32-63 Ra surface finishes

Chip-Surfer
16N_K - Front & Back Chamfer Tip

Ø.697"
Chip Surfer Connection
3 Flute
45° Front & Back Chamfer

Chip-Surfer
16R - Full Radius T-Slitter

Ø15.7-17.7 mm
Chip Surfer Connection
2.2-3.00 mm width of slot range
3 Flute
Positive radial and neutral axial rake geometry
Ideal for O-Ring grooves

Chip-Surfer
16T_K - Multi-Purpose T-Slitter

Ø15.7-17.7 mm
Chip Surfer Connection
3 Flute Slitter
1.5-3.17 mm width of slot range
Positive radial and neutral axial rake geometry
Ideal for steels & iron

Chip-Surfer
16T_P - T-Slitter w/ Keen Edge

Ø15.7 mm
Chip Surfer Connection
3 Flute Slitter
1.5-3.00 mm width of slot range
Positive radial and neutral axial rake geometry
Ideal for soft & gummy materials

Chip-Surfer
17N - Extended Neck Front & Back Chamfer Tip

Ø7.7mm
Chip Surfer Connection
4 Flute
45° Front & Back Chamfer

Chip-Surfer
17N_P - Front/Back Chamfer, Keen Edge

Ø.854"
Chip Surfer Connection
4 Flute
45° Front & Back Chamfer
For soft and gummy materials

Chip-Surfer
17R - Full Radius T-Slitter

Ø21.7 mm
Chip Surfer Connection
4.0-6.0 mm width of slot range
4 Flute
Positive radial and neutral axial rake geometry
Ideal for O-ring grooves

Chip-Surfer
17T - Extended Neck T-Slitter

Ø7.7 mm
Chip Surfer Connection
4 Flute Slitter
0.70-2.00 mm width of slot range
Positive radial & neutral axial rake geometry

Chip-Surfer
17T_K - Multi-Purpose T-Slotter

Ø21.7 mm
Chip Surfer Connection
4 Flute Stagger Tooth Slotter
0.76-5.25 mm width of slot range
Positive radial and positive axial rake geometry
Ideal for steels & iron

Chip-Surfer
17T_P - T-Slotter w/ Keen Edge

Ø21.7 mm
Chip Surfer Connection
4 Flute Stagger Tooth Slotter
1.00-4.00 mm width of slot range
Positive radial and positive axial rake geometry
Ideal for soft & gummy materials

Chip-Surfer
18F - 90° Face Mill Tip

Ø12-25 mm
Chip Surfer Connection
6 Flute
.3xD Flute Length
Non-Center Cutting
Corner: 0.2 & 0.4 mm R
20-32 Ra surface finishes
Ideal for facing and shouldering in narrow confined areas.
Well suited for milling flats on bar stock with Mill-Turn machines.

Chip-Surfer
18N - Front & Back Chamfer Tip

Ø.625-1.090"
Chip Surfer Connection
6 Flute
45° Front & Back Chamfer

Chip-Surfer
18R - Full Radius T-Slitter

Ø.500"-.900"
Chip Surfer Connection
.062"-.187" Slot Width
6 Flute, Full Eff
Positive radial and neutral axial rake geometry

Chip-Surfer
18R - Full Radius T-Slotter

Ø.910"
Chip Surfer Connection
.250"-.375" Slot Width
6 Flute, Stagger Tooth
Positive radial and positive axial rake geometry

Chip-Surfer
18S - Front Back Corner Round

Ø27.7 mm
Chip Surfer Connection
Corner: 1.0, 2.0, 3.0 & 4.0 mm R
6 Flute

Chip-Surfer
18T - T-Slot Preform Blanks

Ø.551-1.125"
Chip Surfer Connection
6 Flute
.075 - .405" Width of slot range
Pressed blanks with no cutting geometry. Will not cut metal unless cutting geometry is produced on diameter and width.

Chip-Surfer
18T - T-Slot Tip

Ø.500-1.000"
Chip Surfer Connection
6 Flute stagger tooth
.056-.375" Width of slot range
Positive axial & positive radial rake geometry

Chip-Surfer
18T - T-Slot Tip

Ø13.5-27.7 mm
Chip Surfer Connection
6 Flute stagger tooth
2.0-10.0 mm width of slot range
Positive axial & positive radial rake geometry

Chip-Surfer
18V - Dovetail Tip

Ø.500-1.090"
Chip Surfer Connection
6 Flute
Back-Angle: 5°, 10°, 15°, 20°, 27.5°, 30°, 45° & 60°
Included Angle: 10°, 20°, 30°, 40°, 55°, 60°, 90° & 120°

Chip-Surfer
45A - Hi-Feed, Neutral

Ø.375-.750"
Chip Surfer Connection
2 Flute, neutral geometry
Ideal for tight corners, long reach and other abusive conditions

Chip-Surfer
45A - Hi-Feed, Neutral

Ø10-20 mm
Chip Surfer Connection
2 Flute, neutral geometry
Ideal for tight corners, long reach and other abusive conditions

Chip-Surfer
45B_T_P - Ball Nose for Aluminum

Ø.312-1.000"
Chip Surfer Connection
2 Flute, 45° Helix
.7xD Flute Length
Sharp & uncoated for nonferrous materials

Chip-Surfer
45B_T_RA - Positive Ball Nose

Ø.312-.625"
Chip Surfer Connection
2 Flute, 0° Helix
1.0xD Flute Length
Positive radial rake
Ideal for soft materials and finishing in stable conditions
Pressed flute geometry offers economical benefit

Chip-Surfer
45B_T_RB - Helical Ball Nose

Ø.312-.750"
Chip Surfer Connection
2 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
45B_T_RB - Helical Ball Nose

Ø8-16 mm
Chip Surfer Connection
2 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
45B_T_RW - Neutral Ball Nose

Ø.312-.625"
Chip Surfer Connection
2 Flute, 0° Helix
1.0xD Flute Length
Neutral radial rake for edge strength & durability
Ideal for hard steel and finishing irregular stock conditions
Pressed flute geometry offers economical benefit

Chip-Surfer
45B_T_RW - Neutral Ball Nose

Ø8-16 mm
Chip Surfer Connection
2 Flute, 0° Helix
1.0xD Flute Length
Neutral radial rake for edge strength & durability
Ideal for hard steel and finishing irregular stock conditions
Pressed flute geometry offers economical benefit

Chip-Surfer
45D - 90° Drill-Mill Tip

Ø7.8-16 mm
Chip Surfer Connection
2 Flute, 10° Helix
1.0xD Flute Length
Center-cutting
Corner: 0.2, 0.4, 0.3, 0.8, 1.0 & 2.0 mm R
Ideal for milling blind key-slots
Economical solution for 90° shoulders

Chip-Surfer
45D - 90° Drill-Mill Tip

Ø.312-.625"
Chip Surfer Connection
2 Flute, 10° Helix
1.0xD Flute Length
Center-cutting
Corner: .015" R
Ideal for milling blind key-slots
Economical solution for 90° shoulders

Chip-Surfer
45D - 90° End Mill for Aluminum

Ø8-12 mm
Chip Surfer Connection
2 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corner: 0.5 & 1.0 mm R
Sharp and uncoated for nonferrous materials

Chip-Surfer
45D-P - 90° End Mill Tip for Aluminum

Ø.375-.750"
Chip Surfer Connection
2 Flute, 35°or 45° Helix
.7xD Flute Length
Center-cutting
Corner: Sharp, .020" .062" & .125" R
Sharp and uncoated for nonferrous materials

Chip-Surfer
45N_RA - Front-Back Chamfer & C'Sink

Ø1.20 mm Min.
Chip Surfer Connection
45° Cutting Edge Angle (front & back)
90° Included Angle
2 flute

Chip-Surfer
45NMP_RA - Chamfer & Spotting Tip

Ø8-20 mm
Chip Surfer Connection
Cutting Edge Angle options: 18° 30° 40° 45° 50° & 60°
Included Angle options: 144° 120° 100° 90° 80° & 60°
80° Incl. for countersink according to ANSI B18.3 Flat Head Cap Screw (up to 82°)
2 Flute

Chip-Surfer
45Q - Engraving Tip

90° Included Angle
Chip Surfer Connection
1 Flute, R .010" Point

Chip-Surfer
45Q_RA - Engraving Tip

Ø8 mm
Chip Surfer Connection
Cutting Edge Angle: 22.5° 30° & 45°
Included Angle : 45° 60° & 90°
1 Flute, R 0.2 mm Point

Chip-Surfer
45R - Corner Round

Ø4.7 mm Min.
Chip Surfer Connection
Corner: 1.0, 1.6, 2.0 ,2.5, 3.0, 4.0, 5.0 & 6.0 mm R
2 Flute

Chip-Surfer
45U - Backdraft Toroid

Ø10-20 mm
Chip Surfer Connection
2 Flute, 0° Helix
Center-cutting
Corners: 0.5, 1.0, 1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 & 8.0 mm R

Chip-Surfer
45U - Backdraft Toroid Tip

Ø.625-.750"
Chip Surfer Connection
2 Flute, 0° Helix
Center-cutting
Corners: .187" .250" & .312" R

Chip-Surfer
45V - Flat Bottom Plunge & Spotface

Ø.312-.625"
Chip Surfer Connection
2 Flute, Center-Cutting
Corner: .031" R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45V - Flat Bottom Plunge/Spot

Ø8-16 mm
Chip Surfer Connection
2 Flute, Center-Cutting
Corner: 0.4 & 0.8 mm R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45V-P - Flat Bottom Plunge/Spot Aluminum

Ø8-16 mm
Chip Surfer Connection
2 Flute, Center-Cutting, Sharp & Polished
Corner: 0.4 mm R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45V-P - Flat Bottom Plunge/Spot for Aluminum

Ø.312-.625"
Chip Surfer Connection
2 Flute, Center-Cutting, Sharp & Polished
Corner: .015" R
Ideal for long reach Z-Axis plunge roughing, spotfacing, shallow counterboring & creating flat bottom in holes

Chip-Surfer
45X - Spherical Ball Nose

Ø10-20 mm
Chip Surfer Connection
2 Flute, 0° Helix
.7xD Flute Length
120° Radius Wrap

Chip-Surfer
45X - Spherical Ball Nose

Ø.375-1.00"
Chip Surfer Connection
2 Flute, 0° Helix
.7xD Flute Length
120° Radius Wrap

Chip-Surfer
45Z - Center Drill Tip

Ø3.2-6.4 mm
Chip Surfer Connection
DIN 332

Chip-Surfer
45Z - Center Drill Tip

Ø.12-.25"
Chip Surfer Connection
ANSI B94 #4, #5, #6 & #7

Chip-Surfer
45Z_RA - NC Spot Drill

Ø8-16 mm
Chip Surfer Connection
90° & 145° Incl. Angle
Thin web thickness at the point prevents "tool walking"
Accurate hole locating without use of guide bushing

Chip-Surfer
46B-P - Ball Nose for Aluminum

Ø.312-.750"
Chip Surfer Connection
3 Flute, 38° Helix
.7xD Flute Length
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D & 46J - 90° End Mill

Ø7.7-19.7 mm
Chip Surfer Connection
3 Flute, 38° & 45° Helix
.7xD Flute Length
Center-cutting
Corner: Sharp, 0.2, 0.3 & 0.4 R

Chip-Surfer
46D & 46J - 90° End Mill Tip

Ø.312-.500"
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corner: Sharp .015" .031" & .062 R

Chip-Surfer
46D_RB - Lens Form Finisher (Metric)

Ø8.0-20.0 mm (T-Adaption)
3 Flute, 30° helix, center-cutting, with coolant
0.02 mm profile tolerance
Precise lens-shape face geometry for finishing decks using 3-Axis Machine
Improved surface finish with 2x productivity when compared to a ballnose

Chip-Surfer
46D_RN - 90° End Mill for Aluminum

Ø8-20 mm
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Serrated edge
Corner: 0.2mm R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D-P - 90° End Mill for Aluminum

Ø8-20 mm
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corners: SC, 0.5, 1.0, 2.0, 3.0, 4.0 R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D-P - 90° End Mill Tip for Aluminum

Ø.312-1.000"
Chip Surfer Connection
3 Flute, 45° Helix
.7xD Flute Length
Center-cutting
Corners: SC, .020", .031", .062", .094", .125" R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46D-P & 46J-P - 90° EM for Al (1xD Flute)

Ø.375 - 1.250"
Chip Surfer Connection
3 Flute, 45° Helix
1.0XD Flute Length
Center-cutting
Corners: SC, .030", .060", .090", .123", .190", .250", .375" R
Sharp and uncoated for nonferrous materials

Chip-Surfer
46Q - Fine Engraving Tip

60° Included Angle
Chip Surfer Connection
3 Flute, Sharp Point

Chip-Surfer
46W_0 - Taper Form Finisher

Ø8.0-16.0 mm
Chip Surfer Connection
3 Flute, 30° helix, 0.02 mm profile tolerance
Non-center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
46W_1 - Taper Form Finisher for Aluminum

Ø8.0-16.0 mm
Chip Surfer Connection
3 Flute, 30° helix, 0.02 mm profile tolerance
Non-center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Sharp & uncoated for nonferrous materials
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47_RN & 48_RN - 90° Rough End Mill

Ø8-25 mm
Chip Surfer Connection
4, 5, & 6 Flute, 45° Helix
.7xD Flute Length
4 Flute Center-cutting
5 & 6 Flute Non-Center-Cutting
Serrated edges aid with chip evacuation and accelerated feed rates
Corner: chamfer options

Chip-Surfer
47_RN & 48_RN - 90° Rough End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
4, 5, & 6 Flute, 45° Helix
.7xD Flute Length
4 Flute Center-cutting
5 & 6 Flute Non-Center-Cutting
Serrated edges aids with chip evacuation and accelerated feed rates
Corner: chamfer & radius options

Chip-Surfer
47_RQ - 90° Variable Pitch End Mill

Ø8-32 mm
Chip Surfer Connection
4 Flute, 38° Helix
.7xD Flute Length
Center-cutting
Unequal spacing between flutes to diffuse vibration
Corner: Sharp, Chamfer & Radius options

Chip-Surfer
47_RQ - 90° Variable Pitch End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
4 & 5 Flute, 38° Helix
.7xD Flute Length
Center-cutting
Unequal spacing between flutes to diffuse vibration
Corner: Sharp, Chamfer & Radius options

Chip-Surfer
47_RU - 90° Rough-Fin End Mill

Ø8-25 mm
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
Center-cutting
2 serrated edges & 2 smooth edges to diffuse vibration
Corner: chamfers

Chip-Surfer
47_RU - 90° Rough-Fin End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
Center-cutting
2 serrated edges & 2 smooth edges to diffuse vibration
.031" & .062" R & Chamfer

Chip-Surfer
47A_T_RA - Hi-Feed, Positive

Ø.50-75"
Chip Surfer Connection
4 Flute, positive geometry
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
47A_T_RA - Hi-Feed, Positive

Ø8-20 mm
Chip Surfer Connection
4 Flute, positive geometry
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
47B_T_RB - Helical Ball Nose

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
47B_T_RB - Helical Ball Nose

Ø8-25 mm
Chip Surfer Connection
4 Flute, 30° Helix
.7xD Flute Length
2 Center-cutting flutes

Chip-Surfer
47B_T_RB - Helical Ball Nose (1.3xD Flute)

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 30° Helix
1.3xD Flute Length
2 Center-cutting flutes

Chip-Surfer
47B_T_RM - Helical Roughing Ball Nose

Ø.500-1.000"
Chip Surfer Connection
4 Flute, 35° Helix
.7xD Flute Length
Variable Pitch, Progressive Chip Splitters
2 Center-cutting flutes

Chip-Surfer
47B_T_RQ - Variable Pitch Helical Ball Nose

Ø8-20 mm
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
4 Center-cutting flutes
Ideal for hard steel
Well suited for finishing on 5 axis machines

Chip-Surfer
47B_T_RQ - Variable Pitch Helical Ball Nose

Ø.312-.750"
Chip Surfer Connection
4 Flute, 45° Helix
.7xD Flute Length
4 Center-cutting flutes
Ideal for hard steel
Well suited for finishing on 5 axis machines

Chip-Surfer
47B_TQ - Helical Ball Nose

Ø5-6 mm
Chip Surfer Connection
4 Flute, 38° Helix
2 Center-cutting flutes

Chip-Surfer
47B_TQ - Helical Ball Nose

Ø.187-.250"
Chip Surfer Connection
4 Flute, 38° Helix
2 Center-cutting flutes

Chip-Surfer
47C 48C - 90° End Mill (1.5xD Flute)

Ø8-25 mm
Chip Surfer Connection
4, 5 & 6 Flute
4 Flute Center Cutting
5 & 6 Flute Non-Center-Cutting
1.5xD Flute Length
Serrated edges aids with chip evacuation and accelerated feed rates
Chamfered Corners

Chip-Surfer
47C 48C - 90° Roughing End Mill (1.5xD Flute)

Ø.312-1.000"
Chip Surfer Connection
4, 5 & 6 Flute
4 Flute Center Cutting
5 & 6 Flute Non-Center-Cutting
1.5xD Flute Length
Serrated edges aids with chip evacuation and accelerated feed rates
Chamfered Corners

Chip-Surfer
47C_RQ1 - 90° Variable Pitch EM for Hi-Temps

Ø8-25 mm
Chip Surfer Connection
5 Flute, 35°-41° Helix
.7xD Flute Length
Unequal spacing between flutes to diffuse vibration
Corner: Chamfer options
Ideal for Inconel & Hi-Temp Alloys

Chip-Surfer
47D & 47J - 90° End Mill Tip

Ø8-20 mm
Chip Surfer Connection
4 Flute, 30° & 45° Helix
.7xD Flute Length
Center-cutting
Corners: sharp, 0.5, 1.0, 1.5, 2.0, 3.0 & 4.0 R

Chip-Surfer
47D & 47J - 90° End Mill Tip

Ø.312-.750"
Chip Surfer Connection
4 Flute, 30° & 45° Helix
.7xD Flute Length
Center-cutting
Corners: sharp, .015", .031", .062" R

Chip-Surfer
47D_RB - Lens Form Finisher

Ø.312-.500 (T-Adaption)
4 Flute, 30° helix, center-cutting
.00078 profile tolerance
Precise lens-shape face geometry for finishing decks using 3-Axis Machine
Improved surface finish with 2x productivity when compared to a ballnose

Chip-Surfer
47D_RB - Lens Form Finisher (Metric)

Ø8.0-16.0 mm (T-Adaption)
4 Flute, 30° helix, center-cutting
0.02 mm profile tolerance
Precise lens-shape face geometry for finishing decks using 3-Axis Machine
Improved surface finish with 2x productivity when compared to a ballnose

Chip-Surfer
47D_RQ - 90° Variable Pitch End Mill (1.5xD Flute)

Ø8-25 mm
Chip Surfer Connection
4 Flute, 1.5xD Flute Length
Variable Pitch
Center Cutting
Corner: 0.5 R

Chip-Surfer
47D_RQ - 90° Variable Pitch End Mill (1.5xD Flute)

Ø.312-1.000"
Chip Surfer Connection
4 Flute, 1.5xD Flute Length
Variable Pitch
Center Cutting
Corner: sharp, .015" & .031"R

Chip-Surfer
47D_RQ - 90° Variable Pitch End Mill Tip for SS & Hi-Temps

Ø32.00 mm (Metric)
Chip Surfer Connection
5 Flute, 35°/38° Helix
Variable Pitch
Center Cutting
Corner: .157", .197" R

Chip-Surfer
47D_RQ - 90° Variable Pitch Tip for SS & Hi-Temps

Ø.750-1.250"
Chip Surfer Connection
5 Flute, 36°-38° Helix
1.0xD Flute Length
Center-cutting
Corners: .030" .060" .090" .120" .190" .250" .375" R

Chip-Surfer
47J & 45J - 90° Small Dia. End Mill Tip

Ø.062-.250"
Chip Surfer Connection
2 or 4 Flutes, 38° Helix
Center-cutting
Sharp corner

Chip-Surfer
47N & 48N - Chamfer & Countersink Tip

Ø1.95 mm Min.
Chip Surfer Connection
4 & 6 Flute
Cutting Edge Angle options: 30°, 45°, 49° & 60°
Included Angle options: 120°, 90°, 82° & 60°
Non-center cutting

Chip-Surfer
47R - Corner Round Tip

Ø.12" Min.
Chip Surfer Connection
Corners: .031" .062" .093" .125" .187" .250" .312" & .375" R
4 Flute

Chip-Surfer
47R - Corner Round Tip

Ø5.1 mm Min.
Chip Surfer Connection
Corners: 1.0, 1.6, 2.0, 2.5, & 3.0 mm R
4 Flute

Chip-Surfer
47W - Taper Form Finisher

Ø8.0-16.0 mm
Chip Surfer Connection
4 Flute, 30° helix, 0.02 mm profile tolerance
Center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47W - Taper Form Finisher

Ø.312-.500
Chip Surfer Connection
4 Flute, 30° helix, 0.02 mm profile tolerance
Center cutting ball tip
.060" .123" & .157" R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47W_1 - Non-Ferrous Taper Form Finisher (Metric)

Ø8.0-16.0 mm
Chip Surfer Connection
4 Flute, 30° helix, 0.02 mm profile tolerance
Center cutting ball tip
1.5, 2.0, 3.0 & 4.0 R nose
Ideal for finishing blisks, impellers & turbine rotors

Chip-Surfer
47Z - Double Groove Tip for Tube Sheets

Ø.437-.625"
Chip Surfer Connection
4 Flute, 2x .125" wide grooves
Ideal for heat exchange tube sheet grooves

Chip-Surfer
48_ & 49_ - 90° End Mill Tip

Ø8-20 mm
Chip Surfer Connection
6, 8, & 10 Flute, 30 or 45° Helix
.7xD Flute Length
Non-Center Cutting
Corner: Sharp, 0.5, 1.0, 1.5 & 2.0 R

Chip-Surfer
48_ & 49_ - 90° End Mill Tip

Ø.312-1.000"
Chip Surfer Connection
6, 8, & 10 Flute, 30 or 45° Helix
.7xD Flute Length
Non-Center Cutting
Corner: Sharp, .015", .031", .062", .125"R

Chip-Surfer
48A_T_RA - Hi-Feed, Positive

.500-1.000"
Chip Surfer Connection
6 Flute, positive geometry, non-center-cutting
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
48A_T_RA - Hi-Feed, Positive

Ø10-25 mm
Chip Surfer Connection
6 Flute, positive geometry, non-center-cutting
Ideal for hard steel, SS & high-temp alloys

Chip-Surfer
48A_T_RX - Hi-Feed, Neutral

Ø8.00 - 25.00mm
Chip Surfer Connection
6 Flute, neutral geometry
Two flutes center cut for higher ramp capability

Chip-Surfer
48D 49D - 90° Finish End Mill (1.5xD Flute)

Ø8-25 mm
Chip Surfer Connection
7 & 9 Flute, Different Helix & Variable Pitch
1.5xD Flute Length
Non-Center Cutting
Corner: 0.5 0.8 & 1.0 mm R
Ideal for finishing!

Chip-Surfer
48D 49D - 90° Finishing End Mill (1.5xD Flute)

Ø.312-1.000"
Chip Surfer Connection
7 & 9 Flute, Different Helix & Variable Pitch
1.5xD Flute Length
Non-Center Cutting
Corner: .015" & .031"R
Ideal for finishing!

Chip-Surfer
48D_RQ - 90° Variable Pitch Tip, SS & Hi-Temps

Ø8.00 - 25.00 mm (Metric)
Chip Surfer Connection
6 Flute, 35°/38° Helix
.7xD Flute Length
Unequal spacing between flutes to diffuse vibration
Center Cutting
Corner: .015", .020", .031", .039", .118", .157" R
Ideal for Inconel & Hi-Temp Alloys

Chip-Surfer
48D_RQ - 90° Variable Pitch Tip, SS & Hi-Temps

Ø.312-1.000"
Chip Surfer Connection
6 Flute, 35°/38° Helix
.7xD Flute Length
Unequal spacing between flutes to diffuse vibration
Center Cutting
Corner: .015", .020", .030", .040" R
Ideal for Inconel & Hi-Temp Alloys

Chip-Surfer
48E_RB - Barrel Form Finisher

Ø12.0-16.0 mm (T-Adaption)
6 Flute, 30° helix, Center-Cutting
Precise barrel-shape geometry for finishing 90° and drafted shoulders using 3-Axis and 5-Axis Machines.
Improved surface finish with 3x productivity when compared to a ballnose

Chip-Surfer
48U - Backdraft Toroidal Tip

Ø.375-.625"
Chip Surfer Connection
6 Flute, 30° Helix
Corners: .031", .062", .125", .200" R

Chip-Surfer
48U - Backdraft Toroidal Tip (Metric)

Ø8.00 - 16.00mm
Chip Surfer Connection
6 Flute, 30° Helix
Corners: .031", .062", .125", .200" R

Chip-Surfer
49L - Face & Countour Tip

Ø11-15 mm
Chip Surfer Connection
8 & 12 Flute, Variable Pitch & Helix
82° Cutting Edge Angle
1 mm Corner Radius
Non-center cutting
Finishes 50 - 70 Ra
Ideal for finish milling titanium & hi-temp alloy turbine blades on 5-Axis machines

Chip-Surfer
4RB - Ball Nose Blanks

Ø.315 - .787"
Chip Surfer Connection
Grades: IN04S, IN05S & IN06S

Chip-Surfer
4RJ - End Mill Rod

Ø.315-1.001"
Chip Surfer Connection
Grades: IN04S, IN05S & IN06S

Chip-Surfer
4RJ - T-Slot Rod

Ø.543-1.401"
Chip Surfer Connection
Grade: IN30M

Chip-Surfer
C*T

C-Adapter (ISO 26623-1)
Chip Surfer Connection
Neck Relief
Quick Change Holder
AD Style with Ported Coolant delivery
Do not apply lubricant to the threaded connection.
*See Notes below

Chip-Surfer
C*T (Metric)

C-Adapter (ISO 26623-1)
Chip Surfer Connection
Neck Relief
Quick Change Holder
AD Style with Ported Coolant delivery
Do not apply lubricant to the threaded connection
*See Notes below

Chip-Surfer
CND - Flat Bot Drill/C'Bore

Ø.312-.750"
Chip Surfer Connection
1.2xD Drill Depth
2 Flute, Center-Cutting
Ideal for shallow drilling, counterboring & creating flat bottom in holes, even on inclined or uneven surfaces

Chip-Surfer
CND - Flat Bottom Drill/C'Bore

Ø8-20 mm
Chip Surfer Connection
1.2xD Drill Depth
2 Flute, Center-Cutting
Ideal for shallow drilling, counterboring & creating flat bottom in holes, even on inclined or uneven surfaces

Chip-Surfer
DIN69871*T (Metric)

DIN69871 V-Flange
Chip Surfer Connection
AD Style Coolant (coolant through the center)
Balanced G2.5@20,000 RPM
Do not apply lubricant to the threaded connection

Chip-Surfer
ER*T - Solid ER, Neck Relief

Solid ER in sizes 11, 16, 20, 25 & 32
Chip Surfer Connection
Neck Relief
Coolant Options

Chip-Surfer
HSKA*T

HSK-A (DIN 69893/A)
Chip Surfer Connection
Balanced G2.5@20,000 RPM
AD Style Coolant
Do not apply lubricant to the threaded connection
*See Notes below

Chip-Surfer
HSKA*T (Metric)

HSK-A (DIN 69893/A)
Chip Surfer Connection
Balanced G2.5@20,000 RPM
AD Style Coolant
Do not apply lubricant to threaded connection
*See Notes below

Chip-Surfer
S*T*CA - Carbide Shank, Necked

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*CA - Carbide Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*CA - Carbide Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*CK - Carbide Shank, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*CK - Carbide Shank, Cone Neck

Cylindrical Shank
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*HA - Heavy Metal Shank, Necked

Cylindrical Shank (Inch)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*HA - Heavy Metal Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*HA - Heavy Metal Shank, No Neck

Cylindrical Shank
Chip Surfer Connection
No Neck Relief
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*HK - Heavy Metal, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck
Coolant options

Chip-Surfer
S*T*NA - Steel Shank, Thrust Cool

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Thrust Cool System equipped with brazed Coolant Collar and Coolant Grooves for precise delivery down the Neck OD to the tip's cutting edges
Thrust Cool Shanks are ideal for use with carbide tips that do not have coolant holes

Chip-Surfer
S*T*NA - Steel Shank, Thrust Cool

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Thrust Cool System equipped with brazed Coolant Collar and Coolant Grooves for precise delivery down the Neck OD to the tip's cutting edges
Thrust Cool Shanks are ideal for use with carbide tips that do not have coolant holes

Chip-Surfer
S*T*SA - Steel Shank, Necked

Cylindrical Shank
Chip Surfer Connection
Neck Relief
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*SA - Steel Shank, Necked

Cylindrical Shank (Metric)
Chip Surfer Connection
Neck Relief
Coolant options
Shank modifications can be made by cutting off the back to desired length or turning back neck for more usable length

Chip-Surfer
S*T*SA - Steel Shank, No Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
No Neck Relief
Coolant options
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*SA - Steel Weldon, Chamfered Neck

Weldon Shank (Metric)
Chip Surfer Connection
Neck Relief is either a Radius or Chamfer
Chamfer: 30°
Radius: 5.0 mm R

Chip-Surfer
S*T*SK - Steel Shank, Chamfered Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
30° Chamfer Neck
Due to tolerance, shank diameter will be slightly larger than tip diameter. .010" per side neck modification required for clearance when milling 90° shoulder

Chip-Surfer
S*T*SK - Steel Shank, Cone Neck

Cylindrical Shank
Chip Surfer Connection
Conical Neck

Chip-Surfer
S*T*SK - Steel Shank, Cone Neck

Cylindrical Shank (Metric)
Chip Surfer Connection
Conical Neck

Chip-Surfer
T_T_SA - Extension

Chip Surfer to Chip Surfer
Neck Relief

Chip-Surfer
T_T_SK - Reducer

Chip Surfer to Chip Surfer
Neck Relief

Chip-Surfer
Torque Wrench (Adjustable) CHIP SURFER

Adjustable Torque Handle, Wrench Heads, and Drivers for secure & accurate tightening of Chip Surfer Tips
Components are sold individually, and are not available as an assembly or a set

Chip-Surfer
Torque Wrench (Pre-Set) CHIP SURFER

Pre-Set Torque Wrench Handle with Replaceable Thin Open End Wrench Head that fits Chip Surfer tip wrench flats
No lubricant on adaption
Optional Accessory Item

Chip-Surfer
W*T*SA - Steel Weldon, Chamfered Neck

Weldon Shank
Chip Surfer Connection
Neck Relief is either a Radius or Chamfer
Chamfer: 30°
Radius: 0.197 - 0.236" R

Chip-Surfer
Wrench CHIP SURFER

Thin Open End Wrenches for use with Chip Surfer tips
Do not use lubricant on adaption
When assembling, be sure tip is seated firmly on shank with no
Optional Accessory Item
Tip should seat firmly on shank with no gap when assembling

CoolBurst
QWIK CHANGE COUPLING SYSTEM

Coupling System for use with CoolBurst holders
Hose Set, Hose, and Connector are sold separately

Cougar-Mill
5C2M - 60° Heavy Duty Face Mill

Ø4.00-14.00" (RH rotation)
.51" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill
5C2M_L - 60° Heavy Duty Face Mill

Ø8.00-14.00" (LH rotation)
.51" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power Shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill
SPKN20_HD Heavy Duty

Milling Insert

Cougar-Mill
Tune-Up Kit

Cougar Mill Hardware Kit
Includes Seat, Screw, Wedge, and Wedge Screw

Cougar-Mill
ZPKN20_HD Heavy Duty

Serrated Milling Insert

Cougar-Mill-HSHR
5C4M_L - 60° Heavy Duty HSHR Face Mill

Ø10.00-14.00" (LH rotation)
.484" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill-HSHR
5C4M_R - 60° Heavy Duty HSHR Face Mill

Ø4.00-14.00" (RH rotation)
.484" Depth of cut
20 mm Insert with 4 indexes
Finishes as good as 63 Ra
Wedge-held inserts with pocket protection
Power shear geometry ideally suited for hard materials, weld & interruptions

Cougar-Mill-HSHR
SEXN_L

Milling Insert

CutSFeed
SFC

Pressed Single-Ended Insert
For Parting & Deep Grooving
C-Type Chipbreaker

CutSFeed
SFER/L - External Holder

For Parting & Grooving
20-25 mm Shank

CutSFeed
SFER/L - External Holder

For Parting & Grooving
.750-1.000" Shank

CutSFeed
SFGB32 - Blade

For Parting & Grooving
Up to 3.94" Diameter

CutSFeed
SFJ

Pressed Single-Ended Insert
For Parting & Deep Grooving
J-Type Chipbreaker

CutSFeed CoolBurst
SFER/L-TB - External Holder

For Parting & Grooving
25 mm Shank
High Pressure Coolant

CutSFeed CoolBurst
SFER/L-TB - External Holder

For Parting & Grooving
1.000" Shank
High Pressure Coolant

CutSFeed CoolBurst
SFGB32-TB - Blade

For Parting & Grooving
Up to 3.94" Diameter
High Pressure Coolant

CutSFeed CoolBurst
TTBU-TB - Block

For CutSFeed Blades
For Parting and Deep Grooving
Removeable Top Clamp
.750-1.250" Shank
High Pressure Coolant

DAndrea-Modulhard
16CA ISO5611 - ISO Cartridge

16 mm ISO Cartridge
Options: 45°, 75°, 90° or 95°
D’Andrea MHD compatible

DAndrea-Modulhard
ANSI/CAT MHD

ANSI CAT Spindle Adapter (metric pull stud)
D’Andrea MHD compatible

DAndrea-Modulhard
B1 - Carbide Boring Bar

Ø.098-.236" (Ø2.5-6.0 mm)
Flatted Shank (Metric)
D’Andrea MHD compatible

DAndrea-Modulhard
B1 - Steel Boring Bar

Ø.236-.708" (Ø6-18 mm)
Flatted Shank (Metric)
For use with TRM32HSB
D’Andrea MHD compatible

DAndrea-Modulhard
B3 - Steel Boring Bar

Ø.236-1.18" (Ø6-30 mm)
Flatted Shank (Metric)
D’Andrea MHD compatible

DAndrea-Modulhard
B5 - Heavy Metal Boring Bar

Ø.236-.708" (Ø6-18 mm)
Flatted Shank (Metric)
D’Andrea MHD compatible

DAndrea-Modulhard
B8 - Carbide Boring Bar

Ø.236-.708" (Ø6-18 mm)
Flatted Shank (Metric)
D’Andrea MHD compatible

DAndrea-Modulhard
BMD - Carbide Shank

Carbide Shank (Metric)
D’Andrea MHD Connection

DAndrea-Modulhard
BMD - Carbide Shank

Carbide Shank
D’Andrea MHD Connection

DAndrea-Modulhard
BPS - Roughing & Finishing Crossbar

Ø7.874-110.236" (Ø200-2800 mm)
For roughing and finishing applications
D’Andrea MHD compatible

DAndrea-Modulhard
BR

Cylindrical or Flatted Shank
D’Andrea MHD Connection

DAndrea-Modulhard
CAT_UNCFCMHD

FC (Face Contact) CAT Spindle Adapter (inch pull stud)
AD coolant supply
D’Andrea MHD compatible

DAndrea-Modulhard
CAT_UNCMHD

CAT Spindle Adapter (inch pull stud)
D’Andrea MHD compatible

DAndrea-Modulhard
DIN 2080-A

DIN Spindle Adapter
D’Andrea MHD compatible

DAndrea-Modulhard
DIN 228 / B 1806

DIN 228 / B 1806 Spindle Adapter
D’Andrea MHD compatible

DAndrea-Modulhard
DIN69871

DIN69871
D’Andrea MHD compatible

DAndrea-Modulhard
DIN69871-B40,45,50 (Metric)

ANSI DIN Spindle Adapter
D’Andrea MHD compatible

DAndrea-Modulhard
ER DIN 6499

Collets chucking Tools
D’Andrea MHD compatible

DAndrea-Modulhard
FC (FaceContact) DIN69871 AD

FC (FaceContact) DIN69871 AD
D’Andrea MHD compatible

DAndrea-Modulhard
HSK-A DIN 69893

HSK-A DIN Spindle Adapter
D’Andrea MHD compatible

DAndrea-Modulhard
K01 TRE50-IP69K

Dia. Range: .236" - 5.590"
Contents:
(1) TRE50-IP69K
(1) B3.06
(1) B3.08
(1) B3.11
(1) B3.16
(1) B3.22
(1) P25.63
(1) PS31.24
(1) PS32.24
(1) CW32
(1) SFTP25
(1) SFTP32
(1) SFTP50
(1) BM10
(5) TPGX 090202L
(1) TPGX 110302L
(2) WCGT 020102L

DAndrea-Modulhard
K01 TRM 50/63 - K01 TRM 63/63

Dia. Range: .236" - 4.921"
Contents:
(1) TRM50/63 or TRM63/63
(1) B3.06
(1) B3.08
(1) B3.11
(1) B3.16
(1) B3.22
(1) P20.30
(1) P02.30
(1) P03.30
(1) PS11.30
(1) PS12.30
(1) SFTP25
(1) SFTP32
(1) SFTP50
(1) BM10
(5) TPGX 090202L
(1) TPGX 110302L
(2) WCGT 020102L

DAndrea-Modulhard
K01 TRM 50/80 - K01 TRM 80/80

Dia. Range: .236 - 8.66"
Contents:
(1) TRM50/80 or TRM80/80
(1) B3.06
(1) B3.08
(1) B3.11
(1) B3.16
(1) B3.22
(1) P20.30
(1) P02.30
(1) P03.30
(1) P04.30
(1) PS12.30
(1) PS13.30
(1) SFTP25
(1) SFTP32
(1) SFTP50
(5) TPGX 090202L
(1) TPGX 110302L
(2) WCGT 020102L

DAndrea-Modulhard
MAS 403 BT

Spindle Adapter
D’Andrea MHD compatible

DAndrea-Modulhard
MAS 403 BT B

Spindle Adapter
D’Andrea MHD compatible

DAndrea-Modulhard
MAS 403 BT FC (FaceContact) AD

MAS 403 BT FC (FaceContact) AD
D’Andrea MHD compatible

DAndrea-Modulhard
NMTB 40, 50 MHD

NMTB Spindle Adapter
D’Andrea MHD compatible

DAndrea-Modulhard
P25 - Extension for Cartridges

25 & 32 Cartridges
Ø25 mm Body

DAndrea-Modulhard
PCxx.50 - Slide for TP Holder

Holders for 16 mm ISO Cartridges
D’Andrea MHD compatible

DAndrea-Modulhard
PR - Extension

D’Andrea MHD Connection

DAndrea-Modulhard
PRL - Crossbar Extension

Extensions

DAndrea-Modulhard
PS1x.xx - Slide for TRM

Use with TRM Dovetail Finishing Heads
D'Andrea MHD compatible

DAndrea-Modulhard
PS3x.xx - Slide

Use with D'Andrea Boring Heads

DAndrea-Modulhard
PSC_MHD

ISO26623-1 / PSC
D'Andrea Quick Change MHD Arbor
D’Andrea MHD compatible

DAndrea-Modulhard
PT - Cover Plates

D’Andrea MHD Compatible

DAndrea-Modulhard
RAV - Vibration-Damping Reducer

D’Andrea MHD Connection

DAndrea-Modulhard
RD - Reducer

D’Andrea MHD Connection

DAndrea-Modulhard
RD- Extended Reach Reducer

D’Andrea MHD Connection

DAndrea-Modulhard
SFCC - Finish Cartridge

Use with TRM / TRE Heads
D’Andrea MHD compatible

DAndrea-Modulhard
SFCC_D - Finish Cartridge

Use with TRD Heads
D’Andrea MHD compatible

DAndrea-Modulhard
SFQC - Back Bore Cartridge

Use with TRM / TRE Heads
D’Andrea MHD compatible

DAndrea-Modulhard
SFTP - Finish Cartridge

Use with TRM / TRE Heads
D’Andrea MHD compatible

DAndrea-Modulhard
SFTP_D - Finish Cartridge

Use with TRD Heads
D’Andrea MHD compatible

DAndrea-Modulhard
SMCC - Rough Cartridge

Use with TS Heads
D’Andrea MHD compatible

DAndrea-Modulhard
SSCC - Roughing Cartridge

Use with TS Heads
D’Andrea MHD compatible

DAndrea-Modulhard
SSQC - Back Bore Cartridge

Use with TS Heads

DAndrea-Modulhard
SSSC - Rough Cartridge

Use with TS Heads
D’Andrea MHD compatible

DAndrea-Modulhard
TP - Holder for PC Slide

D’Andrea MHD Connection

DAndrea-Modulhard
TRE-69K - Digital Fine Boring Head

Ø.098-4.33"
IP69K protection (dust/coolant)
D'Andrea MHD compatible

DAndrea-Modulhard
TRM - Finish Boring Head

Ø3.030-19.690"
D’Andrea MHD compatible

DAndrea-Modulhard
TRM - Finish Boring Head

Ø.708-4.251"
D’Andrea MHD compatible

DAndrea-Modulhard
TRM - Finish Boring Head

Ø77-500 mm
D’Andrea MHD compatible

DAndrea-Modulhard
TRM - Finish Boring Head

Ø18-84 mm
D’Andrea MHD compatible

DAndrea-Modulhard
TS - Double Bit Roughing Head

Ø.708-7.874"
D’Andrea MHD compatible

DAndrea-Modulhard
TU

Holders for Square Shank Turning
D’Andrea MHD compatible

Deep-Duo GD
GF - Indexable Gun Drill

Ø1.103 -1.575"
Universal Shank

Deep-Duo GD
GF - Indexable Gun Drill

Ø28.01-40 mm
Universal Shank (Metric)

Deep-Duo MC
GF - 10xD Indexable Deep Drill

Ø1.103 -1.575"
Universal Shank

Deep-Duo MC
GF - 10xD Indexable Deep Drill

Ø28.01-40 mm
Universal Shank (Metric)

Deep-Duo MC
GF - 15xD Indexable Deep Drill

Ø28.01-40 mm
Universal Shank (Metric)

Deep-Duo MC
GF - 25xD Indexable Deep Drill

Ø28.01-40 mm
Universal Shank (Metric)

Deep-Duo MC
GF - 25xD Indexable Deep Drill

Ø1.103 -1.575"
Universal Shank

Deep-Duo MC
GF- 15xD Indexable Deep Drill

Ø1.103-1.575"
Universal Shank

Deep-Trio
TBTA-DT - DE4 - Indexable Drill Head

Ø.724 -1.575" (18.4-40mm)
Double Tube System
External 4-Start Thread

Deep-Trio
TBTA-DT - SE4 - Indexable Drill Head

Ø.629-1.575" (16-40mm)
Single Tube System
External 4-Start Thread

Deep-Trio
TBTA-DT - SI1 - Indexable Drill Head

Ø.629-1.575" (16-40mm)
Single Tube System
Internal 1-Start Thread

Deep-Trio
TPHT-DT

3 Cornered Stepped Outboard Insert with Wiper Flats for Deep Trio
General Purpose

Deep-Trio
TPHT-ML

3 Cornered Stepped Outboard Insert with Wiper Flats for Deep Trio
General Purpose for Lower Powered Machines or
Lower Feed Applications

Deep-Trio
TRH - Brazed Head Indexable Deep Drill

Ø.394-1.260" (10-32 mm)
Common Inch & Metric Sizes

Deep-Trio
TRH-CH - Brazed Head Indexable Deep Drill

Ø.394-1.260" (10-32 mm)

Deep-Trio GD
GT - Indexable Gun Drill

Ø 10-32 mm
Weldon Shank (Metric)

Deep-Trio GD
GT - Indexable Gun Drill

Ø.394-1.260" (10-32 mm)
Universal Shank
Inch & Metric Diameters

Deep-Trio GD
GTADP - 25xD Gun Drill for Cross Holes

Ø.394-1.260"
Universal Shank
Extra row of guide pads for stability through the cross hole

Deep-Trio GD
GTADP - Gun Drill for Cross Holes

Ø.394-1.260"
Cylindrical Shank
Extra row of guide pads for stability through the cross hole

Deep-Trio MC
GT - 10xD Indexable Deep Drill

Ø.394-1.260"
Universal Shank

Deep-Trio MC
GT - 10xD Indexable Deep Drill

Ø 10-32 mm
Universal Shank (Metric)

Deep-Trio MC
GT - 15xD Indexable Deep Drill

Ø 10-32 mm
Universal Shank (Metric)

Deep-Trio MC
GT - 15xD Indexable Deep Drill

Ø.394-1.260"
Universal Shank

Deep-Trio MC
GT - 20xD Indexable Deep Drill

Ø 10-32 mm
Universal Shank (Metric)

Deep-Trio MC
GT - 20xD Indexable Deep Drill

Ø.394-1.260" (10-32 mm)
Universal Shank

Deep-Trio MC
GT - 25xD Indexable Deep Drill

Ø.394-1.260"
Universal Shank

Deep-Trio MC
GT - Gun Drill for Cross Holes

Ø.394-1.260"
Universal Shank
Extra row of guide pads for stability through the cross hole

Deep-Trio MC
GT- 25xD Indexable Deep Drill

Ø 10-32 mm
Universal Shank (Metric)

Deep-Trio MC
GTADP - 10xD Indexable Deep Drill

Ø.394-1.260"
Universal Shank
Extra row of guide pads for stability through the cross hole

Deep-Trio MC
GTADP - 10xD Indexable Deep Drill

Ø 10-32 mm
Universal Shank (Metric)

Deep-Trio MC
GTADP - 15xD Indexable Deep Drill

Ø.394-1.260"
Universal Shank
Extra row of guide pads for stability through the cross hole

Deep-Trio MC
GTADP - 15xD Indexable Deep Drill

Ø 10-32 mm
Universal Shank (Metric)

Deep-Trio MC
GTADP - 25xD Indexable Deep Drill

Ø.394-1.260"
Universal Shank
Extra row of guide pads for stability through the cross hole

Deep-Twist
GDV Drivers

Inch GDV Deep Twist Drivers
Weldon, Cylindrical, and Whistle Notch Driving Shanks
For Use with Threaded Adaption Deep Twist Drill Bodies

Deep-Twist
GDV Drivers (Metric)

Metric GDV Deep Twist Drivers
Weldon, Cylindrical, and Whistle Notch Driving Shanks
For Use with Threaded Adaption Deep Twist Drill Bodies

Deep-Twist
TD - Replaceable Tip Drill

Ø10-25 mm
Modular Shanks (Driver)
200 & 400 mm Lengths
Coolant Through
Holds +.002/-.000 on Hole Diameter

DiFeed-Deka
1DP1G - Hi-Feed End Mill

Ø1.250-1.500" (Cylindrical)
.060" Depth of cut
8 mm Insert with up to 10 indexes
Ideal for interrupted cuts

DiFeed-Deka
1DP1G - Hi-Feed End Mill (Metric)

Ø35.00 - 42.00 mm
TopOn Adaption
1.50 mm Depth of cut
8 mm Insert with up to 10 indexes
Ideal for interrupted cuts

DiFeed-Deka
DP5G - Hi-Feed Face Mill (Metric)

Ø50.00 - 160.00 mm
1.50 mm Depth of cut
8 mm Insert with up to 10 indexes
Ideal geometry for interrupted cuts
Great price-per-edge economy!

DiFeed-Deka
PNCQ08_ZNTN - Flat Top Hi-Feed Insert

Flat Top with strong edge
Ideal for interrupted cuts, mateirals with hard crust and vibration prone conditions
10 indexes

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø1.250-1.500”
Weldon Shank
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø.625-1.500”
TopOn Connection
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø.625-1.000”
Chip Surfer Connection
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
1TG1V - Hi-Feed End Mill

Ø.625-1.000”
Cylindrical Shank
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
TG1V - Hi-Feed Face Mill

Ø2.000-2.500”
06 mm IC Insert with 4 indexes
1.0 mm (.040") Max. depth of cut
Double-Sided 4-corner Insert
Higher Ramp Down Angle with Secure 'V' Clamping for Improved Productivity

DiFeedWinV
UNLV0603M0TR-ML, 06 mm IC Hi-Feed Insert

V-Shaped Contact Face
High Positive, Keen Edge
4 Indexes

DiFeedWinV
UNLV0603M0TR-MM, 06 mm IC Hi-Feed Insert

V-Shaped Contact Face
Multi-Purpose, Keen Edge
4 Indexes

DiPos-Deka
1DM1E - Lead Angle End Mill

Ø16.00 - 40.00mm
TopOn Connection
3.8mm Depth of cut
5 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.50mm

DiPos-Deka
4W2A - 70° Cartridge Face Mill

Ø8.00-12.00"
.23" Depth of cut
Finishes as good as 20 Ra when using wiper in one pocket
8 mm Insert with 10 indexes
Cartridge pocket protection (sold separatly)
Great price-per-edge economy!

DiPos-Deka
DM2Q - 70° Heavy Duty Face Mill

Ø6.00-12.00"
.50" Depth of cut
17 mm Insert with 10 indexes
Pocket protection with screw-held seat
32-63 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPos-Deka
DM5E / DM6E - 66° Lead Angle Face Mill

Ø32.00 - 80.00mm
3.8mm Depth of cut
5 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.50mm

DiPos-Deka
DM5G, DM6G - 70° Face Mill

Ø1.50-8.00"
.23" Depth of cut
8 mm Insert with 10 indexes
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

DiPos-Deka
DM5G, DM6G - 70° Face Mill (Metric)

Ø40.00 - 160.00mm
6.00mm Depth of cut
8 mm Insert with 10 indexes
Finishes as good as 20 Ra when using wiper in one pocket
Carbide & SiN options
Great price-per-edge economy!

DiPos-Deka
DM5Q / DM6Q - 70° Heavy Duty Face Mill (Metric)

Ø80.00 - 315.00 mm
12.00 mm Depth of cut
17 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!

DiPos-Deka
DM5Q, DM6Q - 70° Heavy Duty Face Mill

Ø3.00-12.00"
.50" Depth of cut
17 mm Insert with 10 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!

DiPos-Deka
PNCU08_GNR - SiN Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat produces surface finishes as good as 32 Ra
Designed for iron on facing applications
10 indexes

DiPos-Deka
PNCU08-W - Wiper Insert

Long wiper flat produces surface finishes as good as 20 Ra when placed in one pocket
Remaining pockets to be loaded with _GNTR or -HS
Pressed rake face geometry promotes efficient chip formation
Designed for utmost surface finishes on Steel, Iron, SS & Hi-Temps
2 indexes

DiPos-Deka
PNCU17 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat produces surface finishes as good as 20 Ra
Designed for multiple materials and facing applications
J hone for light duty cuts
E hone for high horse power cuts
10 indexes

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø10-25 mm
TopOn Connection
4 mm Insert with 4 indexes
90°: 3.5 mm DOC, Hi-Feed: 0.5 mm DOC
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.2, 0.4, 0.8mm R & Hi-Feed

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø.500-1.000"
Chip Surfer Connection
4mm Insert with 4 indexes
90°: .14" DOC, Hi-Feed: .019" DOC
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .008" .015" .031" R & Hi-Feed

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø.500-1.000"
TopOn Connection
4 mm Insert with 4 indexes
90° DOC: 0.14" , Hi-Feed DOC: 0.019"
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .008" .015" .031" R & Hi-Feed

DiPosDuo
1TJ1B - 90° & Hi-Feed End Mill

Ø.750-1.500"
Weldon Shank
4 mm Insert with 4 indexes
90°: .14" DOC, Hi-Feed: .019" DOC
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corner: .008" .015" .031" R & Hi-Feed

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed End Mill

Ø.625-1.500"
Weldon Shank
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications
.24" Depth of cut

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed End Mill

Ø.625-1.000"
Chip Surfer Connection
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Backdraft insert option to reduce vibration for long reach applications
.24" Depth of cut

DiPosDuo
1TJ1D - 90° Backdraft & Hi-Feed End Mill

Ø.625-1.500"
Cylindrical Shank
6 mm Insert with 4 indexes
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper
Backdraft insert option to reduce vibration for long reach applications
.24" Depth of cut

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed End Mill

Ø16-40 mm
TopOn Connection
6 mm Insert with 4 indexes
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications
6mm Depth of Cut

DiPosDuo
1TJ1D - 90° B-Draft & Hi-Feed End Mill

Ø16-32 mm
Weldon Shank (Metric)
6 mm Insert with 4 indexes
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
32-63 Ra finish w/ wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications
6mm Depth of Cut

DiPosDuo
1TJ1D - 90° End Mill for Knee Mills

Ø2.50-3.00"
Bridgeport Connection
6 mm Insert with 4 indexes
.24" Depth of cut
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP). 63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø1.000-1.500"
Cylindrical Shank
9 mm Insert with 4 indexes
90°: .32" DOC, Hi-Feed: .059" DOC
Insert corners: .015" .031" .062" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP).
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø1.000-1.500"
TopOn Connection
9 mm Insert with 4 indexes
90°: .32" DOC, Hi-Feed: .059" DOC
Insert corners: .015" .031" .062" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP).
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø20-40 mm
TopOn Connection
9 mm Insert with 4 indexes
90°: 8mm DOC, Hi-Feed: 1.5 mm DOC
Insert corners: 0.4, 0.8, 1.6 mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP).
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø20-32 mm
Weldon Shank (Metric)
9 mm Insert with 4 indexes
90°: 8 mm DOC, Hi-Feed: 1.5 mm DOC
Insert corners: 0.4, 0.8, 1.6 mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1F - 90° & Hi-Feed End Mill

Ø1.000-1.500"
Weldon Shank
9 mm Insert with 4 indexes
90°: .32" DOC, Hi-Feed: .059" DOC
Insert corners: .015", .031", .062" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

Ø1.000-1.500"
Weldon Shank
11 mm Insert with 4 indexes
90°: .41" DOC, Hi-Feed: .078" DOC
Insert corners: .031" .062" .094" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

Ø1.000-1.500"
TopOn Connection
11 mm Insert with 4 indexes
90°: .41" DOC, Hi-Feed: .078" DOC
Insert corners: .031" .062" .094" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1G - 90° & Hi-Feed End Mill

Ø25-40 mm
TopOn Connection
11 mm Insert with 4 indexes
90°: 10.5 mm DOC, Hi-Feed: 2.0 mm DOC
Insert corners: 0.8mm, 1.6mm 2.4mm R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
1TJ1J - 90° & Hi-Feed End Mill

Ø1.250-1.500"
TopOn Connection
14 mm Insert with 4 indexes
90°: .54" DOC, Hi-Feed: .118" DOC
Insert corners: .031" R & Hi-Feed
32-63 Ra finishes when using insert with integrated wiper (WEP)
63-125 Ra finishes when using insert with no integrated wiper

DiPosDuo
MNCU06_P - Insert for Alum, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
To be loaded in all pockets of the cutter
4 Indexes

DiPosDuo
MNCU09_AL - Insert for Alum, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
4 Indexes

DiPosDuo
MNCU11_AL - Insert for Alum, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
4 Indexes

DiPosDuo
MNHU04_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU04_SW - Backdraft Insert

Pressed rake face geometry promotes efficient chip formation.
Integrated wiper flat on OD for producing superior surface finishes.
Backdrafted to minimize radial forces in long reach applications
Ideal for finishing hardened steel > Rc 50
4 Indexes

DiPosDuo
MNHU06 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU06_HW - SS/Hi-Temp/Ti, Face Wiper

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing 32-63 Ra surface finishes
To be loaded in all pockets of the cutter
4 Indexes

DiPosDuo
MNHU06_PH - Insert for SS/Hi-Temp/Ti

Keen edge for SS/Hi-Temp/Ti
Pressed rake face geometry promotes efficient chip formation
4 Indexes

DiPosDuo
MNHU06_SW - Backdraft, OD Wiper

Pressed rake face geometry promotes efficient chip formation.
Integrated wiper flat on OD for producing superior surface finishes.
Backdrafted to minimize radial forces in long reach applications
Ideal for finishing hardened steel > Rc 50
4 Indexes

DiPosDuo
MNHU09_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU11_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU14_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
MNHU14_PNR-M - Multi-Purpose/Face Wiper

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPosDuo
TJ1D - 90° Backdraft & Hi-Feed Face Mill

Ø1.500-3.000"
6 mm Insert with 4 indexes
.24" Depth of Cut
Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
TJ1D - 90° B-Draft & Hi-Feed Face Mill

Ø32-63 mm
6 mm Insert with 4 indexes
6 mm Depth of Cut
Insert corners: 0.4, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP).
63-125 Ra finish w/o wiper
Backdraft insert option to reduce vibration for long reach applications

DiPosDuo
TJ5F - 90° & Hi-Feed Face Mill

Ø40-80 mm
9 mm Insert with 4 indexes
8 mm 90° Depth of Cut
1.5 mm Hi-Feed Depth of Cut
Insert corners: 0.4, 0.8, 1.6mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

Ø40-100 mm
11 mm Insert with 4 indexes
10.5 mm 90° Depth of Cut
2.0 mm Hi-Feed Depth of Cut
Insert corners: 0.8 mm, 1.6 mm 2.4 mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5G TJ6G - 90° & Hi-Feed Face Mill

Ø2.000-4.000"
11 mm Insert with 4 indexes
.41" 90° Depth of Cut
.078" Hi-Feed Depth of Cut
Insert corners: .031" .062" .094" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o wiper

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

Ø2.000-4.000"
14 mm Insert with 4 indexes
.54" 90° Depth of Cut
.118" Hi-Feed Depth of Cut
Insert corners: .031" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
TJ5J TJ6J - 90° & Hi-Feed Face Mill

Ø50-125 mm
14 mm Insert with 4 indexes
13.8 mm 90° Depth of Cut
3.0 mm Hi-Feed Depth of Cut
Insert corners: 0.8 mm R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
TJ6F - 90° & Hi-Feed Face Mill

Ø1.500-4.000"
9 mm Insert with 4 indexes
.32" 90° Depth of Cut
.059" Hi-Feed Depth of Cut
Insert corners: .015" .031" 062" R & Hi-Feed
32-63 Ra finish w/ integrated wiper (WEP)
63-125 Ra finish w/o integrated wiper

DiPosDuo
UNHU04_HF - Hi-Feed Insert

Insert fits same MNHU04 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU06_HF - Hi-Feed Insert

Insert fits same MNHU06 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU09_HF - Hi-Feed Insert

Insert fits same MNHU09 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU11_HF - Hi-Feed Insert

Insert fits same MNHU11 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosDuo
UNHU14_HF - Hi-Feed Insert

Insert fits same MNHU14 pocket for Hi-Feed milling applications
Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
4 Indexes

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø10-25 mm
Cylindrical Shank (Metric)
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø.312-1.000”
Cylindrical Shank
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø.394-1.00"
Chip Surfer Connection
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø.394-1.250”
TopOn Connection
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1B - Hi-Feed End Mill

Ø10-32 mm
TopOn Connection
4 mm IC Insert with 4 indexes
.5 mm (.020") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø.625-1.250”
Cylindrical Shank (Inch & Metric)
.040" Max. depth of cut
6 mm IC Insert with 4 indexes
Three different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø16-30 mm
Cylindrical Shank (Metric)
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø.62-1.00"
Chip Surfer Connection
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø.625-1.500”
TopOn Connection
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1F - Hi-Feed End Mill

Ø16-30 mm
TopOn Connection
6 mm IC Insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent high feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø1.250-1.500”
Weldon Shank (Extended)
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø25-32 mm
Cylindrical Shank (Metric)
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility.
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø1.00-1.500”
TopOn Connection
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø25-35 mm
TopOn Connection
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
1TG1G - Hi-Feed End Mill

Ø1.000”
Cylindrical Shank
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility.
Excellent hi-feed performance & economy!

DiPosFeed
1TG1J - Hi-Feed End Mill

Ø1.250-1.50”
Weldon Shank (Extended)
11 mm IC Insert with 4 indexes
2 mm (.078") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
1TG1J - Hi-Feed End Mill

Ø30-42 mm
TopOn Connection
11 mm IC Insert with 4 indexes
2 mm (.078") Max. depth of cut
Two different insert edge preparations provide application flexibility
Excellent high-feed performance & economy!

DiPosFeed
TG1F - Hi-Feed Face Mill

Ø2.000”
1 mm (.039") Max. depth of cut
6 mm IC insert with 4 indexes
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1F - Hi-Feed Face Mill (Metric)

Ø40-63 mm
6 mm IC insert with 4 indexes
1 mm (.039") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1G, TG2G - Hi-Feed Face Mill

Ø2.000-3.000”
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1G,TG2G,TG3G,TG4G - Hi-Feed Face Mill

Ø40-80 mm
9 mm IC Insert with 4 indexes
1.5 mm (.059") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
TG1J, TG2J - Face Mill

Ø50-100 mm
11 mm IC Insert with 4 indexes
2.0 mm (.078") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent Hi-Feed performance & economy!

DiPosFeed
TG1J, TG2J - Hi-Feed Face Mill

Ø2.000-4.000”
11 mm IC Insert with 4 indexes
2.0 mm (.078") Max. depth of cut
Three different insert edge preparations provide application flexibility
Excellent hi-feed performance & economy!

DiPosFeed
UNLU0402M0TR, 4 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0603M0TR, 6 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0603M0TR-ML, 6 mm IC Hi-Feed Insert

High-Positive - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0603M0TR-MM, 6 mm IC Hi-Feed Insert

Multi-Purpose - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0904M0TR, 9 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0904M0TR-ML, 9 mm IC Hi-Feed Insert

Multi-Purpose - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU0904M0TR-MM, 9 mm IC Hi-Feed Insert

Multi-Purpose - Keen Edge
Ideal for ferrous materials
4 Indexes

DiPosFeed
UNLU1105M0TR, 11 mm IC Hi-Feed Insert

Multi-Purpose
Ideal for ferrous materials
4 Indexes

DiPosFinishT
ANED12_CBN - CBN Tipped Insert

Positive rake face geometry promotes efficient chip evacuation
Crowned wiper produces surface finishes as good as 3 Ra
1 Index

DiPosFinishT
ANED12_ML - Carbide & Cermet Inserts

Pressed rake face geometry promotes efficient chip evacuation
Crowned wiper produces surface finishes as good as 3 Ra
Designed for multiple materials and applications
4 Indexes

DiPosFinishT
TA3Q - Fixed Pocket Finish Face Mill

Ø2.000-6.000"
12 mm Insert with up to 4 indexes
.020" Max. Depth of Cut (.012" Min. depth of cut)
Non-adjusting design reduces set up time
Long crowned wiper produces 3-15 Ra surface finish
Stepped insert orientation alleviates axial & radial forces
Can mill up to 90° shoulder
Carbide, CBN & PCD insert offering for a wide variety of materials

DiPos-Hexa
HN5D, HN6D - 45° Face Mill

Ø40-160 mm
6 mm Insert with 12 indexes
3 mm Depth of cut
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5D, HN6D - 45° Face Mill

Ø1.50-6.00"
.11" Depth of cut
6 mm Insert with 12 indexes
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5G, HN6G - 45° Face Mill

Ø63-250 mm
10 mm Insert with 12 indexes
5 mm Depth of cut
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HN5G, HN6G - 45° Face Mill

Ø2.50-10.00"
.20" Depth of cut
10mm Insert with 12 indexes
32-63 Ra surface finishes
Great price-per-edge economy!

DiPos-Hexa
HNGU06_ML - SS/Hi-Temp/Ti

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Keen edge for giummy materials
12 indexes

DiPos-Hexa
HNGU10_M - Medium Roughing Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper
Designed for multiple materials and applications
12 indexes

DiPosPenta
1DP1C - Hi-Feed End Mill

Ø.750-1.500"
TopOn Connection
5 mm Insert with 10 indexes
.059" Depth of cut
Same insert fits Hi-Feed & 65° MIlls
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
1DP1C - Hi-Feed End Mill

Ø.750-1.500"
Cylindrical Shank
5 mm Insert with 10 indexes
.059" Depth of cut
Same insert fits Hi-Feed & 65° MIlls
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
1DP1P - Hi-Feed End Mill

Ø1.500"
Cylindrical Shank
10 mm Insert with 10 indexes
.11" Depth of cut
Same insert fits Hi-Feed & 65° MIlls
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
DM6C - 65° Face Mill

Ø1.500-3.000"
5 mm Insert with 10 indexes
.13" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining
Great price-per-edge economy!

DiPosPenta
DM6P - 65° Face Mill

Ø2.00-4.00"
.25" Depth of cut
10mm Insert with 10 indexes
Same insert fits Hi-Feed & 65° MIlls
63-125 Ra surface finishes
Positive rake and reinforced edge offer low cutting forces and smooth machining
Great price-per-edge economy!

DiPosPenta
DP6C - Hi-Feed Face Mill

Ø1.500-2.500"
5 mm Insert with 10 indexes
.059" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
DP6P - Hi-Feed Face Mill

Ø2.000-3.000"
10 mm Insert with 10 indexes
.11" Depth of cut
Same insert fits Hi-Feed & 65° Mills
Positive rake and reinforced edge offer low cutting forces and smooth machining in deep cavities
High ramping capability
Great price-per-edge economy!

DiPosPenta
PNCU10_ML - Insert for SS/Hi-Temp/Ti

Keen Edge for SS/Hi-Temp/Ti
Positive rake face for efficient chip evacuation and smooth cutting
10 indexes

DiPosProB
12L8D 90° - Circle Segment End Mill

Ø12-32mm
TopOn Connection
6 mm Insert with 4 indexes
Insert Form Radii: 20mm

DiPosProB
12M8D 75° - Circle Segment End Mill

Ø16-25mm
TopOn Connection
6 mm Insert with 4 indexes
Insert Form Radii: 20mm

DiPosProB
12M8G 75° - Circle Segment End Mill

Ø20-32mm
TopOn Connection
12 mm Insert with 4 indexes
Insert Form Radii: 30mm

DiPosProB
12N8D 45° - Circle Segment End Mill

Ø16-20mm
TopOn Connection
6 mm Insert with 4 indexes
Insert Form Radii: 20mm

DiPosProB
12N8G 45° - Circle Segment End Mill

Ø32 mm
TopOn Connection
12 mm Insert with 4 indexes
Insert Form Radii: 30mm

DiPosQuad
1DJ1E - 90° End Mill

Ø16-40 mm
TopOn Connection
7 mm Insert with 8 indexes
5 mm Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corner: .031" R

DiPosQuad
1DJ1E - 90° Rough & Finish End Mill

Ø16-32 mm
Weldon Shank (Metric)
7 mm Insert with 8 indexes
5 mm Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corner: .031" R

DiPosQuad
1DJ1E - 90° Rough & Finish End Mill

Ø.625-1.500"
Weldon Shank
7 mm Insert with 8 indexes
Insert corner: .031" R
.19" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
1DJ1R - 90° End Mill

Ø1.00-1.50"
TopOn Connection
10 mm Insert with 8 indexes
.27" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corner: .031" R

DiPosQuad
1DJ1R - 90° Rough & Finish End Mill

Ø25-40 mm
Weldon Shank
10 mm Insert with 8 indexes
Insert corner: 0.8 mm R
7 mm Depth of cut
0.4-0.8 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
1DJ1R - 90° Rough & Finish End Mill

Ø1.000-1.500"
Cylindrical Shank
10 mm Insert with 8 indexes
Insert corner: .031" R
.27" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
1DJ1R - 90° Rough & Finish End Mill

Ø1.000-1.500"
Weldon Shank
10 mm Insert with 8 indexes
Insert corner: .031" R
.27" Depth of cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!

DiPosQuad
DJ5E - 90° Rough & Finish Face Mill

Ø32-50 mm
7 mm Insert with 8 indexes
5 mm Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5E, DJ6E - 90° Rough & Finish Face Mill

Ø1.500-3.000"
7 mm Insert with 8 indexes
.19" Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5G, DJ6G - 90° Face Mill

Ø2.000-6.000"
12 mm Insert with 8 indexes
.33" Depth of Cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
DJ5R, DJ6R - 90° Rough & Finish Face Mill

Ø40-125 mm
10 mm Insert with 8 indexes
7 mm Depth of Cut
0.4-0.8 Ra surface finishes when engaging the wiper (WEP)
Insert corners: 0.8 R

DiPosQuad
DJ5R, DJ6R - 90° Rough & Finish Face Mill

Ø1.500-5.000"
10 mm Insert with 8 indexes
.27" Depth of Cut
15-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .031" R

DiPosQuad
SQGU07_M - Multi-Purpose, Full Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes

DiPosQuad
SQGU07_ML - High Positive, Full Shoulder

High Positive & Keen edge
Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes

DiPosQuad
SQGU10_MP - Positive, Partial Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" .062" R
8 indexes
90° Shoulder up to .27"
Ideal for roughing

DiPosQuad
SQGU12_MM - High Positive, Partial Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" R
8 indexes
Ideal for finishing and lighter chiploads

DiPosQuad
SQXU12_M - Positive, Partial Shoulder

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Insert Corner: .031" .062" R
Strengthened Edge for abusive conditions & aggressive chiploads
8 indexes
Ideal for Roughing

DiPosQuadF
DG6G - Hi-Feed Face Mill

Ø50-100 mm
11 mm Insert with 8 indexes
1.8 mm Axial depth of cut for X/Y axis milling
7.5 mm Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DG6K - Hi-Feed Face Mill

Ø63-125 mm
14 mm Insert with 8 indexes
2.5 mm Axial depth of cut for X/Y axis milling
9.5 mm Radial width of cut for plunge milling
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5G DN6G - 45° Face Mill

Ø1.500-6.000"
11 mm Insert with 8 indexes
.165" Depth of cut
32-63 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5G DN6G - 45° Face Mill

Ø40-160 mm
11 mm Insert with 8 indexes
4.2 mm Depth of cut
0.8-1.6 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5K DN6K - 45° Face Mill

Ø50-200 mm
14 mm Insert with 8 indexes
6 mm Depth of cut
32-63 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
DN5K DN6K - 45° Face Mill

Ø2.000-8.000"
14 mm Insert with 8 indexes
.235" Depth of cut
32-63 Ra surface finishes
Ideal for steel and iron
Enjoys heavy chiploads!

DiPosQuadF
SQGU11_M - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Integrated wiper orientation doubles as faceted corner
Designed for multiple materials and applications
8 indexes

DiPosQuadF
SQGU14_ML - SS/Hi-Temp/Ti

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Keen edge for gummy materials
Integrated wiper orientation doubles as faceted corner
8 indexes

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.625-1.000"
Weldon Shank
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.500-1.000"
Cylindrical Shank
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.500-1.000"
Chip Surfer Connection
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill

Ø.625-1.000"
TopOn Connection
5 mm Insert with 2 indexes
90°: .18" DOC, Hi-Feed: .02" DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill (Metric)

Ø12.00 - 16.00 mm
Cylindrical Shank
5 mm Insert with 2 indexes
90°: 4.70 mm DOC, Hi-Feed: 0.50 mm DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° & Hi-Feed End Mill (Metric)

Ø12.00 - 25.00 mm
TopOn Connection
5 mm Insert with 2 indexes
90°: 4.70 mm DOC, Hi-Feed: 0.50 mm DOC
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1C - 90° End Mill for Swiss & Live Tooling

Ø.750-2.000"
Cylindrical Shank
.18" Depth of cut
5 mm Insert with 2 indexes
Insert corners: .008" .015" & .031" R
Shank ideal for ER Spring collets
32-63 Ra surface finishes when engaging the wiper (WEP)
Double-Dovetail-Pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
1TJ1N - 90° End Mill

Ø1.250-1.500"
TopOn Connection
16 mm Insert with 4 indexes
.59" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
1TJ1N - 90° End Mill

Ø1.250-2.000"
Weldon Shank
16 mm Insert with 4 indexes
.59" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062"R

DiPos-Tetra
1TJ1Q - 90° End Mill

Ø1.000-1.500"
Weldon Shank
12 mm Insert with 4 indexes
.43" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
1TJ1Q - 90° End Mill

Ø1.000-1.500"
TopOn Connection
12 mm Insert with 4 indexes
.43" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
1TJ1Q - 90° End Mill (Metric)

Ø25.00 - 40.00 mm
TopOn Connection
12 mm Insert with 4 indexes
11.10 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
ANHU12 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPos-Tetra
ANHU12_P - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
4 Indexes

DiPos-Tetra
ANHU16 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 40 Ra
Designed for multiple materials and applications
4 Indexes

DiPos-Tetra
ANXU12 - Heavy Duty Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPos-Tetra
ANXU16 - Heavy Duty Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
4 Indexes

DiPos-Tetra
ENHU05 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
Designed for multiple materials and applications
2 Indexes

DiPos-Tetra
ENHU05-PH - Insert for SS/HiTemp/Ti

Keen edge for SS/Hi-Temp/Ti
Pressed rake face geometry promotes efficient chip formation
Integrated wiper flats
2 Indexes

DiPos-Tetra
TJ1C - 90° & Hi-Feed Face Mill

Ø1.500-2.000"
5 mm Insert with 2 indexes
.18" 90° Depth of Cut
.02" Hi-Feed Depth of Cut
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
TJ1C - 90° & Hi-Feed Face Mill (Metric)

Ø32.00 - 40.00 mm
5 mm Insert with 2 indexes
4.70 mm 90° Depth of Cut
0.50 mm Hi-Feed Depth of Cut
Insert corners: .008" .015" .031" R & Hi-Feed
32-63 Ra surface finishes when engaging the wiper (WEP)
Double dovetail pocket fosters easy insert indexing & eliminates insert screw stress

DiPos-Tetra
TJ5N, TJ6N - 90° Face Mill

Ø2.000-8.000"
16 mm Insert with 4 Indexes
.59" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094" R

DiPos-Tetra
TJ5N, TJ6N - 90° Face Mill (Metric)

Ø50.00 - 125.00 mm
16 mm Insert with 4 Indexes
15.00 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062", .094" R

DiPos-Tetra
TJ5Q / TJ6Q - 90° Face Mill (Metric)

Ø40.00 - 125.00 mm
12 mm Insert with 4 indexes
11.10 mm Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
TJ5Q, TJ6Q - 90° Face Mill

Ø2.000-4.000"
12 mm Insert with 4 indexes
.43" Depth of cut
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Tetra
TN1N - 45° Face Mill

Ø2.00-6.00"
.332" Depth of cut
16 mm Insert with 4 indexes
32-63 Ra surface finishes when engaging the wiper (WEP)

DiPos-Tetra
ZNHU16 - Insert with chip splitters

Chip Splitters minimize radial forces and break up harmonics for chatter control
Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 40 Ra
Designed for roughing multiple materials and applications
4 Indexes

DiPos-Trio
1DJ1F - 90° Rough & Finish End Mill

Ø1.000-1.500"
Weldon Shank
9 mm Insert with 6 indexes
.24" Depth of cut
25-40 Ra surface finishes when engaging the wiper (WEP)
Great Price-per-Edge economy!
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
1DJ1F - 90° Rough & Finish End Mill

Ø1.000 - 1.500"
TopOn Connection
9 mm Insert with 6 indexes
.24" Depth of cut
25-40 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
1DJ1P_W - 90° Rough & Finish End Mill

Ø1.250-2.000"
Weldon Shank
13 mm Insert with 6 indexes
.36" Depth of cut
25-40 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!
Insert corners: .015", .031", .062" R

DiPos-Trio
1DJ1P_X - 90° Rough & Finish End Mill

Ø1.250-1.500" (M-Adaption)
.36" Depth of cut
13 mm Insert with 6 indexes
25-40 Ra surface finishes when engaging the wiper (WEP)
Great price-per-edge economy!
Insert corners: .015", .031", .062" R

DiPos-Trio
1WJ1D_T - 90° Rough & Ramp End Mill (Metric)

Ø16 - 20mm
Chip Surfer Tip Adaption
4 mm Insert with 6 indexes
3.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .008", .015", .031" R

DiPos-Trio
1WJ1D_W - 90° Rough & Ramp End Mill (Metric)

Ø16 - 32mm
Weldon Shank
4 mm Insert with 6 indexes
3.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .008", .015", .031" R

DiPos-Trio
1WJ1D_X - 90° Rough & Ramp End Mill (Metric)

Ø16 - 40mm
TopOn Adaption
4 mm Insert with 6 indexes
3.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .008", .015", .031" R

DiPos-Trio
1WJ1F_W - 90° Rough & Ramp End Mill

Ø1.000-1.500"
Weldon Shank
6 mm Insert with 6 indexes
.23" Depth of cut
Finishes as good as 80 Ra
Insert corners: .015", .031", .062" R

DiPos-Trio
1WJ1F_W - 90° Rough & Ramp End Mill (Metric)

Ø25-40mm
Weldon Shank
6 mm Insert with 6 indexes
5.8mm Depth of Cut
Finishes 63 - 125 Ra
Insert corners: .015", .031", .062" R

DiPos-Trio
DJ5F - 90° Rough & Finish Face Mill (Metric)

Ø40 - 100mm
9 mm Insert with 6 indexes
6.1mm Depth of cut
Finishes 20 - 32 Ra
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
DJ5F, DJ6F - 90° Rough & Finish Face Mill

Ø2.000-4.000"
9 mm Insert with 6 indexes
.24" Depth of Cut
20-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .020", .031", .039", .062" R

DiPos-Trio
DJ5P, DJ6P - 90° Rough & Finish Face Mill

Ø2.000-6.000"
13 mm Insert with 6 indexes
.36" Depth of Cut
20-32 Ra surface finishes when engaging the wiper (WEP)
Insert corners: .015", .031", .062" R

DiPos-Trio
DJ5P/DJ6P - 90° Rough & Finish Face Mill (Metric)

Ø50 - 160mm
13 mm Insert with 6 indexes
9.1mm Depth of cut
Finishes 20 - 32 Ra
Insert radii: .015", .031", .062" R

DiPos-Trio
FHU - Flat Bottom Plunge Rough End Mill

Ø20.00 - 42.00mm
TopOn Connection
4 mm Insert with 6 indexes
3.8mm Depth of cut
Great price-per-edge economy!
Insert corner: .008", .015", .031" R

DiPos-Trio
FHU - Flat Bottom Plunge Rough Mill

Ø.750-1.000"
Cylindrical Shank
4 mm Insert with 6 indexes
Great price-per-edge economy!
Insert corner: .008", .015", .031" R
.15" Depth of Cut

DiPos-Trio
FHU - Flat Bottom Plunge Rough Mill

Ø1.250-1.500"
Cylindrical Shank
6 mm Insert with 6 indexes
Great price-per-edge economy!
Insert corners: .015", .031", .062" R
.23" Depth of cut

DiPos-Trio
WJ5D / WJ6D - 90° Rough & Ramp Face Mill (Metric)

Ø32 - 63mm
4 mm Insert with 6 indexes
3.8mm Depth of cut
Finishes 63 - 125 Ra
Insert radii: .008", .015", .031" R

DiPos-Trio
WJ5F - 90° Rough & Ramp Face Mill

Ø2.000-4.000"
6 mm Insert with 6 indexes
.23" Depth of cut
Finishes as good as 80 Ra
Insert radii: .015", .031"

DiPos-Trio
WJ5F / WJ6F - 90° Rough & Ramp Face Mill (Metric)

Ø40 - 125mm
6 mm Insert with 6 indexes
5.8mm Depth of cut
Finishes 63 - 125 Ra
Insert radii: .015", .031", .062" R

DiPos-Trio
WNCU06_P - Insert for Non-Ferrous

Pressed rake face geometry promotes efficient chip formation
Sharp edge & polished rake face for non-ferrous materials
6 Indexes

DiPos-Trio
WNGU09 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper on face for producing surface finishes as good as 20 Ra
Designed for multiple materials and applications
6 Indexes

DiPos-Trio
WNGU09_P - Insert for Non-Ferrous

Sharp edge & polished rake face for non-ferrous materials
Integrated wiper on face for producing surface finishes as good as 20 Ra
Pressed rake face geometry promotes efficient chip formation
6 Indexes

DiPos-Trio
WNGU13 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper on face for producing surface finishes as good as 20 Ra
Designed for multiple materials and applications
6 Indexes

DiPos-Trio
WNGU13-ML - Keen Edge Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper on face for producing surface finishes as good as 20 Ra
Designed with keen edge for gummier materials and finishing applications
6 Indexes

DiPos-Trio
WNMU04 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Designed for multiple materials and applications
6 Indexes

Drill-In
DH - 3xD Solid Carbide Drill, 2-Flute

Ø3-12 mm
Cylindrical Shank (Metric)
140° Included Point
30° Axial Rake
Internal Coolant

Drill-In
DH - 5xD Solid Carbide Drill, 2-Flute

Ø3-12 mm
Cylindrical Shank (Metric)
140° Included Point
30° Axial Rake
Internal Coolant

Drill-In
DJ - 3xD Solid Carbide Drill, 2-Flute

Ø3-12 mm
Cylindrical Shank (Metric)
140° Included Point
30° Axial Rake

Drill-In
DJ - 5xD Solid Carbide Drill, 2-Flute

Ø3-12 mm
Cylindrical Shank (Metric)
140° Included Point
30° Axial Rake

Drill-In
DP - 5xD Solid Carbide Drill, 2-Flute

Ø3-20 mm
Cylindrical Shank (Metric)
Metric & Inch Diameters
150° Included Point
Internal Coolant

Drill-In
DR 5:1

Solid Carbide Drills
L:D Ratio - 5:1
140° Included Point, 30° Axial Rake
Internal Coolant

Drill-In
DR 5:1 (Metric)

Solid Carbide Drills
L:D Ratio - 5:1
140° Included Point, 30° Axial Rake
Internal Coolant

Drill-In
HB00 - Pre-Thread Drill Chamfering Combo

Cylindrical Shank (Metric)
Combine Tap Drilling & Chamfering in One Operation

Drill-In DHXL
DHXL 16xD Extra Long Solid Carbide Drill

Ø3-16 mm
Cylindrical Shank (Metric)
135° Included Point
Double Margin

Drill-In DHXL
DHXL 20xD Extra Long Solid Carbide Drill

Ø3-14 mm
Cylindrical Shank (Metric)
135° Included Point
Double Margin

Drill-In DHXL
DHXL 25xD Extra Long Solid Carbide Drill

Ø3-12 mm
Cylindrical Shank (Metric)
135° Included Point
Double Margin

Drill-In DHXL
DHXL 30xD Extra Long Solid Carbide Drill

Ø3-10 mm
Cylindrical Shank (Metric)
135° Included Point
Double Margin

Drill-In DHXL
DHXL 40xD Extra Long Solid Carbide Drill

Ø3-8 mm
Cylindrical Shank (Metric)
135° Included Point
Double Margin

Drill-In DHXL
DHXL 50xD Extra Long Solid Carbide Drill

Ø4-6.35 mm
Cylindrical Shank (Metric)
135° Included Point
Double Margin

Drill-In XL
DRXL 15xD Solid Carbide Drill

Ø4-10 mm
Cylindrical Shank (Metric)
140° Included Point
30° Axial Rake

Drill-In XL
DRXL 20xD Solid Carbide Drill (Inch Shk)

Ø.2500-.3750"
Cylindrical Shank (Inch)
Unique geometry with high performance

Drill-In XL
DRXL 20xD Solid Carbide Drill (Metric Shk)

Ø4-10 mm
Cylindrical Shank (Metric)
Unique geometry with high performance

Drill-Pak
FAK

Indexable Spot & Chamfer Kit
Available in 82 & 90 Degree Point Angles For Spotting and Chamfering
Includes: 1 drill, 10 (triangle) inserts, 1 Torx driver, 3 extra insert screws

FaceFlex
TDGX

Precision Double-Ended Insert
For Threading
60° Partial Profile

FaceFlex
TXFPR/L - External Holder

Shallow Groove Depth
Perpendicular for Face Grooving, Turning & Threading
1.000" Shank

FaceFlex CoolBurst
TXFPR/L-TB - External Holder

Shallow Groove Depth
Perpendicular for Face Grooving, Turning & Threading
1.000" Shank
High Pressure Coolant

Fast-Break
BEEW - Corner Round

Concave corner round inserts
Inch radii: .031, .062, .098, .125
Metric radii: 1.0, 2.0, 2.5, 3.0
More appealing corner break than a chamfer or a file
Elliptical corner blends to avoid gouging
2 Indexes

Fast-Break
FEEW - Corner Round

Concave Corner Round Inserts
Inch radii: .156, .187, .250
Metric radii: 4.0, 5.0, 6.0
More appealing corner break than a chamfer or a file
Elliptical corner blends to avoid gouging
2 Indexes

Feed-Rounds
45ARA - Hi-Feed End Mill

Ø6-12 mm
Cylindrical Shank (Metric)
4 Flute, 0° Helix

Feed-Rounds
45DRA - Hi-Feed End Mill

Ø6-12 mm
Cylindrical Shank (Metric)
2 or 4 Flute, 0° Helix
Excellent for high productivity
For cast iron, alloy and hardened steel up to 65HRc, stainless steel, titanium and nickel based alloys

Feed-Rounds
47A_RA - Hi-Feed End Mill

Ø.250-.750"
Cylindrical Shank
4 Flute, 0° Helix

Feed-Rounds
47ARA - Hi-Feed End Mill

Ø1-20 mm
Cylindrical Shank (Metric)
2 or 4 Flute, 0° Helix

FineMold+
12A5 - Ball Nose & Backdraft End Mill

Ø8-30 mm
Cylindrical Shank (Metric)
Straight carbide body
Ball nose & backdraft insert options
High-precision insert with 1 index

FineMold+
12A9 - Ball Nose & Backdraft End Mill

Ø8-32 mm
Cylindrical Shank (Metric)
Ball nose & backdraft insert options
Coolant directed to cutting edge via coolant channels on insert
High-precision insert with 1 index

FineMold+
NQHB - Metric Barrel (Taper Form) Insert

Milling insert
Ø8mm-30mm

FineMold+
NQHL - Metric Barrel Lens Insert

Milling insert
Ø12mm-30mm

Finish-Ball Plus
12A5 - Ball Nose & Backdraft End Mill

Ø.375-.750"
Cylindrical Shank
Straight carbide body
Ball nose & backdraft insert options
High-precision insert with 1 index

Finish-Ball Plus
12A8 - Ball Nose & Backdraft End Mill

Ø.375-.750"
Cylindrical Shank
Tapered steel body
Ball nose & backdraft insert options
Coolant directed to cutting edge via coolant channels on insert
High-precision insert with 1 index

Finish-Ball Plus
12A9 - Ball Nose & Backdraft End Mill

Ø.375-1.250"
TopOn Connection
Ball nose & backdraft insert options
Coolant directed to cutting edge via coolant channels on insert
High-precision insert with 1 index

Finish-Ball Plus
12A9 - Ball Nose & Backdraft End Mill

Ø.375-1.250"
Cylindrical Shank (Steel)
Ball nose & backdraft insert options
Coolant directed to cutting edge via coolant channels on insert
High-precision insert with 1 index

Finish-Ball Plus
GQHG - Backdraft Insert

Milling insert
Ø.375"-1.000"
Corner radii: .031", .062", .125"

Finish-Ball Plus
GQHG - Metric Backdraft Insert

Milling insert
Ø8mm-25mm
Corner radii: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm

Finish-Ball Plus
NQHG_FM - Ball Nose Insert (Straight)

Milling Insert
Ø.375"-1.250"

Finish-Ball Plus
NQHG_FM - Metric Ball Nose Insert (Straight)

Milling Insert
Ø8mm-32mm

Finish-Ball Plus
NQHG_SM - Ball Nose Insert (Helical)

Milling Insert
Ø.375"-1.250"

Finish-Ball Plus
NQHG_SM - Metric Ball Nose Insert (Helical)

Milling Insert
Ø8mm-32mm

Flex-Lok
SYE-43

Milling Insert

FlexTurn CoolBurst
QE1-S_L-TB - External Modular Holder

Left Hand
16 mm Shank
FlexTurn Connection
High Pressure Coolant

Form-Master
15B1F (.375" Insert)

Ø1.000" Button end mill
.187" Max. depth of cut
.375" Button I.C.

Form-Master
5W6S - Button Face Mill

Ø4.000–6.000”
1.000” IC Insert with 5-10 indexes
.500” Max. depth of cut
Variable land & flat rake face inserts for application flexibility
Heavy duty roughing!
Excellent performance & economy!

Form-Master
RPLH, .750" IC Round

Milling button insert
Single-sided

Form-Master Cera Plus
1DB1H - Ceramic Button End Mill

Ø1.250”
Weldon Shank
.500" IC insert, single sided
.250” Max. depth of cut
Secure Clamping, flat & dimple style inserts
Reliable performance, strength & economy!

Form-Master Cera Plus
RNGN_T6, .500" IC Round

Ceramic button milling insert, face mill
RNGN double sided flat

Form-Master Cera Plus
RPGN_E04, .500" IC Round

Ceramic button milling insert, face mill
RPGN single-sided flat

Form-Master Plus
15B1 - Button End Mill

Inch & metric diameters
TopOn Connection
Button I.C.: 6, 8, 10, 12, & 16 mm

Form-Master Plus
5W7 (10-20 mm Inserts)

Button Face Mill
Button I.C.: 10, 12, 16 & 20 mm
Inch cutter bodies

Form-Master Plus
RHHT

Milling button insert
Single-sided

Form-Master Plus
RHHW

Milling button insert
Single-sided

Form-Master Pro
15E1H - Button & Serrated End Mill

Ø1.000-1.500”
TopOn Connection
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Round & serrated button inserts
Reliable performance, strength & economy!

Form-Master Pro
15E1K - Button End Mill

Ø1.250-1.500”
TopOn Connection
16 mm IC Insert with anti-rotation
8 mm (.315") Max. depth of cut
Round & serrated button inserts
Reliable performance, strength & economy!

Form-Master Pro
5E6H - Button Face Mill

Ø50-80 mm
12 mm Insert IC
Serrated insert offers 4 indexes
Round insert offers 8 indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

Form-Master Pro
5E6K - Button Face Mill

Ø2.000-5.000"
16 mm IC Insert
Serrated insert offers 4 indexes
Round insert 8 offers 8 Indexes
Anti-rotation insert mounting
Strong inserts clamping screw for demanding applications
Reliable performance, strength & economy!

Form-Master Pro
RCLT1204M0N-CC1, 12 mm IC Round

Standard, Neutral - 6 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1204M0N-CC2, 12 mm IC Round

Heavy-Duty, Neutral - 6 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0N-CC1, 16 mm IC Round

Standard, Neutral - 8 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0N-CC2, 16 mm IC Round

Heavy-Duty, Neutral - 8 mm R
Ideal for ferrous materials
4 Indexes

Form-Master Pro
RCLT1606M0N-CP, 16 mm IC Round

Grd/Pol for Al - 8 mm R
Ideal for non-ferrous materials
4 Indexes

Form-Master R
1DE1H - Button & Serrated End Mill

Ø1.250” & 1.500”
TopOn Connection
12 mm IC Inser with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
1DE1H - Button End Mill

Ø1.250 - 1.500"
Cylindrical Shank
12 mm IC Insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
1DE1H - Button End Mill

Ø1.250-1.500"
Weldon Shank
Button End Mill

Form-Master R
1DE6G - Button & Serrated End Mill

Ø25-40 mm
TopOn Connection
10 mm IC Insert with 8-16 indexes
.197" (5 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
1DE6H - Button & Serrated End Mill

Ø32-40 mm
TopOn Connection
12 mm IC Insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
DE6H - Button Face Mill

Ø50-80 mm
12 mm IC Insert with 8-16 indexes
.236" (6 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
DE6K - Button Face Mill

Ø50-160 mm
16 mm IC insert with 4-8 indexes
.315" (8 mm) Max. depth of cut
Round & serrated inserts for application flexibility
Serrated insert for long reach application & chip management
Excellent performance & economy!

Form-Master R
RNLU1004MON-M, 10 mm IC Round

Standard - 5 mm R
Ideal for non-ferrous materials
Double sided insert
8 Indexes

Form-Master R
RNLU1205MON-M, 12 mm IC Round

Standard - 6 mm R
Ideal for non-ferrous materials
Double sided insert
16 Indexes

Form-Master R
RNLU1606MON-M, 16 mm IC Round

Standard - 8 mm R
Ideal for non-ferrous materials
Double sided insert
16 Indexes

Form-Master Shear
15B1A - Button End Mill

Ø20-25 mm
TopOn Connection
10 mm IC Insert
Max. depth of cut: 5 mm
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
15B1A - Button End Mill

Ø1.000-1.250”
TopOn Connection
10 mm IC Insert
Max. depth of cut: 5 mm
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø1.000-1.500”
Cylindrical Shank
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø1.000-1.500”
Weldon Shank
12 mm IC Insert with anti-rotation
6 mm (.236”) Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B1B - Button End Mill

Ø1.000-1.500”
TopOn Connection
12 mm IC Insert with anti-rotation
Max. depth of cut: 5 mm
Reliable performance, strength & economy!

Form-Master Shear
15B4H - Button End Mill

Ø1.000-1.500”
Cylindrical Shank
.500" IC Insert with anti-rotation
.250" Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B4H - Button End Mill

Ø1.000-1.500”
Weldon Shank
.500" IC Insert with anti-rotation
.250" Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B4H - Button End Mill

Ø1.000-1.250”
TopOn Connection
.500" IC Insert with anti-rotation
Max. depth of cut: .250"
Reliable performance, strength & economy!

Form-Master Shear
15B8E - Button End Mill

Ø.625-1.500”
TopOn Connection
4 mm Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15B8E - Button End Mill

Ø.625-1.000”
Cylindrical Shank
8 mm IC Insert
4 mm (.157”) Max. depth of cut
Reliable performance, strength & economy!

Form-Master Shear
15T1G - T-Slotter

Ø2.500-3.000"
TopOn Connection
10 mm IC button insert with 8 indexes
10 mm (.394") Cutting width
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
15T8E - T-Slotter

Ø2.500-3.000"
TopOn Connection
8 mm IC button insert
8 mm (.315") Cutting width
Reliable performance, strength & economy!

Form-Master Shear
1A7G - Button Face Mill

Ø2.000”
10 mm IC Insert with 8 indexes
5 mm Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy

Form-Master Shear
1A7H - Button Face Mill

Ø2.000-6.000”
12 mm IC Insert with 8 indexes
6 mm (.236”) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
1A7H - Button Face Mill

Ø2.000-4.000”
.500” IC Insert with 8 indexes
.250” Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
1A7K - Button Face Mill

Ø2.000-6.000”
16 mm IC Insert with 8 indexes
8 mm (.315”) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
1A7M - Button Face Mill

Ø2.500-6.000”
20 mm (.787”) IC Insert with 8 indexes
.393” (10 mm) Max. depth of cut
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6E - Radial Drive Slotter

Ø2.500-3.000"
8 mm (.315") Cutting Width
8 mm IC Button insert
Reliable performance, strength & economy!

Form-Master Shear
35B6G - Axial Drive Slotter

Ø2.500-3.000"
10 mm (.394") Cutting Width
10 mm IC Button insert with 8 indexes
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6G - Radial Drive Slotter

Ø2.500-3.000"
10 mm (.394") Cutting Width
10 mm IC Button Insert with 8 indexes
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6H - Axial Drive Slotter

Ø3.250-5.000"
12 mm (.472") Cutting Width
12 mm IC Button insert with 8 indexes
Insert anti-rotation
Reliable performance, strength & economy!

Form-Master Shear
35B6H - Radial Drive Slotter

Ø3.250-5.000"
12 mm (.472") Cutting Width
12 mm IC Button Insert with 8 indexes
Insert anti-rotation
Reliable performance, strength!

Form-Master Shear
4W2A - Button Cartridge Face Mill

Ø8.000-12.000”
.750" IC Insert with 8 indexes
.375 Max. depth of cut
Four different insert edge preparations provide application flexibility
Cartridge pocket protection (sold separately)
Excellent performance & economy!

Form-Master Shear
RJET1204MOFN, 12 mm IC Round

Grd/Pol for Al - 6 mm R
Ideal for non-ferrous materials
8 Indexes

Form-Master Shear
RJET1605MOFN , 16 mm IC Round

Grd/Pol for Al - 8 mm R
Ideal for non-ferrous materials
8 Indexes

Form-Master Shear
RJLT1004MON, 10 mm IC Round

Precision, Pos - 5 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLT1004MOTN, 10 mm IC Round

Standard, Pos - 5 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1204MON, 12 mm IC Round

Precision, Pos - 6 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1204MOTN, 12 mm IC Round

Standard, Pos - 6 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1304MON, .500" IC Round

Precision, Pos - .250" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1605MOTN, 16 mm IC Round

Standard, Pos - 8 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT1907MOTN, .750" IC Round

Standard, Pos - .375" R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLT2007MON, 20 mm IC Round

Precision, Pos - 10 mm R
Ideal for ferrous materials
Multiple Indexes

Form-Master Shear
RJLT2007MOTN, 20 mm IC Round

Standard, Pos - 10 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW1004MOTN, 10 mm IC Round

Heavy Duty, Flt - 5 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW1204MOTN, 12 mm IC Round

Heavy Duty, Flt - 6 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW1605MOTN, 16 mm IC Round

Heavy Duty, Flt - 8 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Shear
RJLW2007MOTN, 20 mm IC Round

Heavy Duty, Flt - 10 mm R
Ideal for ferrous materials
8 Indexes

Form-Master Speed
5V6E, 5V6H

Hi-Feed Face Mill
.06" (1.5 mm) Max. depth of cut 5V6E
.08" (2.0 mm)
Max. depth of cut 5V6H
Inserts with 2 indexes
Geometry: Positive/Positive

Form-Master Speed
UHLD13- Hi-Feed Insert

Hi-Feed Insert, 0.118 R (program radius)
2 Indexes

Form-Master V
15V1D - Backdrack & Finish End Mill

Ø1.000-1.250"
TopOn Connection
Insert with 4 indexes
.080" Max. depth of cut
Insert corner: 1 mm (.039") R

Form-Master V
15V1G - Backdraft Finish End Mill

Ø1.000-1.250"
TopOn Connection
Insert with 4 indexes
.118" Max. depth of cut
Insert radius: 2 mm (.078")

Form-Master V
5V6G - Backdraft Finish Face Mill

Ø2.00"
11 mm Insert with 4 indexes
.118" Max. depth of cut
.040" Wiping flat

Form-Master V
CNHU

Pressed rake face geometry

GoldDuty 80°
A-HCLNR/L - Internal Holder

Negative 80° CNMX-HB Inserts
-5° Lead, Hook Lever Clamp
1.250-1.500" Shank
Coolant Thru

GoldDuty 80°
HCLNR/L - External Holder

Negative 80° CNMX-HB Inserts
-5° Lead, Hook Lever Clamp
.750-1.500" Shank

GoldDuty 80°
HCRNR/L - External Holder

Negative 80° CNMX-HB Inserts
15° Lead, OD Turning, Hook Lever Clamp
1.000-1.500" Shank

Gold-Duty Inserts
CNMX HB Chipbreaker

Negative 80° rhombic inserts with HB chipbreaker
For semi heavy turning applications

GoldFlex
TCAQR - External Modular Adaptor

For 27 & 34 mm IC GoldFlex Inserts
For Parting, Grooving, Turning, & Threading
Right Hand
T-Clamp Modular Connection

GoldFlex
TQBS27-EW

Semi-Finished Four Corner Insert
For Wide, Special-Form Grooving

GoldFlex
TQC27

Precision Four Corner Insert
For Parting, Grooving, & Turning
C-Type Chipbreaker

GoldFlex
TQC34

Precision Four Corner Insert
For Parting, Grooving, & Turning
C-Type Chipbreaker

GoldFlex
TQCL - External Modular Adapter

Adapter for Gold Flex inserts (left hand)

GoldFlex
TQHPR/L-27 - External Holder

For 27 mm IC GoldFlex Inserts
Perpendicular for Parting, Grooving, Turning, & Threading
.750-1.000" Shank

GoldFlex
TQHR/L-27 - External Holder

For 27 mm IC GoldFlex Inserts
For Parting, Grooving, Turning, & Threading
.375-1.000" Shank

GoldFlex
TQHR/L-27 - External Holder

For 27 mm IC GoldFlex Inserts
For Parting, Grooving, Turning, & Threading
10-25 mm Shank

GoldFlex
TQHR/L-34 - External Holder

For 34 mm IC GoldFlex Inserts
For Parting, Grooving, & Turning
16-32 mm Shank

GoldFlex
TQHR/L-34 - External Holder

For 34 mm IC GoldFlex Inserts
For Parting, Grooving, & Turning
.750-1.000" Shank

GoldFlex
TQJ27

Precision Four Corner Insert
For Parting, Grooving, & Turning
J-Type Chipbreaker

GoldFlex
TQS27

Precision Four Corner Insert
For Parting, Grooving, & Turning
Flat Top

GoldFlex 20
QE1-TQHL-20 - External Modular Head

For Swiss Machines
For Parting, Grooving, Turning, & Threading
Left Hand
FlexTurn Connection

GoldFlex 20
TCAQL - External Modular Adaptor

For 20 mm IC GoldFlex Inserts
For Parting, Grooving, Turning, & Threading
Left Hand
T-Clamp Modular Connection

GoldFlex 20
TCAQR - External Modular Adaptor

For 20 mm IC GoldFlex Inserts
For Parting, Grooving, Turning, & Threading
Right Hand
T-Clamp Modular Connection

GoldFlex 20
TQHR/L-20 - External Holder

For Swiss Machines
For Parting, Grooving, Turning, & Threading
.375-.750" Shank

GoldFlex 20
TQS20

Precision Four Corner Insert
For Parting, Grooving, & Turning
Flat Top

GoldFlex 20 CoolBurst
TCAQL-TB - External Modular Adaptor

For 20 mm IC GoldFlex Inserts
For Parting, Grooving, Turning, & Threading
Left Hand
T-Clamp Modular Connection
High Pressure Coolant

GoldFlex 20 CoolBurst
TCAQR-TB - External Modular Adaptor

For 20 mm IC GoldFlex Inserts
For Parting, Grooving, Turning, & Threading
Right Hand
T-Clamp Modular Connection
High Pressure Coolant

GoldFlex 20 CoolBurst
TQHR/L-20-TB - External Holder

For Swiss Machines
For Parting, Grooving, Turning, & Threading
.500-.750" Shank
High Pressure Coolant

GoldFlex CoolBurst
TQHR/L-27-TB - External Holder

For Parting, Grooving, Turning, & Threading
.500-1.000" Shank
High Pressure Coolant

GoldFlex CoolBurst
TQHR/L-34-TB - External Holder

For Parting, Grooving, & Turning
16-25 mm Shank
High Pressure Coolant

GoldFlex CoolBurst
TQHR/L-34-TB - External Holder

For Parting, Grooving, & Turning
.750-1.000" Shank
High Pressure Coolant

GoldFlex CoolBurst
TQHR/L-EW-TB - External Holder

For 27 mm TQBS Inserts
For Wide, Special-Form Grooving
20-25 mm Shank
High Pressure Coolant

GoldFlex CoolBurst
TQHR/L-EW-TB - External Holder

For 27 mm TQBS Inserts
For Wide, Special-Form Grooving
.750-1.000" Shank
High Pressure Coolant

Gold-Flex Inserts
TQS27 Threading - 55°

27 mm IC, 4 Indexes
Precision Threading, Partial Profile

Gold-Flex Inserts
TQS27 Threading - ISO

27 mm IC, 4 Indexes
Precision Threading, Full Profile

Gold-Max 4
1SJ1F - 90° End Mill

Ø1.250-1.500"
Cat 40 Connection
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
.42" Max. depth of cut

Gold-Max 4
1SJ1F - 90° End Mill

Ø1.000-1.500"
Weldon Shank
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
.42" Depth of cut

Gold-Max 4
1SJ1F- 90° End Mill

Ø1.000-1.500"
TopOn Connection
11 mm Insert with 4 Indexes
Insert corners: .031", .062", .093", .125" R
.42" Depth of cut

Gold-Max 4
1SJ1Y- 90° End Mill

Ø.750-1.500"
Weldon Shank
Insert with 4 Indexes
Insert corners: .015" .031", .062" R
.31" Max depth of cut

Gold-Max 4
1SJ1Y- 90° End Mill

Ø.750-1.500"
TopOn Connection
Insert with 4 indexes
Insert corner: .015" .031", .062" R
.31" Max. depth of cut

Gold-Max 4
2SJ3F - 90° End Mill

Ø1.250-2.000"
Weldon Shank
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
All Eff./ RH Helix
1.14"-2.29" Max. depth of cut

Gold-Max 4
2SJ3F - 90° Shell Mill

Ø2.000-3.000"
Bore & Keyway
11 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
All Eff./ RH Helix
2.66"-3.04" Max. depth of cut

Gold-Max 4
2SJ3J - 90° Shell Mill

Ø2.500-4.000"
Bore & Keyway
14.5 mm Insert with 4 indexes
Insert corners: .031", .062", .093", .125" R
All Eff./ RH Helix
2.44-3.90" Max. depth of cut

Gold-Max 4
2SJ3Y - 90° End Mill

Ø1.000-1.500"
Weldon Shank
8.4 mm Insert with 4 indexes
Insert corners: .015", .031", .062" R
All Eff./ RH Helix
1.14"-1.68" Max. depth of cut

Gold-Max 4
3EJ6F - Radial Drive Slotter

Ø4.000-10.000"
.625" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6J - Axial Drive Slotter

Ø4.000-10.000"
.750" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert radii: .031", .062", .093", .125"
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6J - Radial Drive Slotter

Ø4.000-12.000"
0.750" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6M - Axial Drive Slotter

Ø4.000-10.000"
1.000" Cutting Width
Insert with 4 indexes (2LH/2RH)
Half Effective
Insert radii: .031", .062", .093", .125"
High quality surface finish produced by wiper on all inserts

Gold-Max 4
3EJ6M - Radial Drive Slotter

Ø4.000-10.000"
1.000" Cutting Width
Insert with 4 indexes (2LH/2RH)
Insert corners: .031", .062", .093", .125" R
Half Effective
High quality surface finish produced by wiper on all inserts

Gold-Max 4
DGM, DGE, DFH, ZGM

Tangential Inserts with 4 Cutting Edges
RH, LH, & Ambidextrous Inserts
Metric Sizes: 8, 10.5, 11, 12.7, 14.5, & 15

Gold-Max 4
DGM315 for 3EJ6F 0.625" Width Slotters

Tangential Inserts with 4 Cutting Edges
2RH / 2LH Edges

Gold-Max 4
DGM325 for 3EJ6J 0.750" Width Slotters

Tangential Inserts with 4 Cutting Edges
2RH / 2LH Edges

Gold-Max 4
DGM426 for 3EJ6M 1.000" Width Slotters

Tangential Inserts with 4 Cutting Edges
2RH / 2LH Edges

Gold-Max 4
SJ5J, SJ6J - 90° Face Mill

Ø3.000-4.000"
14.5 mm Insert with 4 indexes
.54" Max. depth of cut
SJ5 High-density
SJ6 Medium-density

Gold-Max 4
SJ5Y, SJ6Y- 90° High-Density Face Mill

Ø1.500-2.500"
8.4 mm insert with 4 indexes
.31" Max. Depth of Cut
Insert corners: .015", .031", .062" R

Gold-Max 4
SJ6F, SJ5F- 90° Face Mill

Ø2.000-5.000"
11 mm Insert with 4 indexes
.42" Max. depth of cut
Insert corners: .031", .062", .093", .125" R
Medium-density

Gold-Max 4
SN2J - Heavy Duty 45° Face Mill

Ø3.00-8.00"
.32" Max. depth of cut
14.5 mm Insert with 4 indexes
Replaceable steel seating pads ensure maximum cutter body life

Gold-Max 4
SN6J - 45° Face Mill

Ø3.00-8.00"
.32" Max. depth of cut
14.5 mm Insert with 4 indexes
3 Insert types for every application

Gold-Max 4 FFIN
DFH324L001

Tangential Inserts with 4 Cutting Edges
APMX when using DFH324L001 is .040

Gold-Max 4 FFIN
EF6J - Hi-Feed Finishing Face Mill

Ø2.000-8.000"
14.5 mm Insert with 4 indexes
.040" Max. depth of cut
10° Lead angle hi-feed finisher
8-24 Ra Finish

Gold-Max 8
SGM

Milling Insert
12mm IC insert
Insert with 8 indexes

Gold-Quad
25J3P - 90° End Mill

Ø2.000"
50 Taper Connection
13 mm Insert with 4 indexes
Insert corners: .031", .062", .125" R
All Eff. / RH Helix
Ideal for roughing SS & Hi-Temps

Gold-Quad
25J3P - 90° Shell Mill

Ø2.000-4.000"
Bore & Keyway
All Eff. / RH Helix
13 mm Insert with 4 indexes
Ideal for roughing SS & Hi-Temps
Insert corners: .031", .062", .125" R

Gold-Quad
25J3P_R - 90° End Mill for .25"R

Ø2.000"
50 Taper Connection
13 mm Insert
Side Insert with 4 indexes
End Insert Corner: .250" R with 2 indexes
Ideal for roughing SS & Hi-Temps
All Eff. / RH Helix

Gold-Quad
25J3P_R - 90° Shell Mill for .25"R

Ø2.000-4.000"
13 mm Insert
All Eff. / RH Helix
Ideal for roughing SS & Hi-Temps
Side Insert with 4 indexes
End insert corner: .250" R with 2 indexes

Gold-Quad
5J5P - 90° Face Mill

Ø2.000-4.000"
13 mm Insert with 4 indexes
.45" Depth of Cut
Finishes as good as 40 Ra
Insert corners: .031, .047, .062, .093, .125"

Gold-Quad
QHU - Plunge Rough Mill

Ø2.00-4.00"
.44" Depth of cut
13 mm Insert with 4 indexes
Insert corners: .031", .047", .062", .094", .125" R

Gold-Quad
SDES13

Gold Quad Insert

Gold-Quad
SDMS13

Gold Quad Insert

Gold-Quad
SDMS19

Gold Quad Insert

Gold-Quad
SDXS

Gold Quad Insert

Gold-Quad
SDXS1305_

Gold Quad Insert
GoldSfeed MPR High Feed Inserts

Gold-Quad
ZD_S13 Splitters

Positive Splitter Insert

Gold-Quad Plunge
SDES

Gold Quad Insert

Gold-Quad Plunge
SDMS

Gold Quad Insert

Gold-Quad XXX
5G5Q, 5G6Q - Mid Feed Face Mill

Ø2.500-6.000”
16 mm IC insert with 4 indexes
.250" (6.4 mm) Max. depth of cut
30° Mid-feed rougher
Three different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent high feed performance & economy!

Gold-Quad XXX
5M5M, 5M6M - Mid-Feed Face Mill

Ø4.000-6.000”
19 mm IC insert with 4 indexes
.310" (7.87 mm) Max. depth of cut
30° Mid-feed rougher
Multiple insert styles for application flexibility
High material removal rates!
Extremely free cutting!
Excellent performance & economy!

GoldSFeed
15G1B - Hi-Feed End Mill

Ø.375-.750"
Cylindrical Shank
4 mm insert with 4 indexes
.0236" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1B - Hi-Feed End Mill

Ø.375-.750"
Chip Surfer Connection
4 mm insert with 4 indexes
.0236" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1B - Hi-Feed End Mill

Ø.500-.750"
TopOn Connection
4 mm insert with 4 indexes
.0236" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1D - Hi-Feed End Mill

Ø.625-1.250"
Cylindrical Shank
6 mm insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1D - Hi-Feed End Mill

Ø.625-1.000"
Chip Surfer Connection
6 mm insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1D - Hi-Feed End Mill

Ø.625-1.500"
TopOn Connection
6 mm insert with 4 indexes
.040" Max. depth of cut
Three different insert edge preparations provide application flexibility
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1F- Hi-Feed End Mill

Ø1.250-1.500"
Weldon Shank
9mm insert with 4 indexes
.060" Max. depth of cut
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1F- Hi-Feed End Mill

Ø1.000-1.500"
Cylindrical Shank
9 mm Insert with 4 indexes
.060" Max. Depth of Cut
Outboard wiper produces high-quality shoulder surface finish

GoldSFeed
15G1F- Hi-Feed End Mill

Ø1.000-1.500"
TopOn Connection
9 mm inserts with 4 indexes
.060" Max. depth of cut
Superior high-feed semi finish laid by both axial and radial wipers

GoldSFeed
15M1P - Hi-Feed End Mill

Ø 32, 35 & 40 mm
TopOn Connection
13 mm insert with 4 indexes
2.23 mm Max. depth of cut

GoldSFeed
15M1P - Hi-Feed End Mill

Ø1.250- 1.500"
Weldon Shank
13mm insert with with 4 indexes
.088" Max. Depth of Cut

GoldSFeed
5G1D - Hi-Feed Face Mill

Ø1.500-2.000”
6 mm insert with 4 indexes
.040" (1.5 mm) Max. depth of cut
12° Hi-feed rougher
Multiple insert styles for application flexibility
.040” Insert wiper, face and O.D.
Extremely free cutting!
Excellent performance & economy!

GoldSFeed
5G5F, 5G6F - Hi-Feed Face Mill

Ø2.000-3.000”
9 mm insert with 4 indexes
.060" (1.5 mm) Max. depth of cut
12° Hi-feed rougher
Multiple insert styles for application flexibility
.060” Insert wiper, face and O.D.
Extremely free cutting!
Excellent performance & economy!

GoldSFeed
5G5M, 5G6M - Hi-Feed Face Mill

Ø3.000-7.000”
19 mm insert with 4 indexes
.147" (3.7 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent Hi-Feed performance & economy!

GoldSFeed
5G5M, 5G6M - Hi-Feed Face Mill

Ø80-160 mm
19 mm insert with 4 indexes
.147" (3.7 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent Hi-Feed performance & economy!

GoldSFeed
5G5Q, 5G6Q - Hi-Feed Face Mill

Ø2.500-10.000”
16 mm insert with 4 indexes
.107" (2.7 mm) Max. depth of cut
12° Hi-feed rougher
Three different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent high feed performance & economy!
8" and 10" diameter tools do NOT have coolant through.

GoldSFeed
5M5P, 5M6P - Hi-Feed Face Mill

Ø 50-100 mm
13 mm insert with 4 indexes
.088" (2.2 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent hi-feed performance & economy!

GoldSFeed
5M5P, 5M6P - Hi-Feed Face Mill

Ø2.000-5.000”
13 mm insert with 4 indexes
.088" (2.2 mm) Max. depth of cut
12° Hi-feed rougher
Seven different insert edge preparations provide application flexibility
Extremely free cutting!
Excellent hi-feed performance & economy!

GoldSFeed
SD_S0402MPR_

4mm(.157) GoldSFeed Insert

GoldSFeed
SD_S0603MPR_

6mm GoldSFeed Insert

GoldSFeed
SD_S0904MPR_

9mm GoldSFeed Insert

GoldSFeed
SD_S1305MPR_

13mm GoldSFeed Insert

GoldSFeed
SD_S1605MPR_

16mm GoldSFeed Insert

GoldSFeed
SD_S1906MPR_

19mm GoldSFeed Insert

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø3.000-6.000"
0.187" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø4.000-8.000"
0.250" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø4.000-8.000"
0.312" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø3.000-6.000"
0.156" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Axial Drive Slotter

Ø4.000-8.000"
0.500" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH station.

Gold-Slot
3VJ4V - Radial Drive Slotter

Ø2.500- 6.000"
0.187" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Radial Drive Slotter

Ø2.500-6.000"
0.250" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Radial Drive Slotter

Ø4.000-8.000"
0.312" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Radial Drive Slotter

Ø4.000 -8.000"
0.375" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Radial Drive Slotter

Ø2.500-6.000"
0.156" Cutting Width
Inserts with 4 indexes
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - Slotting End Mill

Ø1.500-2.500"
TopOn Connection
Insert with 4 indexes
0.125" Cutting width
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - T-Slotter

Ø2.000-2.500"
TopOn Connection
Insert with 4 indexes
0.156" Cutting width
Same insert used in RH & LH stations

Gold-Slot
3VJ4V - T-Slotter

Ø2.500"
TopOn Connection
Insert with 4 indexes
0.250" Cutting width
Same insert used in RH & LH station.

Gold-Slot
3VJ4V - T-Slotter

Ø2.000-3.500"
TopOn Connection
Insert with 4 indexes
0.187" Cutting width
Same insert used in RH & LH stations

Gold-Slot
IXH211 for 3VJ4V 0.125" Width Slotters

Milling Insert
2RH/2LH Cutting Edges
Same insert used in RH & LH station

Gold-Slot
IXH311 for 3VJ4V 0.156" Width Slotters

Milling Insert
2RH/2LH Cutting Edges
Same insert used in RH & LH station

Gold-Slot
IXH312 for 3VJ4V 0.187" Width Slotters

Milling Insert
2RH/2LH Cutting Edges
Same insert used in RH & LH station

Gold-Slot
IXH412 for 3VJ4V 0.250" Width Slotters

Milling Insert
2RH/2LH Cutting Edges
Same insert used in RH & LH station

Gold-Slot
IXH413 for 3VJ4V 0.312" Width Slotters

Milling Insert
2RH/2LH Cutting Edges
Same insert used in RH & LH station

Gold-Slot
IXH414 for 3VJ4V 0.375" Width Slotters

Milling Insert
2RH/2LH Cutting Edges
Same insert used in RH & LH station

Gold-Slot
IXH415 for 3VJ4V 0.500" Width Slotters

Milling Insert
2RH/2LH Cutting Edges
Same insert used in RH & LH station

GoldTwin
CD - 5xD Combi Drill (Tip & Indexable)

Ø1.024-1.780"
Universal Shank
Two Effective
Holds +.003/-.000 on Hole Diameter
Coolant Through
Extended Length Shank For Maximum Clamping Surface
Ideal For Lathe Applications

GoldTwin
CD - 5xD Combi Drill (Tip & Indexable)

Ø26.0-45.0 mm
Universal Shank (Metric)
Two Effective
Holds +.003/-.000 on Hole Diameter
Coolant Through

GoldTwin
CD_Y Modular Combination Drill Head (Tip & Indexable)

Ø1.062-1.875" Diameter Range
2-Effective Modular Head
Self-Centering Geometry for Improved Straightness
SPGX-WG Wiper Insert for Quality Surface Finish
Guide Pads Improve Stability

GoldTwin
SPGX-WG

4 Cornered Outboard Inserts with Wiper Flats for Gold Twin
Steel & General Purpose

GoldTwin
TPC -C - Replaceable Tip

Ø .6260-.9803 (15.9-24.9 mm)
Steel/General Purpose Applications
Gold Twist modified standard replaceable tip for Gold Twin body
Grade IN2505
Holds +.002/-.000 on diameter

GoldTwin
W_Y 3xD Modular Combination Drill Body

Ø1.062-1.875" Diameter Range
Modular Design
Universal Flat Shank
Extended Length Shank for Maximum Clamping Surface
Side Port Coolant Access
Coolant Thru

GoldTwin
W_Y 5xD Modular Combination Drill Body

Ø1.062-1.875" Diameter Range
Modular Design
Universal Flat Shank
Extended Length Shank for Maximum Clamping Surface
Side Port Coolant Access
Coolant Thru

GoldTwin
W_Y 7xD Modular Combination Drill Body

Ø1.062-1.875" Diameter Range
Modular Design
Universal Flat Shank
Extended Length Shank for Maximum Clamping Surface
Side Port Coolant Access
Coolant Thru

Gold-Twist
CB-R02 - Chamfer Rings

Combines drill & chamfer in one operation
Fits Ø13-25 mm, 3xD Bodies
Fits Ø10-25 mm, 5xD & 8xD Bodies
Fits Ø11-25 mm, 12xD Bodies
2 effective, no need to slow feed rate when chamfering
Max. chamfer .118" × 45°

Gold-Twist
CRNG0802-45CD

Chamfer Insert for (2) Effective Chamfer Ring
Fits Gold Twist, Quad Twist & Quad Dr+

Gold-Twist
Gold Twist Locking Keys

Gold Twist Locking Keys

Gold-Twist
KOMT

2 Cornered Insert for Gold Twist Drill Chamfer Tool
Steel & General Purpose

Gold-Twist
TC - Tap Drill/Chamfer Replaceable Tip Drill

Universal Shank with Flange
Combines Drilling & Chamfering in One Operation
Coolant Through
Holds +.002/.000 on Hole Diameter

Gold-Twist
TC - Tap Drill/Chamfer Replaceable Tip Drill

Universal Shank with Flange (Metric)
Combines Drilling & Chamfering in One Operation
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 1.5xD Replaceable Tip Drill

Ø .2362-1.0197"
Universal Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 1.5xD Replaceable Tip Drill

Ø.2362-1.0197"
Cylindrical Shank
Coolant Through
Hold +.002/-.000 on Hole Diameter

Gold-Twist
TD - 1.5xD Replaceable Tip Drill

Ø6.0-25.9 mm
Universal Shank (Metric)
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 12xD Replaceable Tip Drill

Ø.3150-1.0197"
Cylindrical Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 12xD Replaceable Tip Drill

Ø8.0-25.9 mm
Cylindrical Shank (Metric)
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 3xD Replaceable Tip Drill

Ø 4.00-5.90 mm
Cylindrical Shank (metric)
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 3xD Replaceable Tip Drill

Ø6.0-25.9 mm
Universal Shank (Metric)
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 3xD Replaceable Tip Drill

Ø .1575-1.0197"
Cylindrical Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 3xD Replaceable Tip Drill

Ø.2362-.1.0197"
Universal Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 5xD Replaceable Tip Drill

Ø .1575-1.0197"
Cylindrical Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 5xD Replaceable Tip Drill

Ø.2362-1.0197"
Universal Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 5xD Replaceable Tip Drill

Ø6.0-25.9 mm
Universal Shank (Metric)
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 8xD Replaceable Tip Drill

Ø7.0-25.9 mm
Universal Shank (Metric)
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 8xD Replaceable Tip Drill

Ø .2362-1.0197"
Cylindrical Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 8xD Replaceable Tip Drill

Ø6.0-25.9 mm
Cylindrical Shank (Metric)
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist
TD - 8xD Replaceable Tip Drill

Ø .2756-1.0197"
Universal Shank
Coolant Through
Holds +.002/-.000 on Hole Diameter

Gold-Twist Tips
TKA - Replaceable Tip

Ø.2362-1.0197" (6.0-25.9 mm)
Cast Iron Applications
Grade IN2505
Holds +.002/-.000 on Diameter

Gold-Twist Tips
TMA - Replaceable Tip

Ø.2362-1.0197" (6.0-25.9 mm)
Stainless Steel & Exotics Applications
Grade IN2505
Holds +.002/-.000 on Diameter

Gold-Twist Tips
TNA - Replaceable Tip

Ø.2362-1.0000" (6.0-25.4 mm)
Non-Ferrous Applications
Grade IN05S
Holds +.002/-.000 on Diameter

Gold-Twist Tips
TPA - Replaceable Tip

Ø.1574"-1.0197" (4.0-25.9 mm)
Steel & General Purpose Applications
Grade IN2505
Holds +.002/-.000 on Diameter

Gold-Twist Tips
TPA -M2 - Double Margin Replaceable Tip

**-M2 GEOMETRY BEING PHASED OUT**
**SEE PHASE OUT PRODUCT BULLETIN**
Steel Geometry ISO "P" Only
Grade IN2505
Holds +.002/-.000 on Diameter, Straightness Under .002", Good Finish

Gold-Twist Tips
TPC - Self-Centering Replaceable Tip

Ø.2362-1.0197" (6.0-25.9 mm)
2-Flute Self-Centering Geometry
Steel & Cast Iron Applications
Grade IN2505
Holds +.002/-.000 on Diameter

Gold-Twist Tips
TPF - Replaceable Flat Bottom Tip

Ø.3125-1.0118" (8.0-25.7 mm)
Steel & General Purpose Applications
Grade IN2505
Holds +.002/-.000 on Diameter

Hardware
Cartridges for 4W2A Face Mills

Cartridges for 4W2A Face Mill
Depth of Cut Range: 0.078 - 0.660"
90°, Lead Angle, & Hi-Feed Options
AOMT18, SHE_15, PNC_08, RJLT19, & UNEU13 Inserts

HE-Rounds
47D/47J_RC S5 - 90° End Mill

Ø.250-1.000"
Cylindrical Shank
5 Flute, 43° Helix
Variable Pitch
Center-cutting
Corners: Sharp, .015" .030" .060" .090" .125" .188" .250" R

HiPos
12J1B - 90° Center Cut End Mill

Ø.750"
Weldon Shank
16 mm Insert with 2 indexes
Insert corner: .031" R
Ideal for Drill Mill applications
.60" Depth of cut

HiPos
12J1B - 90° End Mill

Ø.750-2.000" (Weldon)
.60" Depth of cut
16 mm Insert with 2 indexes
Insert corners: .015", .031", .062", .093", .125", .187", .250" R

HiPos
12J1M (8 mm Insert) Weldon Shank

90° End Mill
.30" Max. Depth of Cut
Insert Corner: .015" and .031" R
Insert with 2 Indexes

HiPos
12J1Q - 90° End Mill

Ø.500-1.250" (Weldon)
.50" Depth of cut
12 mm Insert with 2 indexes
Insert corners: .015", .031", .062", .093", .125", .250" R

HiPos
12J4B - 90° End Mill for Large Corner Radius

Ø1.25-1.50" (Weldon)
.60" Depth of cut
16 mm Insert with 2 indexes
Insert corners: .187" .250" R

HiPos
22J3M - 90° Fluted End Mill

Ø.750-1.00"
Weldon Shank
6 mm Insert with 2 indexes
All Eff. / RH Helix
32-63 Ra surface finishes when engaging the wiper (WEP)
Insert corners: S
Insert corners: SC: .015" .031" R

HiPos
22J5B - 90° Fluted End Mill (Weldon)

Ø2.000 Fluted End Mill (Weldon)
1/2 Effective
Insert Corner: .015" .031" .062" .093" .125" .187" & .250" R
Insert with 2 Indexes
Right Hand Helix

HiPos
22J7Q - 90° Fluted End Mill (Weldon)

Ø1.25 and 1.50" (Weldon)
All Eff. / RH Helix
12 mm Insert with 2 indexes
Insert corners: .015", .031", .062", .093", .125", .250" R

HiPos
2J1B - 90° Face Mill

Ø2.00-8.00"
.60" Depth of cut
16 mm Insert with 2 indexes
Insert corners: .015", .031", .062", .093", .125" R

HiPos
2J1Q (12 mm Insert)

90° Face Mill
.47" Max. depth of cut
Insert with 2 indexes
Insert Corner: .015", .031", .062", .093", .125" and .250"R

HiPos
APKT09T3 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Designed for multiple materials and applications
2 Indexes
Fits series 2S-TE90AP cutters

HiPos
APKT12 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Diverse corner configurations
Designed for multiple materials and applications
2 Indexes

HiPos
APKT12_HS - Insert for SS/Hi-Temp/Ti

Keen edge for SS/Hi-Temp/Ti materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
Pressed rake face geometry promotes efficient chip formation
2 Indexes

HiPos
APKT16 - Multi-Purpose Insert

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing surface finishes as good as 32 Ra
Diverse corner configurations
Designed for multiple materials and applications
2 Indexes

HiPos
APKT16_001 - Center Cut Insert

2 Index

HiPos
APKT16_HR - Multi-Purpose Pressed

Pressed rake face geometry promotes efficient chip formation
Integrated wiper flat on face for producing 32-63 Ra surface finishes
Designed for multiple materials and applications
2 Indexes

HiPos
APKT16_HS - Insert for SS/Hi-Temp/Ti

Keen edge for SS/Hi-Temp/Ti materials
Integrated wiper flat on face for producing 32-63 Ra surface finishes
Pressed rake face geometry promotes efficient chip formation
2 Indexes

HiPos-Alu
1AX2K - 90° Aluminum Router End Mill

Ø1.000-1.500"
TopOn Connection
16 mm Insert with 2 indexes
Insert corners: .015", .031", .062", .093", .125", .197" R
.63" Depth of cut
V-Shape with key drive pocket

HiPos-Alu
1AX2K - 90° Aluminum Router End Mill (Metric)

Ø25.00 - 40.00 mm
TopOn Connection
16 mm Insert with 2 indexes
Insert corners: .015", .031", .062", .093", .125", .197" R
16.00 mm Depth of cut
V-Shape with key drive pocket

HiPos-Alu
1AX2K - 90° Router for Aluminum

Ø1.000-1.500"
Cylindrical Shank
.63 Depth of cut
16 mm Insert with 2 indexes
V-Shape with key drive pocket ideal for high RPM
Insert corners: .015", .031", .062", .093", .125", .197" R

HiPos-Alu
1AX2K - 90° Router for Aluminum

Ø1.000-2.000"
HSK Connection
16 mm Insert with 2 indexes
V-Shape with key drive pocket ideal for high RPM
Insert corners: .015", .031", .062", .093", .125", .197" R
.63" Depth of cut

HiPos-Alu
1AX2Q - 90° Aluminum Router End Mill

Ø1.250-1.500"
Cylindrical Shank
22 mm Insert with 2 indexes
Insert corners: .020", .031", .062", .118", .197", .250" R
V-Shape with key drive pocket ideal for high RPM
.83" Depth of cut

HiPos-Alu
1AX2Q - 90° Aluminum Router End Mill

Ø1.250-1.500"
TopOn Connection
22 mm Insert with 2 indexes
Insert corners: .020", .031", .062", .118", .197", .250" R
V-Shape with key drive pocket
.83" Depth of cut

HiPos-Alu
AX2K - 90° Router Face Mill for Aluminum

Ø2.000-6.000"
16 mm Insert with 2 Indexes
.63" Depth of Cut
V-Shape with key drive pocket ideal for high RPM
Finishes as good as 15 Ra
Insert Corners: .015", .031", .062", .094", .125", .197" R

HiPos-Alu
AX2Q - 90° Router Face Mill for Aluminum

Ø2.000-6.000"
22 mm Insert with 2 indexes
.83" Depth of Cut
V-Shape with key drive pocket ideal for high RPM
Finishes as good as 15 Ra
Insert corners: .020", .031", .062", .118", .197", .250" R

HiPos-Alu
XEVT16_P - Insert for Non-Ferrous

Up-sharp edge & polished rake face for non-ferrous materials
Integrated wiper for surface finishes as good as 15 Ra
2 Indexes

HiPos-Alu
XEVT22_P - Insert for Non-Ferrous

Up-sharp edge & polished rake face for non-ferrous materials
Integrated wiper for surface finishes as good as 15 Ra
2 Indexes

HiPos-Micro
12_1D - Chamfer Mill

Ø10 mm Min.
Cylindrical Shank (Metric)
6 mm Insert with 2 indexes
Cutting Edge Angles: 30°, 45°, 60°
Included Angles: 120°, 90°, 60°
Shank modifications can be made by cutting off the back to desired length